• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.362-381
• /
• 2019

The purpose of this study is to examine how two factors among various affecting factors of technological innovation, i.e. sectoral system of innovation and R&D support service, were actually applied in the case of NUC Electronics. This company has achieved high level of innovation performance through change of injection port and improvement of extracting rate. This was possible because each component of sectoral system of innovation system was matched with the innovation activity. The improvement of the performance in NUC Electronics was attributable to its own innovation efforts and R&D support service of government research institute. In the process of technological innovation, the company could receive high-level services in areas such as product design and virtual experiments that companies can not solve themselves. It can be said that the role of government and public institutions to support the shortage of SMEs was important. In terms of each component of sectoral system of innovation, we found that there were many opportunities of new technology; sustainability was low; imitation was easy; appropriability was low but it has dualily; accumulation of technology was relatively high, availability of external knowledge was high. At the same time, both of the company and the network played an important role, and market conditions were very favorable. In terms of R&D support services, it is a direct effect that a great deal of time and cost savings have been achieved through virtual experiments on the material and shape of the screw. As an indirect effect, the core competence of the company has been greatly strengthened by utilizing the momentum of technology development through external support, hence the company could establish the structure of virtuous circle of innovation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.252-258
• /
• 2018

A larger energy consumption and concentration of population induced green house gas glowing and heat island effect in the urban space. Roof green system was a effect method to reduce green house gas and heat concentration in the city. Therefore, construction of this system was increasing. Most of lightweight soil used in roof green system was perlite, but this caused dust and skin disease. So it needed to develop another new lightweight soli for roof green system. Meanwhile, a thermoelectric power plant generated bottom ash as a by-product. According to previous research, bottom ash could be used for artificial lightweight soil with 60 wt% of mixing rate. But this study was proceed to develop a artificial lightweight soil using bottom ash with higher mixing rate by 65 wt% and different organic ingredients. First, physical and chemical properties of bottom ash was investigated. Then test according to landscaping design standard was proceeded for various artificial lightweight soil mix types using bottom ash, bark, compost and coco peat. As a result, the artificial lightweight soil with 65% of bottom ash, 30% of bark and 5% of compost was suitable for low and middle range of soil standard.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.16-22
• /
• 2019

Off-line programming and robot calibration through simulation are essential when setting up a robot in a robot automation production line. In this study, we developed a new robot calibration method to match the CAD data of the production line with the measurement data on the site using 3D scanner. The proposed method calibrates the robot using 3D point cloud data through Iterative Closest Point algorithm. Registration is performed in three steps. First, vertices connected by three planes are extracted from CAD data as feature points for registration. Three planes are reconstructed from the scan point data located around the extracted feature points to generate corresponding feature points. Finally, the transformation matrix is calculated by minimizing the distance between the feature points extracted through the ICP algorithm. As a result of applying the software to the automobile welding robot installation, the proposed method can calibrate the required accuracy to within 1.5mm and effectively shorten the set-up time, which took 5 hours per robot unit, to within 40 minutes. By using the developed system, it is possible to shorten the OLP working time of the car body assembly line, shorten the precision teaching time of the robot, improve the quality of the produced product and minimize the defect rate.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.155-162
• /
• 2018

This study attempts to analyze the consumers' preference on Korean Red Ginseng Tonic, which is an essential product to revitalize Korean ginseng industry, using choice experiment method. The attributes used in the choice experiment were the ginseng age, good agricultural products(GAP), sugar, and price. A total of 1,796 experiments were collected and the value of each preferred attributes was estimated using a multinomial logistic model. The result shows that the products made from six-year-old and GAP(Good Agriculture Practice) approved Korean ginseng with less sugar were preferred. These estimated monetary values of marginal willingness to pay were about 94,000 KRW, 89,000 KRW, 5,000 KRW, respectively. Thus, the efforts to introduce and advertize GAP approved ginseng while developing new products with preferred attributes by general publics are necessary in the short run. In addition, we may need to consider developing the way to promote products using 4- and 5-year-old ginsengs, which are relatively underestimated in their health effectiveness but highly productive for farmers in the long run.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.267-274
• /
• 2018

Though the wet bottom ash has been used as a type of lightweight aggregate, dry bottom ash, new type bottom ash from coal combustion power plant, has scarcely researched. It is excellent lightweight aggregate in the view point of construction material. This study is performed to check the applicability of dry bottom ash as a fine aggregate in lightweight aggregate concrete, by analyzing various properties of fresh and hardened concrete. We get results that the slump of concrete is within the target range at less than 75% replacement rate of dry bottom ash, the air content is not affected by the replacement rate of dry bottom ash, the bleeding capacity is less than $0.025cm^3/cm^2$ at 75% under of the replacement rate of dry bottom ash, and the compressive strength of concrete show 90% or more comparing the base mix while initial strength development is a little low. Oven dry unit weight of concrete is reduced by 8.9% when replaced 100% dry bottom ash, and dry shrinkage tends to decrease depending on increase of replacement rate of dry bottom ash. Modulus of elasticity of concrete shows no decease at 50% over of the replacement rate of dry bottom ash, while modulus of elasticity of concrete decreases when the replacement rate increases further. The dry bottom ash, when used as a fine aggregate in lightweight concrete, can be used effectively without any deterioration in quality.

• Membrane Journal
• /
• v.29 no.3
• /
• pp.173-182
• /
• 2019

Much research has been made for finding new and eco-friendly alternative sources of energy to solve the problems related with the pollution caused by emissions of greenhouse gases such as carbon dioxide as the use of fossil fuels increases worldwide. Among them, fuel cells draws particular interests as an eco-friendly energy generator because only water is obtained as a by-product. Anion exchange membrane-based alkaline fuel cell (AEMFC) that uses anion exchange membrane as an electrolyte is of increased interest recently because of its advantages in using low-cost metal catalyst unlike the PEMFC (potton exchange membrane fuel cell) due to the high-catalyst activity in alkaline conditions. The main properties required as an anion exchange membrane are high hydroxide conductivity and chemical stability at high pH. Recently we reported a chemically crosslinked poly(2-dimethyl-1,4-phenylene oxide) (PPO) by reacting PPO with N,N,N',N'-tetramethyl-1,6-hexanediamine as novel anion exchange membranes. In the current work, we further developed the same crosslinked polymer but having enhanced physicochemical properties, including higher conductivity, increased mechanical and dimensional stabilities by using the PPO with a higher molecular weight and also by increasing the crosslinking density. The obtained polymer membrane also showed a good cell performance.

• The Journal of Society for e-Business Studies
• /
• v.24 no.2
• /
• pp.71-89
• /
• 2019

In order to come up with satisfying product and improvement, firms use traditional marketing research methods to obtain consumers' opinions and further try to reflect them. Recently, gathering data from consumer communication platforms like internet and SNS has become popular methods. Meanwhile, with the development of information technology, mobile companies are launching new digital products for children to protect them from harmful content and provide them with necessary functions and information. Among these digital products, Kids Phone, which is a wearable device with safe functions that enable parents to learn childern's location. Kids phone is relatively cheaper and simpler than smartphone but it is noted that there are several problems such as some useless functions and frequent breakdowns. This study analyzes the reviews of Kids phones from domestic mobile companies, identifies the characteristics, strengths and weaknesses of the products, proposes improvement methods strategies for devices and services through SNS consumer analysis. In order to do that customer review data from online shopping malls was gathered and was further analyzed through text mining methods such as TF/IDF, Sentiment Analysis, and network analysis. Customer review data was gathered through crawling Online shopping Mall and Naver Blog/$Caf\acute{e}$. Data analysis and visualization was done using 'R', 'Textom', and 'Python'. Such analysis allowed us to figure out main issues and recent trends regarding kids phones and to suggest possible service improvement strategies based on sentiment analysis.

• Journal of the Economic Geographical Society of Korea
• /
• v.24 no.3
• /
• pp.313-329
• /
• 2021

This study analyzed the characteristics of the management crisis, the level of resilience, and the alternatives based on the companies' self-evaluation of the game industry in Daegu. The Daegu game industry, which started spontaneously in the late 1990s, grew rapidly until the late 2000s with the support of the government and supporting organizations. However, from the mid-2010s, it has entered a period of recession due to the number of companies that failed to respond to the saturation of the mobile game market and fierce competition at home and abroad. In response, some game companies turned the crisis into an opportunity to strengthen their competitiveness by pursuing challenging strategies for product differentiation and pioneering new markets. On the other hand, companies that were passive in responding to the crisis have not get out of the management crisis. In addition, in terms of the resilience level of game companies in Daegu, the level of immediate response to shock(rapidity) and replacement of the damaged part(redundancy) was low, but the level of mobilizing sufficient resources internally(resourcefulness) was high. However, as the Daegu game industry is facing more complex multi-spatial-scale environmental changes than in the past, its resilience should be strengthened through strategies that can compensate for weaknesses in terms of the game industry ecosystem beyond individual company-level efforts.

• Food Science and Industry
• /
• v.50 no.2
• /
• pp.2-11
• /
• 2017

Packaging is the last defensive barrier that protects food products from insect infestation during storage. However, though packaging films are hermetically sealed, insects can still be attracted by strong olfactory cues and penetrate through packaging materials, resulting in contamination. Insect contamination may cause consumers to be repulsed by contaminated food products. Especially, it is well known that stored-product insects cause critical problems in the cereal industry by inducing quantitative and qualitative damages to the grain products. The contaminations are caused by insects' metabolic byproducts and body parts, consequentially caused customer repulsion. Therefore, it is necessary to repel and control insects. However, management systems for storage insects in food industry have been inadequate for many years. Synthetic pesticides has been widely used, but pesticides may accumulate in foods, causing acute and chronic symptoms in consumers. For this reason, there is a growing need for the development of natural insecticides that can replace synthetic pesticides. Thus, various reports about anti-insect packaging materials and strategies to repel insects were introduced in this study. Furthermore, we suggested new strategies to develop an insect-repelling active packaging materials which could be applied in the food packaging industry.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.1-7
• /
• 2021

With increasing interest in the effectiveness and safety of sunscreen worldwide, research on the development of new inorganic sunscreen is also gaining momentum. In the present study, non-nano sized needle type zinc oxide, which can meet the regulation of nano-material as a recent problem, has been synthesized and surface-modified with cetyl alcohol to obtain needle type zinc oxide powder. Here, we also investigated their physical properties and evaluated their potential application as sunscreens. As a result of the experiment, the sunscreen with needle type zinc oxide powder, which was non-nano, showed similar UV-protection properties and transparency compare to that of 40nm size zinc oxide. It was further confirmed that the UV blocking effect was significantly increased when the needle type zinc oxide dispersion was applied to the sunscreen. Therefore, although the needle type zinc oxide is non-nano (200 nm) material, it has the potential to be applied to the product as an excellent transparency (improvement of whiteness), UV protection efficacy and smooth texture.