• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.7
• /
• pp.116-126
• /
• 1996

In this paper, we propose a new termination rule for the iterative restoration of degraded images, by which the number of iterations can be dramatically reduced. This rule uses a parameter, called noise suppression factor (NSF), to appropriately teminate the iteration process, reduces a lot the computational load, and avoids the amplification of noise for the better quality. We also propose a method using the morphological filters, when applied to the resulting image, that will significantly reduce the ringing effect which would otherwise exist in the boundary of the image. Simulation with the blurred lena image with gaussian noise showns that the proposed termination rule combined with the morphological filtering gives the restored image with much improved quality.

• Journal of Korea Multimedia Society
• /
• v.22 no.1
• /
• pp.10-17
• /
• 2019

In High Dynamic Range (HDR) image processing, tone mapping is the process to compress an input image into a Low Dynamic Range (LDR) image. In most cases, the reason that detail preservation is prior to take over tone mapping is that the dynamic range is significantly different between input and output images. In the case of iCAM06, details are separated by using a bilateral filter, however, it causes noise amplification at the dim surround region. Thus, we suggest that the detail signal, which is separated from the bilateral filter, is combined with the base signal after an adaptive Kalman filter is applied according to the local standard deviation. We confirmed that the proposed method enhances the HDR images quality by checking the noise reduction in a dim surround region.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.150-156
• /
• 2008

An applied technique of contrast enhancement for X-ray image is proposed which is based on combined enhancement of scaling and wavelet coefficients in discrete wavelet transform space. Conventional contrast enhancement methods such as contrast limited adaptive histogram equalization (CLAHE), multi-scale image contrast amplification (MUSICA) and gamma correction were applied on scaling coefficients to enhance the contrast of an original. In order to enhance the detail as well as reduce the blurring caused by up scaling of contrast modified scale coefficients from lower resolution, the sigmoid manipulation function was used to manipulate wavelet coefficients. The contrast detail mammography (CDMAM) phantom was imaged and processed to measure the image line profile of results and contrast to noise ratio (CNR) comparatively. The proposed technique produced better results than direct application of various contrast enhancement methods on image itself. The proposed method can enhance contrast, and also suppress the amplification of noise components in a single process. It could be useful for various applications in medical, industrial and graphical images where contrast and detail are of importance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.141-147
• /
• 2000

In the restoration of degraded noisy motion blurred image, we have trade-off problem between smoothing the noise and restoration of the edge region. While the noise is smoothed, die edge or details will be corrupted. On the other hand, restoring the edge will amplify the noise. To solve this problem we propose an adaptive algorithm which uses I- H regularization operator for flat region and Laplacian regularization operator for edge region. Through the experiments, we verify that the proposed method shows better results in the suppression of the noise amplification in flat region, introducing less ringing artifacts in edge region and better ISNR than those of the conventional ones.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2300-2307
• /
• 2008

This study receives the noise transmitted in a constant audio frequency range through a microphone array in which the noise(like grease in a pan) occurs on the power supply line due to the troublesome partial discharge(arc). Then by going through a series of signal processing of removing noise, this study measures the distance and direction up to the noise caused by the troublesome partial discharge(arc) and monitors the result by displaying in the analog and digital method. After these, it determines the state of each size and judges the distance and direction of problematic part. When the signal sound transmitted by the signal source of bad insulator is received on each microphone, the signal comes only in the frequency range of 20 kHz by passing through the circuit of amplification and 6th low pass filter. Then, this signal is entered in a digital value of digital signal processing(TMS320F2812) through the 16-bit A/D conversion. By doing so, the sound distance, direction and coordinate of bad insulator can be detected by realizing the correlation method of detecting the arriving time difference occurring on each microphone and the algorithm of detecting maximum time difference.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4570-4575
• /
• 2023

Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.3
• /
• pp.258-263
• /
• 2011

The direction of the cutting tool plays a critical role in elliptical vibration cutting(EVC) where the cutting tool cuts workpiece in a trochoidal motion. In this study, EVC cutting device was developed using two parallel piezoelectric materials and it was observed that the rotation direction of the tool reverses as the EVC device undergoes resonance at which either flexural(cutting direction) or longitudinal( thrust direction) mode shapes occurs. To analytically explain reversal of the rotation direction, kinematic motion analysis of the tool was modified to incorporate amplification of the vibration amplitude and phase introduced by resonance. It successfully demonstrated, through Matlab simulation, reversal of the rotation direction of the cutting tool as the excitation frequency increases beyond resonance frequencies at which either flexural or longitudinal vibration occurs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.50-58
• /
• 2004

An image enhancement method using modified anisotropic diffusion filter is proposed in this paper. It employs sensor noise estimation and scale space methods based on the minimum reliable scale. Then the anisotropic diffusion filter is modified by the calculated critical value function and local gradient. Through simulation, it is verified that the proposed algorithm has the capability of little or no noise amplification in homogenous region as well as superior edge enhancement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.45-49
• /
• 2004

An image enhancement method using modified anisotropic diffusion filter is proposed in this paper. It employs sensor noise estimation and scale space methods based on the minimum reliable scale. Then the anisotropic diffusion filter is modified by the calculated critical value function and local gradient. Through simulation, it is verified that the proposed algorithm has the capability of little or no noise amplification in homogenous region as well as superior edge enhancement.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2006

A novel all-optical gain-controlled (AOGC) bidirectional amplifier is proposed and demonstrated in a compact structure. The AOGC function using fiber Bragg grating (FBG) pairs controls both directional signals independently, and combinations of optical interleavers and isolators suppress Rayleigh backscattering (RB) noise. The amplifier achieves high and constant gain with a wide dynamic input signal range and low noise figure. The performance does not depend on the input signal conditions, whether static-state or transient signals, or whether there is symmetric or asymmetric data traffic on bidirectional transmission. Transmission comparison experiments between invariable symmetrical and random variable asymmetric bidirectional data traffic verify that the all-optical gain control and bidirectional amplification functions are successfully combined into this proposed amplifier.