• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.55-57
• /
• 2015

The tracking system plays a key role in accurate estimation and prediction of maneuvering vessel's position and velocity in a bid to enhance safety by taking avoiding action against collision. Therefore, in order to achieve this, many ocean- going vessels are equipped with radar and the ARPA system. However, the accuracy of prediction highly depends on the choice of the gain parameters, ${\alpha}$, ${\beta}$ and ${\gamma}$ employed in the tracking filter. P revious research of this paper was based on theoretically developing an algorithm for a tracking module. This research paper is hence a continuation by the authors to determine the optimal values of the gain parameters used in the tracking module. A tracking algorithm is developed using the ${\alpha}-{\beta}-{\gamma}$ filter to carry out prediction and smoothing of the positions and velocities. Numerical simulations are then performed to evaluate the optimal values of the smoothing parameters that will improve the performance of the tracking module and reduce measurement noise. The twice distance root mean square (2drms) is then calculated to determine error variation.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.268-277
• /
• 2014

It is very important to correlate flight plan for safe and prompt ATC(air traffic control) operation. In this paper, we design CWP(controller working position) MRT(multi radar tracking) processing module to achieve improvement of overall ATC automation system's performance by minimizing network traffic overload when correlating MRT with flight plan. This implemented module can guarantee efficiency and safety of ATC automation system by applying distributed correlated manner, and reduce network usage by using encoded flight plan correlated MRT data format. We found that this module has 8.54~12.11% lower network usage and 8.37~11.27% higher network traffic fairness than the module using standalone manner.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.229-234
• /
• 2021

In this paper, a study was conducted on the power amplifier control required to design an eLoran transmitter system using a low-height antenna. The eLoran transmitter developed during the eLoran technology development project conducted in Korea used a small 35 m antenna due to the difficulty of securing a site for antenna installation. This antenna height is very low compared to the height of 750 m which is required for eLoran 100 kHz signal transmission without any radiation loss. In the case of using such a small antenna, not only the radiation efficiency of the transmission is lowered, but also the power module control must be performed more precisely in order to transmit the eLoran standard signal. The equivalent RLC circuit of the transmitter system was implemented and transient analysis was conducted to derive the input required voltage for satisfying the output requirement. The voltage waveform was also generated by the RLC circuit analysis to generate the eLoran signal. Furthermore, we suggest power width modulation method to control eLoran power amplifier module more sophisticatedly.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.117-118
• /
• 2012

As the technical standard of hydrographic data was transferred from S-57 to S-101, a standard system was set up for producing the next generation ENCs but also various maritime safety information. ECDIS that display a S-57 ENC and include a navigation support function, should be developed considering new standard. S-10X data and e-Nav information can be used in this system. In this study, an implementation mechanism of S-100 standard was analyzed for design of navigation support system based on S-100. From the results, it was designed as loading module of S-10X data, display module of SENC, navigation supporting module. Also, this study considered a next generation ENC, a bathymetric grid data, an electronic nautical publication as an input information.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.669-679
• /
• 2003

Through AIS(Automatic Identification System), ITU-R suggested the navigational data communication between ships and between ships and shore stations for the better safety of navigation, and it requires two different the transmitting output power level depending on its operating mode. According to ITU's recommendation, these levels should reach within 20% of its final value in 1ms. In this paper, an adequate feedback control circuit for power amplifier module is designed and implemented.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.213-219
• /
• 2018

In this paper, we propose a design method and process for hardware and software of hybrid V2X communication module that supports both C-ITS communication protocol designed for vehicle environment and Legacy LTE communication technology. C-ITS is suitable for safety service applications due to its low latency characteristics, and Legacy LTE is a technology suitable for non-safety applications such as traffic information and infotainment due to high latency and high capacity. The hybrid V2X communication module supports multiple communication technologies of WAVE and LTE, in which WAVE supports multiple channels, so that it is designed to transmit road information such as LDM and positioning correction information to an autonomous vehicle in real time. The main design results presented in this paper will be applied to the implementation of future hybrid V2X communication terminals for vehicles.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.86-93
• /
• 2015

Recently, the development of Maritime Service Portfolios (MSPs) for the safe navigation of ship has been discussed internationally. For the successful service of the MSPs, first of all, studies for the standardization about the structure and data structure of MSPs should be preceded. Also, it is necessary to evaluate and assess whether the services are effective for safe navigation, and provided data and portrayal methods are proper. However, because great dangers will be accompanied when untested MSPs about their effectiveness and safety are applied in real ship navigation, it is necessary that effectiveness and safety of the MSPs should be proven under various navigational conditions and environments by simulation. In this paper, we propose a 3D navigation simulation system using desktop PC environment, which is proper for evaluating the effectiveness of MSPs. The system consists of three modules which are simulation scenario editor, 3D visualization of navigational environment and 2D navigational equipment. The scenario editor module provides an environment setting for simulation, such as properties, routes and positions of vessels and aids to navigations. It also provides functions to create a scenario for the simulation to operate. Additionally, the 3D visualization module provides 3D navigational environment which shows interplay between geographical and navigational environment based on the created scenario. The 2D navigational equipment module provides visualization functions of various navigational equipment, shows the interaction between ship's navigational equipment and ship's environment. The simulation scenario, in which various kinds of ships are routing in the port, is created by the developed simulation system, and experimented whether this developed system is appropriate to evaluate and assess the MSPs developed by the International Maritime Organization.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.199-207
• /
• 2015

In ports of Korea, the marine traffic flow is congested due to a large number of vessels coming in and going out. In order to improve the safety and efficiency of these vessels, South Korea is operating with a Vessel Traffic Service System, which is monitoring its waters for 24 hours. However despite these efforts of the VTS (Vessel Traffic Service) officers, collisions are occurring continuously, the risk situation is analyzed that occurs once in about 20 minutes, the risk may be greater. It investigated to reduce these accidents by providing a safety standard for collision danger in a timely manner. Thus, this study has developed a risk prediction module to predict risk in advance. This module can avoid collision risk to adjust the speed and course of ship using a risk evaluation model based on ship operator's risk perspective. Using this module, the ship operators and VTS officers can easily be identified risks in complex traffic situations, so they can take an appropriate action against danger in near future including course and speed change. To verify the effectiveness of this module, this paper predicted the risk of each encounter situation and confirmed to be capable of identifying a risk changes in specific course and speed changes at Busan coastal water.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.2
• /
• pp.13-24
• /
• 2008

A next generation video based car navigation is researched to supplement the drawbacks of existed 2D based navigation and to provide the various services for safety driving. The components of this navigation system could be a load object database, identification module for load lines, and crossroad identification module, etc. In this paper, we proposed the traffic lights and road sign recognition method which can be effectively exploited for crossroad recognition in video-based car navigation systems. The method uses object color information and other spatial features in the video image. The results show average 90% recognition rate from 30m to 60m distance for traffic lights and 97% at 40-90m distance for load sign. The algorithm also achieves 46msec/frame processing time which also indicates the appropriateness of the algorithm in real-time processing.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.712-719
• /
• 2013

This paper studies the security module for the reliable transmission of the meter reading and the control data between the remote terminals and the upper server-side in smart water grid. The proposed security module was implemented to make it attachable to the remote terminal without security function. In particular, unlike the smart grid of electric field, the low power is considered due to the use of battery power in the smart water grid, and the ARIA-GCM-128 symmetric key method is adopted taking into the account that the damp and constrictive environments by the installed meter location in the underground occur a communication obstacle on building of the large-scale network system. The encryption module of this paper was devised to ensure the safety between the reading data on the terminal and the control data from the upper server, and secure the stability of the remote meter reading system by taking protection against an arbitrary alteration or modification.