• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.427-438
• /
• 2023

Biocide dichlofluanid breaks down quickly and accumulates easily in sediment, potentially causing a persistent impact on various marine organisms. We analyzed the potential toxicity of dichlofluanid on major aquaculture species in Korea, Undaria pinnatifida. Female gametophytes of U. pinnatifida were exposed to dichlofluanid at concentrations of 0, 1, 2, 4, 8, 16, and 32 mg L^-1, and their survival and relative growth rate were analyzed. The no observed effect concentration(NOEC), lowest observed effect concentration (LOEC), and median lethal concentration (LC₅₀) for female gametophyte survival were determined as 1, 2, and 10.82 (95% CI: 8.87-13.23) mg L^-1, respectively. The NOEC, LOEC, and median effective concentration (EC₅₀) for relative growth rate were 1, 2, and 6.58 (95% CI: 6.03-7.17) mg L^-1, respectively. Female gametophytes of U. pinnatifida were expected to experience toxic effects at concentrations above 2 mg L^-1 of dichlofluanid. These research findings are expected to serve as important reference data for evaluating the toxicity effects of U. pinnatifida in its early life stages when exposed to dichlofluanid.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1925-1931
• /
• 2024

The study conducted in the northwest region of Jordan aimed to assess the levels of natural radioactivity in soil and olive mill pomace (OMP) samples. The researchers used Nal (TI) gamma-ray spectrometry to measure the activity concentrations of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs in the samples. The average activity concentrations of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs in the soil samples were found to be 18.624 ± 5.82, 12.276 ± 5.728, 518.33 ± 212.57, and 0.140 ± 0.09 (Bq, kg^-1), respectively. In the OMP samples, the average activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were 7.272 ± 4.386, 3.454 ± 1.503, and 169.997 ± 81.873 (Bq kg^-1), respectively, and no ¹³⁷Cs was detected. The study also investigated fundamental parameters associated with radon, specifically the radon emanation coefficient (Rn_EC) and radon mass exhalation rate (E_x). The Rn_EC values ranged from 0.621 to 0.78 (Bq kg^-1), with an average value of 0.71 ± 0.06 (Bq kg^-1). The estimated E_x from the soil samples ranged from 65.83 to 124.86 (mBq kg^-1h^-1), with an average value of 99.74 ± 21.73 (mBq kg^-1h^-1). Regarding radiological hazards, the study examined various parameters, including radium equivalent activity, external and internal hazard indices, gamma and alpha indices, absorbed gamma dose rate, and excess lifetime cancer risk. All of these assessed values were found to be below the worldwide recommended limits for radiological safety. Additionally, the study analyzed the concentrations of gross alpha and gross beta radioactivities in soil and OMP samples. The soil samples had an average gross alpha activity of 4.642 ± 1.04 (Bq kg^-1) and an average gross beta activity of 48.13 ± 14.50 (Bq kg^-1). The OMP samples showed an average gross alpha activity of 0.32 ± 0.27 (Bq kg^-1) and an average gross beta activity of 59.19 ± 12.94 (Bq kg^-1). Overall, the obtained results are crucial for evaluating the radiological risks associated with natural radioactivity in the northwest region of Jordan. The findings establish baseline data for comparison and reference for radioactivity levels in the environment.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.20.1-20.12
• /
• 2022

Background: In the manufacturing industry, work-family conflict (WFC) is related to working hour characteristics. Earlier studies on the relationship between working hour characteristics and WFC in the manufacturing industry have been limited to some regions in Korea. No study has addressed the data on a national scale. Thus, this study investigated the impact of weekly working hours, weekend work, and shift work on WFC using national-scale data. Methods: This study was based on the fifth Korean Working Conditions Survey of 5,432 manufacturers. WFC consists of 5 variables; WFC1 "kept worrying about work"; WFC2 "felt too tired after work"; WFC3 "work prevented time for family"; WFC4 "difficult to concentrate on work"; WFC5 "family responsibilities prevented time for work". As WFC refers to the inter-role conflict between the need for paid work and family work, WFC has been measured in two directions, work to family conflict (WTFC: WFC1, 2, 3) and family to work conflict (FTWC: WFC4, 5). With these WFC variables, we conducted multiple logistic analyses to study how working hours, weekend work, and shift work impact WFC. Results: Korean manufacturers' prolonged working hours increased all aspects of WFCs. Odds ratios (ORs) of WFCs based on working hours (reference of under 40 hours) of 41-52, 53-60, over 61 were 1.247, 1.611, 2.279 (WFC1); 1.111, 2.561, 6.442 (WFC2); 1.219, 3.495, 8.327 (WFC3); 1.076, 2.019, 2.656 (WFC4); and 1.166, 1.592, 1.946 (WFC5), respectively. Shiftwork in the WFC2 model showed a significantly higher OR of 1.390. Weekend work 'only on Saturday' had significant ORs with WFC2 (1.323) and WFC3 (1.552). Conclusions: An increase in working hours leads to the spending of less time attending to problems between work and family, causing both WTFC and FTWC to increase. As weekends, evenings, and nighttime are considered to be family-friendly to people, working on weekends and shift-work were highly correlated to WTFC.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.40.1-40.9
• /
• 2022

Background: According to the occupational accident status analysis in 2020, of 1,180 occupational deaths, 463 were caused by cardiovascular disease (CVD). Workers should be assessed for CVD risk at regular intervals to prevent work-related CVD in accordance with the rules on occupational safety and health standards. However, no previous study has addressed risk and mortality. Therefore, this longitudinal study was conducted to evaluate the relationship between 10-year cardiovascular risk of the general health checkup and mortality. Methods: The study included 545,859 participants who visited Kangbuk Samsung Total Healthcare Centers from January 1, 2002, to December 31, 2017. We performed 10-year cardiovascular risk assessment for the participants and the risk was divided into 4 groups (low, moderate, high, and very high). The study used death data from the Korea National Statistical Office for survival status as an outcome variable by December 31, 2019, and the cause of death based on the International Classification of Diseases, 10^th Revision (ICD-10) was identified. Statistical analysis was performed using Cox proportional hazards regression analysis, and the sum of the periods from the first visit to the date of death or December 31, 2019, was used as a time scale. We also performed a stratified analysis for age at baseline and sex. Results: During 5,253,627.9 person-years, 4,738 overall deaths and 654 cardiovascular deaths occurred. When the low-risk group was set as a reference, in the multivariable-adjusted model, the hazard ratios (HRs) (95% confidence interval [CI]) for overall mortality were 3.36 (2.87-3.95) in the moderate-risk group, 11.08 (9.27-13.25) in the high-risk group, and 21.20 (17.42-25.79) in the very-high-risk group, all of which were statistically significant. In cardiovascular deaths, the difference according to the risk classification was more pronounced. The HRs (95% CI) were 8.57 (4.95-14.83), 38.95 (21.77-69.69), and 78.81 (42.62-145.71) in each group. As a result of a subgroup analysis by age and sex, the HRs of all-cause mortality and cardiovascular mortality tended to be higher in the high-risk group. Conclusions: This large-scale longitudinal study confirmed that the risk of death increases with the 10-year cardiovascular risk of general health checkup.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.7
• /
• pp.1484-1490
• /
• 2024

The gut microbiota is a key factor significantly impacting host health by influencing metabolism and immune function. Its composition can be altered by genetic factors, as well as environmental factors such as the host's surroundings, diet, and antibiotic usage. This study aims to examine how the characteristics of the gut microbiota in pigs, used as source animals for xenotransplantation, vary depending on their rearing environment. We compared the diversity and composition of gut microbiota in fecal samples from pigs raised in specific pathogen-free (SPF) and conventional (non-SPF) facilities. The 16S RNA metagenome sequencing results revealed that pigs raised in non-SPF facilities exhibited greater gut microbiota diversity compared to those in SPF facilities. Genera such as Streptococcus and Ruminococcus were more abundant in SPF pigs compared to non-SPF pigs, while Blautia, Bacteroides, and Roseburia were only observed in SPF pigs. Conversely, Prevotella was exclusively present in non-SPF pigs. It was predicted that SPF pigs would show higher levels of processes related to carbohydrate and nucleotide metabolism, and environmental information processing. On the other hand, energy and lipid metabolism, as well as processes associated with genetic information, cell communication, and diseases, were predicted to be more active in the gut microbiota of non-SPF pigs. This study provides insights into how the presence or absence of microorganisms, including pathogens, in pig-rearing facilities affects the composition and function of the pigs' gut microbiota. Furthermore, this serves as a reference for tracing whether xenotransplantation source pigs were maintained in a pathogen-controlled environment.

• Journal of Bio-Environment Control
• /
• v.33 no.2
• /
• pp.120-128
• /
• 2024

Since ChatGPT was released in 2022, the generative artificial intelligence (AI) industry has seen massive growth and is expected to bring significant innovations to cognitive tasks. AI-based image generation, in particular, is leading major changes in the digital world. This study investigates the technical foundations of Midjourney, Stable Diffusion, and Firefly-three notable AI image generation tools-and compares their effectiveness by examining the images they produce. The results show that these AI tools can generate realistic images of tomatoes, strawberries, paprikas, and cucumbers, typical crops grown in greenhouse. Especially, Firefly stood out for its ability to produce very realistic images of greenhouse-grown crops. However, all tools struggled to fully capture the environmental context of greenhouses where these crops grow. The process of refining prompts and using reference images has proven effective in accurately generating images of strawberry fruits and their cultivation systems. In the case of generating cucumber images, the AI tools produced images very close to real ones, with no significant differences found in their evaluation scores. This study demonstrates how AI-based image generation technology can be applied in agriculture, suggesting a bright future for its use in this field.

• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.143-156
• /
• 2005

Background: The best dose-fractionation regimen of the definitive radiotherapy for cervix cancer remains to be clearly determined. It seems to be partially attributed to the complexity of the affecting factors and the lack of detailed information on external and intra-cavitary fractionation. To find optimal practice guidelines, our experiences of the combination of external beam radiotherapy (EBRT) and high-dose-rate intracavitary brachytherapy (HDR-ICBT) were reviewed with detailed information of the various treatment parameters obtained from a large cohort of women treated homogeneously at a single institute. Materials and Methods: The subjects were 743 cervical cancer patients (Stage IB 198, IIA 77, IIB 364, IIIA 7, IIIB 89 and IVA 8) treated by radiotherapy alone, between 1990 and 1996. A total external beam radiotherapy (EBRT) dose of $23.4\~59.4$ Gy (Median 45.0) was delivered to the whole pelvis. High-dose-rate intracavitary brachytherapy (HDR-IBT) was also peformed using various fractionation schemes. A Midline block (MLB) was initiated after the delivery of $14.4\~43.2$ Gy (Median 36.0) of EBRT in 495 patients, while In the other 248 patients EBRT could not be used due to slow tumor regression or the huge initial bulk of tumor. The point A, actual bladder & rectal doses were individually assessed in all patients. The biologically effective dose (BED) to the tumor ($\alpha/\beta$=10) and late-responding tissues ($\alpha/\beta$=3) for both EBRT and HDR-ICBT were calculated. The total BED values to point A, the actual bladder and rectal reference points were the summation of the EBRT and HDR-ICBT. In addition to all the details on dose-fractionation, the other factors (i.e. the overall treatment time, physicians preference) that can affect the schedule of the definitive radiotherapy were also thoroughly analyzed. The association between MD-BED $Gy_3$ and the risk of complication was assessed using serial multiple logistic regression models. The associations between R-BED $Gy_3$ and rectal complications and between V-BED $Gy_3$ and bladder complications were assessed using multiple logistic regression models after adjustment for age, stage, tumor size and treatment duration. Serial Coxs proportional hazard regression models were used to estimate the relative risks of recurrence due to MD-BED $Gy_{10}$, and the treatment duration. Results: The overall complication rate for RTOG Grades $1\~4$ toxicities was $33.1\%$. The 5-year actuarial pelvic control rate for ail 743 patients was $83\%$. The midline cumulative BED dose, which is the sum of external midline BED and HDR-ICBT point A BED, ranged from 62.0 to 121.9 $Gy_{10}$ (median 93.0) for tumors and from 93.6 to 187.3 $Gy_3$ (median 137.6) for late responding tissues. The median cumulative values of actual rectal (R-BED $Gy_3$) and bladder Point BED (V-BED $Gy_3$) were 118.7 $Gy_3$ (range $48.8\~265.2$) and 126.1 $Gy_3$ (range: $54.9\~267.5$), respectively. MD-BED $Gy_3$ showed a good correlation with rectal (p=0.003), but not with bladder complications (p=0.095). R-BED $Gy_3$ had a very strong association (p=<0.0001), and was more predictive of rectal complications than A-BED $Gy_3$. B-BED $Gy_3$ also showed significance in the prediction of bladder complications in a trend test (p=0.0298). No statistically significant dose-response relationship for pelvic control was observed. The Sandwich and Continuous techniques, which differ according to when the ICR was inserted during the EBRT and due to the physicians preference, showed no differences in the local control and complication rates; there were also no differences in the 3 vs. 5 Gy fraction size of HDR-ICBT. Conclusion: The main reasons optimal dose-fractionation guidelines are not easily established is due to the absence of a dose-response relationship for tumor control as a result of the high-dose gradient of HDR-ICBT, individual differences In tumor responses to radiation therapy and the complexity of affecting factors. Therefore, in our opinion, there is a necessity for individualized tailored therapy, along with general guidelines, in the definitive radiation treatment for cervix cancer. This study also demonstrated the strong predictive value of actual rectal and bladder reference dosing therefore, vaginal gauze packing might be very Important. To maintain the BED dose to less than the threshold resulting in complication, early midline shielding, the HDR-ICBT total dose and fractional dose reduction should be considered.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.4
• /
• pp.4-14
• /
• 1974

The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

• Journal of dental hygiene science
• /
• v.10 no.1
• /
• pp.39-44
• /
• 2010

The purpose of this study is to cover dental hygienists who work for metropolitan dental hospitals or clinics in Seoul city, Incheon city and Gyeonggi province from January to April 2009 and profile their awareness of Long-term Senior Care Insurance System (hereinafter called 'LSCI (System)', so that it may provide material reference data to contribute to expanding and establishing oral health medical services in the framework of LSCI System. As a result, this study could come to the following conclusions: 1. It was found that the highest priority of dental hygienists' visiting oral hygienic services under LSCI System was focused on 'caring and preventive treatment', and their secondary priority was focused upon 'oral health education.' 2. In response to a question item about whether dental hygienists need dentist's prescription in written before performing their visiting oral hygienic services, it was found that 38.2% dental hygienists answered 'Yes (necessary)' and 61.8% answered 'No (unnecessary).' 3. In response to a question item about whether dental hygienists may open up long-term senior care center, it was found that absolute majority of dental hygienists (93.4%) answered 'No' and only 6.6% dental hygienists answered 'Yes.' The standardized professional education are thought to be needed to be developed aiming at the success in oral-hygiene service within a LSCI, by strengthening professionalism in dental hygienists.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.307-314
• /
• 2013

Purpose: The aim of this study was to evaluate the effect of immobilization of the recombinant human bone morphogenetic protein 2 (rhBMP-2) on anodized titaum implants coated with heparin to enhance the vertical alveolar ridge augmentation in the supraalveolar peri-implant defect region. Materials and methods: 18 pure titanium implants (7.0 mm in length, 3.5 mm in diameter) were manufactured for this study. All implants were anodized and designed insertion reference line marked with laser at the apical 2.5 mm from the fixture platform. Implantation of 6 noncoated anodized implants (Control group), 6 anodized implants physically adsorbed with rhBMP-2 by dip and dry method (BMP group) and 6 anodized implants chemically immobilized 3,4-dihydroxyphenylalanine (DOPA)-heparin/ rhBMP-2 (Hep-BMP group) was performed in the both mandibular of three male adult beagle dogs using split-mouth design. Radiologic examinations were performed immediately after implant placement and 4 and 8 weeks after implant placement. The amount of mesio-distal bone augmentation was evaluated by measuring the vertical distance from the platform to the marginal bone. Statistical analysis was performed using one-way analysis of variance (SPSS version 18.0) and multiple comparison analysis of The Kruskal-Wallis test and the Mann-Whitney U test. Statistical significance was established at the 5% significant level. Results: At the 4 weeks vertical alveolar ridge augmentation of Control group, BMP group and Hep-BMP group is $0.09{\pm}0.22mm$, $1.02{\pm}0.72mm$, and $1.29{\pm}0.51mm$, At the 8 weeks $0.11{\pm}1.26mm$, $1.11{\pm}0.58mm$, $1.59{\pm}0.79mm$ according to radiographic observations. The two experimental groups showed a significantly increasing in vertical bone height compared with the control group (P<.05). However, there is no significant difference between the BMP group and Hep-BMP group (P>.05). Conclusion: The rhBMP-2 coated implants were enhanced the vertical bone growth in the supraalveolar peri-implant defect area. However, there is no significant difference between chemically and physically coating method.