• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1637-1639
• /
• 2000

Resister networks are used widely in many, high frequency applications for attenuators. In this paper we studied the frequency characteristics of attenuator using network analyzer and compared Ni-Cr thin film resistor with thick film resistor attenuator. Also from return loss, insertion loss and VSWR we obtained the maximum available frequency of these attenuators.

• The Korean Journal of Ceramics
• /
• v.6 no.4
• /
• pp.405-407
• /
• 2000

Polycrystalline films of Ni- and Co-ferrites films are prepared from aqueous solution at $90^{\circ}C$ by ferrite plating, which are subjected to Fe$^57$ conversion electron Mossbauer spectroscopy in backscatter mode. The average angle of Fe spins relative to the film plane is evaluated as 18 degree and 82 degree for the Ni- and Co-ferrite films, respectively, indicating a prominent magnetic anisotropy parallel and perpendicular to the film plane. It was also verified by the magnetization measurements.

• Journal of the Korean institute of surface engineering
• /
• v.22 no.4
• /
• pp.161-167
• /
• 1989

Effects of bath composition on electroless deposition of Ni-W-B from sulphate solution were invesrigated in terms of deposition kinetics, electro resistivity and composition of deposit film. The microstruigated and crystataine structure of the films were also studied using a scanning electron microscope and X-ray diffractometer. The deposition rate increased linearly with increasing the concentration of nickel sulphate in bath solution, wheras the rate decreasing with sodium citrate. The rate was also affected by sodium tungstate, which was maaximum at the concentration of 0.06 M/1 in sodium tungstate, The content of W in the deposit increased with increased with increasing the sodium citrate had on opposite effect on the composition of W and B in the deposit. The crystal change film from armorphous to cryatallicne nature by heat treatments was proved by the reduction of specific resistance and X-ray diffration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.337-338
• /
• 2006

The 200 nm thick-NiCr films grew on $SiO_2$/Si substrates at various deposition temperatures by a dc magnetron co-sputtering technique were characterized for the variation of film texture. The resistivity of the films decreases with increasing deposition temperature and temperature coefficient of electrical resistance (TCR) varies from negative value to a positive one with increasing deposition temperature. The NiCr films deposited at $300^{\circ}C$ exhibit 4 ppm/K being near zero TCR, resulting in TCR suitable for $\pi$-type attenuator applications.

• Journal of the Korean Vacuum Society
• /
• v.9 no.1
• /
• pp.48-59
• /
• 2000

Electrochromic NiO films were prepared by using an electron-beam deposition method. The influence of the preparation conditions, especially the substrate temperature, on the electrochemical stability of film was investigated. The optical properties and stability of as-deposited films strongly depended on the substrate temperature during deposition. The NiO film prepared at a substrate temperature of 150~$200^{\circ}C$ was found to be the stabel when subjected to 5000cycles in a 0.5M solution of KOH between -6.0 and +0.8V. The best electrochromic parameters after 5000cycles were obtained for samples with substrate temperature of $150^{\circ}C$. The obtained electrochromic parameters are CE=-0.049($\lambda$=550nm), $\Delta$OD=0.88($\lambda$=550nm)$\textrm{cm}^2$/mC, Qin=-18.11mC/$\textrm{cm}^2$ and Qleft= 14.8mC/$\textrm{cm}^2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.08a
• /
• pp.113-113
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.618-618
• /
• 2013

Graphene is only one atom thick planar sheet of sp2-bonded carbon atoms arranged in a honeycomb crystal lattice, which has flexible and transparent characteristics with extremely high mobility. These noteworthy properties of graphene have given various applicable opportunities as electrode and/or channel for various flexible devices via suitable physical and chemical modifications. In this work, for the development of all-graphene devices, we performed to synthesize alternately patterned structure of mono- and multi-layer graphene by using the patterned Ni film on Cu foil, having much different carbon solid solubilities. Depending on the process temperature, Ni film thickness, introducing occasion of methane and gas ratio of CH4/H2, the thickness and width of the multi-layer graphene were considerably changed, while the formation of monolayer graphene on just Cu foil was not seriously influenced. Based on the alternately patterned structure of mono- and multi-layer graphene as a channel and electrode, respectively, the flexible TFT (thin film transistor) on SiO2/Si substrate was fabricated by simple transfer and O2 plasma etching process, and the I-V characteristics were measured. As comparing the change of resistance for bending radius and the stability for a various number of repeated bending, we could confirm that multi-layer graphene electrode is better than Au/Ti electrode for flexible applications.

• Journal of the Korean institute of surface engineering
• /
• v.15 no.1
• /
• pp.11-18
• /
• 1982

80% Ni-Permalloy is soft magnetic material with high initial permeability and low magnetic coercive force Hc, and is used to computer memory cores and minirelays of communication e-ngineering. In this paper 80 Permalloy thin film on copper cathode was alloy-deposited from Watts so-lution contatining FeSO4$.$7H2O. The amount of FeSO4$.$7H2O in the solution, pH, temperature of the solution and plating current density were varied as parameters and the resulting comp-osition changes of deposited film were analyzed electrochemically with respect to the parame-ters. From the above procedure electroplating conditions for deposition of 80 Permalloy were est-ablished as following: 17-21 g/$\ell$ of FeSO4$.$7H2O in Watts solution, current density 1.0-2.0 Amp/dm2, pH 2.5-3.0 and temperature range of 50-60$^{\circ}C$.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.2
• /
• pp.47-51
• /
• 2008

In this paper, thermal stability of Nickel silicide formed on p-type silicon wafer using Ni-V alloy film was studied. As compared with pure Ni, Ni-V shows better thermal stability. The addition of Vanadium suppresses the phase transition of NiSi to $NiSi_2$ effectively. Ni-V single structure shows the best thermal stability compared with the other Ni-silicide using TiN and Co/TiN capping layers. To enhance the thermal stability up to $650^{\circ}C$ and find out the optimal thickness of Ni silicide, different thickness of Ni-V was also investigated in this work.

• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.134-139
• /
• 1995

We produced $(Co_{93}Cr_{7})-P-Ni$ thin films for longitudinal magnetic recording media using OC magnetron sputtering system The variation of magnetic properties of $(Co_{93}Cr_{7})-P-Ni$ pseudo-ternary system with the composition was examined. We obtained the coercivity up to 1500 Oe. The coercivity iocrease could be ascribed to in-plane anisotropy enhaocement, grain size decrease, magnetic decoupling between particles. TEM micrographs showed that the grains were well-decoupled by the addition of phosphorous.