• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.102-106
• /
• 2003

Crystallization behaviour of blends of different MFI isotactic polypropylenes (PP), and blends of PP with carbon nanofibre have been investigated by DSC and polarizing optical microscope. Both higher MFI PP component and the carbon nanofibre in the blend influence the nucleation activity of the melt during non-isothermal crystallization. In presence of carbon nanofibre, the sherulitic growth rate is highly disturbed. The calculation of nucleation activity indicates that carbon nanofibres act as active substrate for heterogeneous nucleation.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.59-64
• /
• 2004

The performance of fuel cell electrode depends on the characteristics of the catalyst support material. This paper deals with the use of CNF(carbon nanofibre) and CNT(carbon nanotube) as platinum catalyst support. The CNF and CNT were synthesized with catalyst treated by mechanochemical process and were prepared by chemical vapor deposition (CVD) method. The platinum supported on CNF and CNT for polymer electrolyte membrane fuel cell (PEMFC) application. In result, the best I-V characteristic was verified by the prepared MEA(membrane electrode assembly) from twisted CNF that had a diameter of 65 nm.

• Fibers and Polymers
• /
• v.3 no.4
• /
• pp.134-139
• /
• 2002

Carbon nanotubes are graphene sheets rolled up in cylinders with diameter as small as 1nm. Extensive work carried out in recent years has revealed the intriguing properties of this novel material. Exceptional property combined with low density of nanotubes makes them suitable for use as reinforcements in composites. Low volume of production and high cost is the main limitations towards their growth and application. Nanofibres bridge the gap between the conventional carbon fibre and the carbon nanotubes. With their low cost & comparatively higher volume of production along with their exceptional properties, the nanofibres are considered attractive material as nanoscale reinforcement. In this article a concise review of structure, property. production and application of carbon nanotubes and nanofibres have been discussed.

• Advances in nano research
• /
• v.9 no.4
• /
• pp.263-276
• /
• 2020

In this article, the acoustic responses of free vibrated natural fibre-reinforced polymer nanocomposite structure have been investigated first time with the help of commercial package (ANSYS) using the multiphysical modelling approach. The sound relevant data of the polymeric structure is obtained by varying weight fractions of the natural nanofibre within the composite. Firstly, the structural frequencies are obtained through a simulation model prepared in ANSYS and solved through the static structural analysis module. Further, the corresponding sound data within a certain range of frequencies are evaluated by modelling the medium through the boundary element steps with adequate coupling between structure and fluid via LMS Virtual Lab. The simulation model validity has been established by comparing the frequency and sound responses with published results. In addition, sets of experimentation are carried out for the eigenvalue and the sound pressure level for different weight fractions of natural fibre and compared with own simulation data. The experimental frequencies are obtained using own impact type vibration analyzer and recorded through LABVIEW support software. Similarly, the noise data due to the harmonically excited vibrating plate are recorded through the available Array microphone (40 PH and serial no: 190569). The numerical results and subsequent experimental comparison are indicating the comprehensiveness of the presently derived simulation model. Finally, the effects of structural design parameters (thickness ratio, aspect ratio and boundary conditions) on the acoustic behaviour of the natural-fibre reinforced nanocomposite are computed using the present multiphysical model and highlighted the inferences.