• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.373-374
• /
• 2022

The sea-communication fishing equipment installed on small vessels such as offshore fishing vessels is highly dependent on foreign products due to its high dependence on foreign products. From the perspective of domestication, the development of localization at the overseas level is underway, and we intend to demonstrate it by creating a dedicated testbed in order to secure track records. In this paper, we wanted to derive the testbed shape and design method through basic research for the design of the testbed.

• Journal of Advanced Navigation Technology
• /
• v.6 no.2
• /
• pp.138-150
• /
• 2002

This paper addresses the problem of combining adaptive polarization processing and space-time processing for further performance improvement of radar target detection in clutter and Jammer environments. Since the most straightforward cascade combinations have quite limited performance improvement potentials, we focus on the development of adaptive processing in the joint polarization-space-time domain. Unlike a direct extension of some existing space-time processing algorithms to the joint domain, the processing algorithm developed in this paper does not need a potentially costly polarization filter bank to cover the unknown target polarization parameter. The performance of the new algorithm is derived and evaluated in terms of the probability of detection and the probability of false alarm, and it is compared with other algorithms that do not utilize the polarization information or assume that the target polarization is known.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.403-410
• /
• 2015

ADS-B can provide high accurate position information and faster update rate than Radar system and it is a technique that can supplement or replace the Radar. Recently ADS-B has been applied to the actual aircraft operation because to increase air transportation traffic and required to high accurate surveillance. In this study, we surveyed analysis of position deviation distribution analysis and received actual ADS-B trajectory data for conformed precise surveillance on the near airport area using ADS-B message. For that, we received the precision instrument approach ADS-B trajectory data using instrument landing system, and can analyse about target deviation distribution on the final approach segment about precision instrument approach. The result of analysis is mean distance of target deviation -0.04 m and standard deviation 6.71 m on between ADS-B target and extended runway centerline. Also that is to conformed the ADS-B message trajectory available to provide relatively exact surveillance information.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.179-186
• /
• 2017

This paper is concerned with an interrogator capable of constructing a interrogation scenario for acquiring active airspace to the intruding aircraft into the surveillance area of the MLAT system. In the MLAT system, the interrogator is an important device used to carry out the interrogation towards the aircraft within the surveillance airspace in the appropriate surveillance scenario. Unlike a conventional SSR's interrogation methods that interrogate for airplanes flying within a certain range, the MLAT system requires a interrogation system that can actively interrogate from remote to near range, or according to operational scenarios, for aircraft intruding into the surveillance range. The interrogator implemented in this paper can be used for interrogating and monitoring aircraft within each surveillance airspace using whisper-shout algorithm according to varying output power based on the actual operation distance.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.13-22
• /
• 2000

The collisions at sea among marine casualties are not reduced as the tonnage and speed of ship's increase as well as the traffic quantity increase at sea, in spite of the improvement of nautical equipment, enforcement of crew's education and training as well as improvement of quality standard according to the implementation of ISM code. The measures to prevent the collisions at sea are simple, and are composed of six stage.: The first stage is that the officer on duty detect the target from his eye or radar information. The second stage is determining the type and kind of target-ship. The third stage is target tracking; calculation of target speed, course, CPA and TCPA from radar information or visual check. The fourth stage is determination of vessel in danger after calculation of third stage. The fifth stage is the judgement of situation if own ship is stand-on or give way vessel according to the 1972 COLREG. The last stage is to carry out proper action according to 1972 COLREG, under the circumstances. But by the case, the situations are so different under the different external conditions; for example, natural/navigational conditions, crew's human factors, ship's particular, rule or regulation, management system on board, the condition of watch keeping. Therefore the reasons and casualties are so complicated. This study aims to investigate the collision casualty at sea which needs to clarity all these causal factors of afore-mentioned, and to analyze the causes of problems so as to utilize them to establish the measures of preventing marine accidents. This study, described the concepts of causal factors into three groups; environmental factor, and company/on board management system and navigator's act. Also described how to investigate and analyzes the casual factors. Even though it was described in this paper how to detect the causal factors and reasons of collisions, and how to analyze the inter-relation of each causal factors, it is necessary to do further study how to analyze between the liability of concerned parties and the casual factors involved.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.337-343
• /
• 2013

To ensure the safety for vessels anchored in stormy weather, duty officer and VTS operator have to frequently check whether their anchors are dragging. To judge dragging of the anchored vessel, it is important for VTS operator to recognize the turning circle and its center of the anchored vessel. The judgement for the anchored vessel dragging can be made by using Radar and AIS. If it is available, CCTV or eye-sighting can be used to know the center of turing circle. However, the VTS system collects individual ship's dynamic information from AIS and ARPA radar and monitors of the anchored vessels, it is difficult for VTS operator not only to get the detailed status information of the vessels, but also to know the center of turning circle. In this study, we propose an efficient algorithm to estimate the center of turning circle of anchored vessel by using the ship's heading and position data, which were from AIS. To verify the effectiveness of the proposed algorithm, the experimental study was made for the anchored vessel under real environments.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.261-268
• /
• 2002

At recently, Oil spill accident of large size oiler that happen domestic and outside the country is occured to social impact us as well as economical damage in sea environment. Also, because spread extent of pollution accident is reaching harbor, bay and close water areas, as necessity that traffic control ships are sea place. VTS is changing to concept that control space is magnified gradually. Our country is operated to 14 harbors which is control center. But abroad is operating coastal VTS that do main waterway and coastals to authority dimension. Therefore, necessity that traffic density of ship manages high coastals and ship traffic of waterway to our country is risen. This paper is execute sea traffic survey at Mokop sea areas and sea casualty occurs. It proposal that coastal VTS center field of most suitable and position of radar site.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.108-115
• /
• 2015

Multilateration systems are used to provide the position of aircraft in flight or on airport runways. In the multilateration systems, the interrogator is an important transmitter that used to interrogate the airplanes with appropriately scenario in surveillance airspace. Whisper-Shout interrogation sequence, which is one of the key functions of the interrogator, can control airport traffic density when intruder airplanes are coming into the surveillance airspace. Therefore collision chance between airplanes could be reduced and also get highly accurate location of incoming airplane in multilateration systems. In this paper, we developed the interrogator that allows it to transmit Mode A/C and Mode S interrogations which is similar to existing secondary surveillance radar. With appropriately controlled Whisper-Shout sequence in the interrogator, the multilateration systems can avoid synchronous garbling and FRUIT phenomenons caused by receiving multiple responses from a number of airplanes.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.522-529
• /
• 2018

FOD refers to various metals and non-metallic foreign substances that pose a risk to aircraft. FODs occur in all areas and time zones, including runways, taxiways, and maintenance facilities, and pose a fatal hazard to aircraft safety during aircraft movements and take-off and landing. Rapid and effective detection and removal of FODs in the runway is required. As part of recent developments in aviation safety technologies, automatic detection of debris in runways in airports is under way. In this paper, we conducted an automated detection test using the EO/IR camera and radar at the Taean campus of Hansu University to confirm normal detection during the day and night.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2021

In this paper, the design method for a high-sensitivity compact resonator for chipless RFID tags is proposed. Proposed high-sensitivity compact resonator uses an interdigital-capacitor structure instead of a capacitor-shaped strip structure in a conventional ELC resonator. The length of the electrode plate of the IDC structure is longer than that of the conventional capacitor-shaped structure, resulting in a larger equivalent capacitance of the resonator. This can lower the resonant peak frequency of the RCS characteristic. Two resonators with the same length of the square loop and the width of the strip are fabricated on an RF-301 substrate with a thickness of 0.8 mm. The experiment results show that the resonant peak frequency and value of the bistatic RCS for the ELC resonator were 4.305 GHz and -30.39 dBsm, whereas those of the proposed IDC resonator were 3.295 GHz and -36.91 dBsm. Therefore, the size of the resonator is reduced by 23.5% based on the measured resonant peak frequency of the RCS characteristic.