• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1135-1144
• /
• 2010

The high tech marine transportation infrastructure is an innovative transportation infrastructure that may be able to secure a safe transportation environment as well as efficient operation by connecting up-to-date skills including a broad range of wire and wireless communication-based information, control and electronics technologies. When integrated into the marine transportation infrastructure by the standard requirements, these standard technologies help monitoring and managing navigational aids. This paper defined a concept of middleware in the marine traffic management systems which gives characteristics of system independency, scalability, extensibility, and researches a functionality of the middleware and a software block of the middleware.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.259-261
• /
• 2015

In order to provide a safe and secure electronic navigational chart information services, AIS information, information on aids to navigation, maritime safety information, weather information, information on a variety of birds such as the data fused S-100 standards-based e-Navigation system should be established. S-101 ENC implement Rendering Engine analyzes the Drawing Instruction set generated by Portrayal Engine of the S-100 General Portrayal Model for is a job to be followed to establish the e-Navigation System to implement the S-101 ENC Should be. In this paper, we analyze the Drawing Instruction of the existing S-57 ENC and S-101 ENC is the basis for the implementation of the S-101 ENC.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.187-191
• /
• 2003

This paper describes a method for making 3D marine environmental database of ship handling simulator by using electronic nautical chart data. While developing simulator system, we had to digitize the nautical paper chart in order to obtain the basic data including coastline, navigational aids and so on. In our method, we can get easily exact data necessary to make the database of visual presentation system from electronic nautical chart data that is coded according to S-57 transfer standard of IHO.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.225-233
• /
• 1999

Harbor design and construction plan in Korea becomes the most hot issue both in the Maritime Affairs and Fisheries Office and in the related port industries. Production of the plane and cross section maps together with the profile map for harbor project is done firstly and is important in all procedure because it is the most basic datum in counting the constructional expense for determination of the area and capacity. As the expense assigned on surveying part among the total expenses of harbor planning and construction in Korea is very small, it is difficult to make exact maps. Moveover, because the method used to make such maps is mostly traditional surveying such as plane table surveying , offset surveying, stadia surveying and level surveying, etc, it is difficult to get precise three dimensional maps. Therefore, for making more precise map in the harbor project, we have to use the newest surveying equipment. This study discusses the method of old surveying and recent surveying used for the three dimensional map of the site for lighthouse which gives navigational aids for the in-and out-bound ships. The authors are proposing a method for more precise three dimensional positioning in this study.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.192-193
• /
• 2023

The International Association of Navigational Aids to Navigation (IALA) utilizes the S-200 standard model and test data for product specification development and validation related to generating datasets compliant with the S-201 data format. Currently, they are focusing on improving the S-200 testbed DB performance and extending the IALA Questionnaire survey functionality. In this study, we investigate the design and implementation of features required to manage additional questionnaires in the S-200 testbed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.78-85
• /
• 2014

The Mu-communication board supported by hybrid communication is designed with Cortex M3, which is a low power energy consumption 32-bit microcontroller. The Cortex M3 microcontroller has UART(Universal asynchronous receiver/transmitter) ports which can set appropriately using the command line interpreter (CLI) program with each port. URAT ports are used for hybrid communication modems, GPS modules, etc. When the socket type was compared with the short message service type, the socket type was proven to be better. By improving the receiving performance in the control and management system of the AtoN, data loss was minimized. During the testing of the socket and SMS, data was collected from each buoy for 12 hours every 1 minute and the receiving rate of the data was found to be more than 98.58 % and 99.42 % respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.842-848
• /
• 2011

A fabricated hybrid control board using multi-communication is designed with a low power 8-bit microcontroller, ATxmega128A1. The microcontroller consists of 8 UART (Universal asynchronous receiver/transmitter) ports, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. The 8 URAT ports are used for a multi-communication modem, a GPS module, etc. The EEPROM is used for saving a configuration for running programs, and the flash memory of 128 kbytes is used for storing a F/W (Firm Ware), and the 8 kbytes SRAM is used for stack and for storing memory of global variables while running programs. If we use the multi-communication of CDMA, TRS and RF to remotely control Aid to Navigation, it is able to remove the communication shadow area. Even though there is a shadow area for an individual communication method, we can select an optimal communication method. The compatibility of data has been enhanced as using of same data frame per communication device. For the test, 8640 of data have been collected from each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 85 %.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.1-8
• /
• 2005

In the present maritime traffic conditions of Mokpo harbor, there exist many hazardous factors which may lead to huge accidents including marine oil pollution We analyze marine traffic environments including traffic congestion, natural conditions, maritime traffic accidents in the last 10 years, the fishery status, operation of traffic routes and management of navigational aids and regulations relating ships' routeing both in and out of the country. Consequently, this work is to propose improved marine traffic system in future.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.379-385
• /
• 2012

This paper developes the navigation visual aid supporting a watch officer's situation awareness and analyzes its performance test result. Developing the equipment made from composite video sensor which transfer video signal, ranger laser measurement model which search out distance, Pan/ Tilt, center control device. The developed equipment with Pan/Tilt was made from high performance video sensor and ranger laser measurement. To make a real ship test, we carried on setting the developed equipment on ship, observed a danger factor and analyzed a image, and from that we can evaluate marine environment awareness. Through this result, the developed equipment can show effective ability of the awareness of the clearer check and resolution situation when compare with the binocular.

• Journal of Korean Port Research
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1996

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this, Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows: 1. Among those vessels called at Mokpo Port in 1994, 556 ships(2,736,669 G/T) are oceangoing while 8155 ships(2,587,217 G/T) are domestic. The average size of oceangoing vessels is 4,922,1 G/T, and the domestic is 317,8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165%. 2. The capacity of approaching channel is enough to handle the total traffic volume of 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 - No.5 is 4.5% and No.6 is 30% of 1993's. 5. The utilization rate of LLC(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively.