Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Electrical Characteristics of Piezoelectric Transformer using Low Temperature Sintering PCW-PMN-PZT Ceramics

저온소결 PCW-PMN-PZT 세라믹스를 적용한 압전변압기의 전기적 특성

  • Published : 2006.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, piezoelectric transformer was manufactured at the sintering temperature of $950^{\circ}C$, and then the feasibility of application to low temperature sintering piezoelectric transformers was investigated by evaluating the electrical characteristics of it. The voltage ratio of piezoelectric transformer showed the maximum value at the resonant frequency of input part, and increased according to the increase of load resistance. The output power and efficiency of piezoelectric transformer showed the superior properties when the output impedance of it coincides with the load resistance. Piezoelectric transformer manufactured at the low temperature of $950^{\circ}C$ showed the heat generation less than $20^{\circ}C$ at the output power of 30 W, and stable driving characteristics.

Keywords

References

  1. K. Nagata, J. Thongrueng, and K. Kato, 'Evaluation of the reliability of piezoelectric ceramic transformers', Jpn. J. Appl. Phys., Vol. 36, No. 9B, p. 6103, 1997
  2. O. Ohnishi, Y. Sasaki, T. Zaitsu, H. Kishie, and T. Inoue, 'Piezoelectric ceramic transformer for power supply operating in thickness extensional vibration mode', IEICE Trans. Funda., Vol. E77-A, No. 12, p. 2098, 1994
  3. T. Zaitsu, 'AC/DC converter with a piezoelectric transformer', US Patent, No. 5969954, 1999
  4. S. Hirose, N. Magami, and S. Takahashi, 'Piezoelectric ceramic transformer using piezoelectric lateral effect on input and output', Jpn. Appl. Phys., Vol. 35, No. 5B, p, 3038, 1996
  5. J. Yoo, K. Yoon, Y. Lee, S. Suh, J. Kim, and C. Yoo, 'Electrical characteristics of the contour-vibration-mode piezoelectric transformer with ring/dot electrode area ratio', Jpn. J. Appl. Phys., Vol. 39, No. 5A, p. 2680, 2000 https://doi.org/10.1143/JJAP.39.2680
  6. 이용우, 류주현, 윤광희, 정희승, 서성재, 김종선, 'PSN-PZT계 세라믹스를 이용한 고출력압 전트랜스포머의 전기적 특성', 한국전기전자재료학회논문지, 13권, 4호, p. 286, 2000
  7. T. Endow and S. Hirose, 'Multilayered piezoelectric transformers for small power supplies', Jpn. Appl. Phys., Vol. 42, No. 9B, p. 6128, 2003 https://doi.org/10.1143/JJAP.42.6128
  8. S. Priya, S. Ural, H. W. Kim, K. Uchino, and T. Ezaki, 'Multilayered unipoled piezoelectric transformers', Jpn, J. Appl. Phys., Vol. 43, No. 6A, p. 3503, 2004 https://doi.org/10.1143/JJAP.43.3503
  9. R. Zno, L. Li, and Z. Gui, 'Modified cofiring behaviors between PMN - PNN - PZT piezo- electric ceramics and PZT-doped 70Ag-30Pd alloy metallization', Mat. Sci. Eng., Vol, A326, p. 202, 2002
  10. C.-W. Ahn and K. Uchino, 'Effect of CuO and ZnO additives on sintering temperature and piezoelectric properties of 0.41$Pb(Ni_{1/3}Nb_{2/3})O_3-0.36PbTiO_3-0.23PbZrO_3$ Ceramics', Jpn. J. Appl. Phys., Vol, 43, No.1, p. 205, 2004 https://doi.org/10.1143/JJAP.43.205
  11. K. Shiratsuyu, K. Hayashi, A. Ando, and Y. Sakabe, 'Piezoelectric characterization of low-temperature-fired Pb(Zr,Ti)$O_3-Pb(Ni,Nb)O_3$ Ceramics', Jpn. J. Appl. Phys., Vol. 39, No. 9B, p. 5609, 2000 https://doi.org/10.1143/JJAP.39.5609
  12. 박창엽, '압전 세라믹스', 김영사, p. 203, 1987
  13. 要祐一, '壓電セラミックトランス用素子の考察', 日本音響學會誌, 32卷, 8號, p. 470, 1976
  14. Y. Gao, Y. Chen, J. Ryu, K. Uchino, and D. Viehland, 'Eu and Yb substituent effects on the properties of $Pb(Zr_{0.52}Ti_{0.48})O_3-Pb(Mn_{1/3}Sb_{2/3})O_3$ ceramics: Development of a new high-power piezoelectric with enhanced vibrational velocity', Jpn. J. Appl. Phys., Vol. 40, No. 2A, p, 687, 2001 https://doi.org/10.1143/JJAP.40.687