• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.273-280
• /
• 2010

This study aims to research into a plan for the spatial design on the major facilities in new-town region in Mongolia by using the spatial analytical technique in GIS. In case of Mongolian region, the demand for new-town development is rapidly increasing around Ulaanbaatar, where is the capital. On the other hand, the adequately relevant ground or the spatial-design technique is failing to be applied. This study extracted the region available for developing new down by using spatial analytical technique in GIS, and researched into the spatial-design plan for housing complex, filtration plant, sewage disposal plant, power plant, general park, crematory. The housing complex in the targeted region could be known to be adequate to be positioned around watercourse and road. It could be known to be adequate for filtration plant, which is the source of drinking water, to be located in the upper-stream region of a river, which is secured good quality of water, and for sewage disposal plant to be located in the lower-stream region available for minimizing occurrence of contamination. It is judged to be required for a proposed site of power plant to be located in the upper-stream region, for the park unit, which is space of the living culture, to be repaired and expanded the existing facilities, and for traffic network to be expanded through predicting demand along with new-town development. It is judged to be probably needed to be reflected even the flexible aspect for changing design through surveying the feasibility and economic efficiency on the future spatial design.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.58-62
• /
• 2007

Digital communication is important for reliability and mobilization of the multi-channel communication systems. Transmitting and receiving data for the mobilization should be possible in anywhere and in anytime. And this system must be designed light weight small size and low power. One are essential technology for implementing the mobile wireless communication system on the age of ubiquotos. Requirements in constructing such communication field are followings. At first data transmitting and receiving should be carried out by a simple command. Second, the device should be designed as hand-hold type and low power consumption. Third, data communication should be reliable. As one of examples, car to car system which is popular in the market is introduced here, All traffic information in highway is transmitted from one car to another by using this system which can prevent possible traffic accident. This paper shows the design of a digital data communication system with CC1020 chip. This CC1020 makes easy frequency selection and easy switch from the transmit mode to the receive mode by simple setting of a memory register in the chip. The transmit power of this system is designed 10dBm and its communication range is about 100m. The power supplied this system is 3V considered as low power. The sleep mode can be easily entered during transmit mode or receive mode. We shows the program algorithm of CC1020 and interface circuit between MCU and CC1020. We shows the Photo of the CC1020 Module and Atmega128 Module.. We analysed the receiver rate with this system.

• Journal of KIISE:Information Networking
• /
• v.33 no.4
• /
• pp.289-298
• /
• 2006

Algorithms for application-level multicast often use trees to deliver data from the source to the multiple receivers. With the tree structure, the throughput experienced by the descendant nodes will be determined by the performance of the slowest ancestor node. Furthermore, the failure of an ancestor node results in the suspension of the session of all the descendant nodes. This paper focuses on the transmission of data using multiple virtual forwarders, and suggests a scheme to overcome the drawbacks of the plain tree-based application layer multicast schemes. The proposed scheme elects multiple forwarders other than the parent node of the delivery tree. A receiver receives data from the multiple forwarders as well as the parent node and it can increase the amount of receiving data per time unit. The multiple forwarder helps a receiver to reduce the impact of the failure of an ancestor node. The proposed scheme suggests the forwarder selection algorithm to avoid the receipt of duplicate packets. We implemented the proposed scheme using MACEDON which provides a development environment for application layer multicast. We compared the proposed scheme with Bullet by applying the implementation in PlanetLab which is a global overlay network. The evaluation results show that the proposed scheme enhanced the throughput by 20 % and reduced the control overhead over 90 % compared with Bullet.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.236-242
• /
• 2015

We present two data-driven modeling methods, partial least square (PLS) and artificial neural network (ANN), to predict the major operating and performance variables of a polymer electrolyte membrane (PEM) fuel cell stack. PLS and ANN models were constructed using the experimental data obtained from the testing of a 30 kW-class PEM fuel cell stack, and then were compared with each other in terms of their prediction and computational performances. To reduce the complexity of the models, we combined a variables importance on PLS projection (VIP) as a variable selection method into the modeling procedure in which the predictor variables are selected from a set of input operation variables. The modeling results showed that the ANN models outperformed the PLS models in predicting the average cell voltage and cathode outlet temperature of the fuel cell stack. However, the PLS models also offered satisfactory prediction performances although they can only capture linear correlations between the predictor and output variables. Depending on the degree of modeling accuracy and speed, both ANN and PLS models can be employed for performance predictions, offline and online optimizations, controls, and fault diagnoses in the field of PEM fuel cell designs and operations.

• Journal of the Economic Geographical Society of Korea
• /
• v.23 no.1
• /
• pp.56-70
• /
• 2020

This study identifies the impact of social network service (SNS) on the spatial characteristics of retail stores locations in the hyper-connected society, which have been closely related to the everyday lives of urban residents. In particular, we focus on the changes in the spatial distribution of restaurants since the information retrieval process was added to the decision-making process of a consumer's restaurant selection. Empirically, we analyze restaurants in Seoul, Korea since the smart-phone was introduced. By applying the kernel density estimation and Moran's I index, we examine the changes in the spatial distribution pattern of restaurants during the last ten years for running, newly-open and closed restaurants as well as SNS popular ones. Finally, we develop a spatial regression model to identify geographic features affecting their locations. As the results, we identified geographical variables and online factors that influence the location of restaurants. The results of this study could provide important groundwork for food and beverage location planning and policy formulation.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.165-175
• /
• 2007

The mobile agent executes a given task by which the agent code moves to the server directly. Therefore, node migration method becomes an important factor which impact on the whole performance of distributed system. In this paper, we propose an adaptive migration path technique of mobile agent using the metadata of naming agent. In this proposed technique, node selection for migration depends on the content of referenced metadata, and the reliability of migrated information is determined by the metadata updating method and cooperative operations of individual agents in multi-agents system. For these, we design the metadata using by the number of hit documents, hit ratio, node processing time and network delay time, and describe the methods for creating, using and updating metadata for which determine the adaptive node migration path of mobile agent according to the cooperation of individual agents and number of hit documents using by designed metadata. And results of evaluated performance for proposed adaptive migration path technique through the proper experiment and analysis gain rate of high effective information earning, because of high hit ratio(72%) about of fathered documents by case of applying metadata move to the 13 nodes. But, in case of non-applying metadata is hit ratio(46%) of gathered documents and rate of effective information earning about of 26 nodes is 36.8%.

• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.159-178
• /
• 2012

Recently, Global network expansion strategy of GTOs(Global Terminal Operator) coupled with each country's port policy, plays huge role for the evolution of modern container port. The Chinese ports can be regarded as the major markets to the GTOs. However, there are scant of researches for finding the key success factors of GTOs' strategies when they consider to invest in overseas. In this respect, the aims of this study were to draw out the evaluation variables for successful investment strategies of GTOs, and to calculate the selected target ports. The 14 variables are selected including the variable named 'development potentiality of a port' through literature reviews. Using the Factor Analysis (FA) based on selected variables, four principal factors were extracted such as 'ability for port operating and cargo generating', 'the trade route and volume', 'the calling potentiality for large vessels' and 'the possibility of utilization of existing infrastructure'. In addition, the weights of factors and variables are evaluated through Fuzzy AHP method. As a result, 'ability for port operating and cargo generating' is chosen as the most important factor among principal factors as scored 0.343, and 'the development potentiality of a port' (0.107) is represented as the most important variable among 14 detailed variables. In overall, from the Global Terminal Operator's point of view, Shanghai is ranked as most suitable port for operating new terminal among the top 5 Chinese ports.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.453-460
• /
• 2005

Since late 1970s, water quality monitoring had been performed in Korea by various agencies according to their own needs and objectives. Lacking of consistency in principles, such diverse operation has been producing difficulties in management of information on water quality parameters. These difficulties resulted from the fact that the expansion of monitoring networks had been based not on systematic methodology with considerations on scientifically established planning objectives but on personal experiences and subjective judgments in locating monitoring stations. This study aimed, therefore, to develop a selection methodology for locating monitoring stations to provide various informations on water quality to satisfy various monitoring objectives such as understanding short and long term trends of water quality, monitoring violations to water quality standards, identifying external causes and sources affecting water quality changes, supporting utilization of water resources, examining short-term variations in water quality through a concentrated investigation, estimating pollution loads from each unit watershed, supporting water quality modeling, and establishing informative systems for water resources management. Also, we applied the proposed methodology and presented an improved expansion plan for water quality monitoring networks in the Han River.

• IMMUNE NETWORK
• /
• v.7 no.3
• /
• pp.149-157
• /
• 2007

Background: The microsatellites within human leukocyte antigen (HLA) region show considerable polymorphism and strong linkage disequilibrium (LD) with HLA alleles. These microsatellites have been used for genetic analysis including disease mapping to understand susceptibility to autoimmune and infectious diseases. Also, use of microsatellites has recently been proposed as an approach for identifying non-HLA markers within the HLA region that could function as transplantation determinants and for the selection of potential donors for transplantation. Methods: To analyse the frequency of five microsatellites in the Korean population, genotyping for polymorphisms at five microsatellites markers (BAT2, MIB, DQCAR, D6S105 and TNFd) within HLA region was performed on 143 healthy Korean controls. Results: The most frequent genotype shown in healthy Korean controls were BAT2 8 (153 bp, 42.7%), MIB 1 (326 bp, 40.6%), DQCAR 3 (188 bp, 38.5%), D6S105 7 (126 bp, 58.0%) and TNFd 3 (128 bp, 58.0%). And common two-loci haplotypes were found as MIB 1-HLA-B*62 (HF: 10.6%), MIB 6-HLA-B*44 (HF: 7.8%), DQCAR 3-HLA-DRB1*13 (HF: 8.5%), TNFd 5-HLA-B*62 (HF: 7.8%) and D6S105 7-HLA-A*02 (HF: 16.2%). Conclusion: These data might provide useful information on the microsatellites markers with HLA region in Korean population and be helpful in further defining the clinical impact of these microsatellites.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.35-40
• /
• 2011

In this paper, we compare and analyze data aggregation methods based on event area in wireless sensor networks. Data aggregation methods consist of two methods: the direct transmission method and the aggregation node method. The direct aggregation method has some problems that are data redundancy and increasing network traffic as all nodes transmit own data to neighbor nodes regardless of same data. On the other hand the aggregation node method which aggregate neighbor's data can prevent the data redundancy and reduce the data. This method is based on location of nodes. This means that the aggregation node can be selected the nearest node from a sink or the centered node of event area. So, we describe the benefits of data aggregation methods that make up for the weak points of direct data dissemination of sensor nodes. We measure energy consumption of the existing ways on data aggregation selection by increasing event area. To achieve this, we calculated the distance between an event node and the aggregation node and the distance between the aggregation node and a sink node. And we defined the equations for distance. Using these equations with energy model for sensor networks, we could find the energy consumption of each method.