• 한국수소및신에너지학회논문집
• /
• 제13권4호
• /
• pp.259-269
• /
• 2002

A battery based on the lithium/elemental sulfur redox couple has the advantage of high theoretical specific capacity of 1,675 mAh/g-sulfur. However, Li/S battery has bad cyclic durability at room temperature due to sulfur active material loss resulting from lithium polysulfide dissolution. To improve the cycle life of Li/S battery, PEGDME (Poly(ethylene glycol) dimethyl ether) 500 containing 1M LiTFSI salt which has high viscosity was used as electrolyte to retard the polysulfide dissolution and nano-sized $Mg_{0.6}Ni_{0.4}O$ was added to sulfur cathode as additive to adsorb soluble polysulfide within sulfur cathode. From experimental results, the improvement of the capacity and cycle life of Li/S battery was observed( maximum discharge capacity : 1,185 mAh/g-sulfur, C50/C1 = 85 % ). Through the charge-discharge test, we knew that PEGDME 500 played a role of preventing incomplete charge-discharge $behavior^{1,2)$. And then, in sulfur dissolution analysis and rate capability test, we first confirmed that nano-sized $Mg_{0.6}Ni_{0.4}O$ had polysulfide adsorbing effect and catalytic effect of promoting the Li/S redox reaction. In addition, from BET surface area analysis, we also verified that it played the part of increasing the porosity of sulfur cathode.

• 한국진공학회지
• /
• 제22권6호
• /
• pp.277-284
• /
• 2013

아세틸렌과 수소기체를 원료기체로 하고 육불화황을 첨가기체로 하여 열화학 기상 증착하에서 탄소코일을 합성하였다. 이 때 산화실리콘 기판위의 니켈막을 탄소코일 성장의 촉매로 사용하였다. 성장된 탄소코일의 생성밀도, 형상, 기하구조 등을 수소 플라즈마 전처리의 유무에 따라 조사하였다. 상대적으로 짧은 시간(1분)의 수소 플라즈마 전처리는 탄소 마이크로 코일을 우세하게 성장시켰다. 긴 시간(30분)동안의 수소플라즈마 전처리는 탄소마이크로 성장 축을 따라 수많은 탄소 나노코일이 들어붙어 있는 특이한 구조를 보였다. 이 특이한 구조는 매우 작은 니켈 촉매의 알갱이를 효과적으로 지지할 수 있는 촉매 지지대로서의 역할을 할 수 있을 것으로 예견되었다.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.147-151
• /
• 2014

A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.44-47
• /
• 2001

Ni 전극을 사용하는 $BaTiO_3$계 내환원성 X7R 조성에서 $Er_2$$O_3$ 첨가가 유전특성에 미치는 영향에 대하여 환원성 분위기에서 연구하였다. $MnO_2-MgO$가 첨가된 내환원조성에서 첨가량이 조절된 $Er_2O_3$의 복합첨가로 유전율의 온도안정성이 향상되어 X7R 규격을 만족시켰으며 2,970 이상의 상온 유전상수와 1.0% 이하의 유전손실율이 관찰되었다. $Er_2O_3$가 3.0 mol% 이상으로 과량 첨가되었을 경우 유전체의 온도특성은 향상되었으나 상온 유전상수가 현저히 감소하였다. 다른 첨가조성(1.5 mol% $Er_2O_3$2.0 mol% MgO)이 고정될 때 TCC곡선은 $MnO_2$첨가량이 증가함에 따라 시계방향으로 회전하였으며, 온도안정성을 향상시켰다.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.794-801
• /
• 1995

LCD 모듈을 위한 실장 기술인 Chip on Glass 공정 기술을 개발함에 있어 구동 IC와 기판d의 Al 전극을 연결하기 위하여 기존의 기술과의 연관성 및 공정의 연속성, 제조단가등을 고려하여 Pb-Sn 범프를 사용하고자 하였으며 이를 위해 Al 금속 박막위에 니켈 무전해 도금하는 방법을 연구 하였다. Al 전극에 무전해 니켈 도금하기 위해서는 광레지스트 차폐막을 손상하지 않는 전처리 방법이 필요하기 때문에 전처리 방법으로서 알칼리 아연산염 처리법과 불화물을 이용한 아연산염 처리법을 선택하여 실시하였다. 이 가운데 산성불화암모늄(NH$_4$HF)을 1.5 g/$\ell$ 함유하고 황산아연(ZnSO$_4$)을 100 g/$\ell$ 함유한 산성 아연산염 용액에서는 광레지스트 차폐막이 손상되지 않았으며 처리시간을 적절히 조절함으로써 알루미늄 박막상에 선택적으로 니켈 무전해 도금을 할 수 있었다. 아연산염 응액중의 첨가제와 무전해 도금액 중의 억제제인 Thiourea는 도금층의 평활도를 높이는 역할을 하였다. 또한 아연산염 처리를 하기 전에 산세 처리를 함으로써 도금층의 균일성을 향상시킬 수 있었다.

• 한국토양비료학회지
• /
• 제51권1호
• /
• pp.35-49
• /
• 2018

This study was initiated to quantitatively evaluate the effects of five heavy metals (Cd, Cu, Zn, Pb, and Ni) on growth and P removal efficiencies of Pseudomonastaeanensis, known as the phosphorus accumulating microorganism. The heavy metals were added individually and with the binary mixture to the batch culturing system of Pseudomonastaeanensis. $IC_{50}$ and $EC_{50}$ were used to quantitatively evaluate their effects on the growth and phosphorus removal efficiency of Pseudomonas taeanensis in those treatments. Additionally, additive index value method was used to evaluate the interactive effects of heavy metals for Pseudomonas taeanensis in this study. As those heavy metals were singly added to Pseudomonastaeanensis, the greatest inhibitory effect on its growth and P removal efficiency was observed in Cd, whereas, the smallest effect was found in Ni. As the concentrations of all heavy metals added were gradually increased, its growth and P removal efficiency was correspondingly decreased. Specifically, $IC_{50}$ of Pseudomonas taeanensis for Cd, Cu, Zn, Pb, and Ni were $0.44mg\;L^{-1}$, $5.12mg\;L^{-1}$, $7.46mg\;L^{-1}$, $8.37mg\;L^{-1}$ and $14.56mg\;L^{-1}$, respectively. The P removal efficiency of Pseudomonas taeanensis was 81.1%. $EC_{50}$ values of Pseudomonas taeanensis for Cd, Cu, Zn, Pb, and Ni were $0.44mg\;L^{-1}$, $4.08mg\;L^{-1}$, $7.17mg\;L^{-1}$, $8.90mg\;L^{-1}$ and $11.26mg\;L^{-1}$, respectively. In the binary treatments of heavy metals, the lowest $IC_{50}$ and $EC_{50}$ were found in the Cd + Cu treatment, whereas, the highest $IC_{50}$ and $EC_{50}$ were found in the Zn + Pb and Pb + Ni treatments, respectively. Most of the interactive effects for the binary mixture treatments of heavy metals were antagonistic. Based on the results obtained from this study, it appears that they could provide the basic information about the toxic effects of the respective individual and binary treatments of heavy metals on the growth and P removal efficiency of other phosphorus accumulating organisms.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권1호
• /
• pp.127-131
• /
• 2020

Objective: This study was conducted to determine catalytic properties of wheat phytase with exopolyphosphatase activity toward medium-chain and long-chain inorganic polyphosphate (polyP) substrates for comparative purpose. Methods: Exopolyphosphatase assay of wheat phytase toward polyP75 (medium-chain polyP with average 75 phosphate residues) and polyP1150 (long-chain polyP with average 1150 phosphate residues) was performed at pH 5.2 and pH 7.5. Its activity toward these substrates was investigated in the presence of Mg²⁺, Ni²⁺, Co²⁺, Mn²⁺, or ethylenediaminetetraacetic acid (EDTA). Michaelis constant (K_m) and maximum reaction velocity (V_max) were determined from Lineweaver-Burk plot with polyP75 or polyP1150. Monophosphate esterase activity toward p-nitrophenyl phosphate (pNPP) was assayed in the presence of polyP75 or polyP1150. Results: Wheat phytase dephosphorylated polyP75 and polyP1150 at pH 7.5 more effectively than that at pH 5.2. Its exopolyphosphatase activity toward polyP75 at pH 5.2 was 1.4-fold higher than that toward polyP1150 whereas its activity toward polyP75 at pH 7.5 was 1.4-fold lower than that toward polyP1150. Regarding enzyme kinetics, K_m for polyP75 was 1.4-fold lower than that for polyP1150 while V_max for polyP1150 was 2-fold higher than that for polyP75. The presence of Mg²⁺, Ni²⁺, Co²⁺, Mn²⁺, or EDTA (1 or 5 mM) exhibited no inhibitory effect on its activity toward polyP75. Its activity toward polyP1150 was inhibited by 1 mM of Ni²⁺ or Co²⁺ and 5 mM of Ni²⁺, Co²⁺, or Mg²⁺. Ni²⁺ inhibited its activity toward polyP1150 the most strongly among tested additives. Both polyP75 and polyP1150 inhibited the monophosphate esterase activity of wheat phytase toward pNPP in a dose-dependent manner. Conclusion: Wheat phytase with an unexpected exopolyphosphatase activity has potential as a therapeutic tool and a next-generational feed additive for controlling long-chain polyP-induced inappropriate inflammation from Campylobacter jejuni and Salmonella typhimurium infection in public health and animal husbandry.

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.97-105
• /
• 2012

The effects of pH, types of applied current, agitation method and time, additive on the amount of co-deposited $TiO_2$ particles in the matrix were investigated. The deposition rates increased with increasing pH values, while the volume fraction of $TiO_2$ particles and the size of agglomerated $TiO_2$ particles in the composite decreased. The volume fraction of $TiO_2$ particles in the composite decreased when pulsed current of 50% duty cycle was used. And the size of agglomerated $TiO_2$ particles in the nickel matrix of pulsed current was smaller than that of DC current specimen. The volume fraction of $TiO_2$ particles in the matrix decreased with longer time by air agitation, but in case of using magnetic bar, volume fraction in the same range of time was relatively constant. The volume fraction of the electrodeposited Ni-$TiO_2$ composite in the solution containing 0.01 M Dimethylamine borane (DMAB) increased slightly with increasing agitation time regardless of agitation methods. Thermal stability of the electrodeposited Ni-$TiO_2$ composite increased with lower pH at the temperature range of $200{\sim}800^{\circ}C$, and the results showed that the amount of co-deposited $TiO_2$ relies more on the deposition rate than zetapotential of $TiO_2$ particles.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.756-760
• /
• 2007

Flame retardant(FR) properties were investigated with tricredyl phosphate(TCP) and tris(pentafluorophenyl)phosphine(TFPP) as additives for lithium-ion batteries. Thermal stability was improved with additives in $Li/LiNi\frac{1}{3}Mn\frac{1}{3}Co\frac{1}{3}O_2$ cells comparing to non-additive electrolytes. Oxygen evolution reaction of the cathode material was delayed to up $55^{\circ}C$, from $275^{\circ}C\;to\;330^{\circ}C$. Electrolytes with the 1 wt.% additives provided good FR properties while the resonable battery performance is maintained.

• 센서학회지
• /
• 제20권5호
• /
• pp.294-299
• /
• 2011

$SnO_2$ nanoparticles were synthesized by a hydrothermal method and gas sensors were fabricated using nanoparticles to detect dimethyl methylphosphonate(DMMP) gas. The prepared $SnO_2$ nanoparticles exhibited a high response(72 at $500^{\circ}C$) to 5 ppm DMMP gas compared to commercial $SnO_2$ nanopowders, but their recovery was relatively poor. Various metals(Ni, Sb, Nb) were added to the $SnO_2$ nanoparticles to improve their recovery properties. The focus of this study was to investigate the effects of metal oxide additives on DMMP sensing behavior in $SnO_2$ nanoparticles.