• Applied Biological Chemistry
• /
• v.14 no.1
• /
• pp.9-18
• /
• 1971

In order to obtain basic information on the production of single cell protein from petroleum, more than 400 yeast strains were isolated from various soil samples in Korea utilizing petroleum hydrocarbon as the sole carbon source. A yeast strain showing the highest cell yield among the isolated strains was selected and identified. The optimal culture condition was searched in the flasks shaken throughout the procedure. And the growing characteristics for the selected yeast strain and chemical analysis of the yeast cell component were carried out. The results obtained were as follows: 1. The selected yeast strain was identified as Candida curvata and we named it Candida curvata-SNU 70. 2. The composition of the medium proposed for the present yeast strain is: Light Gas Oil 30ml, Urea 400mg, Ammonium sulfate 100mg, Potasium phosphate (monobasic) 670mg, Sodium phosphate (dibasic) 330mg, Magnesium sulfate 500mg, Calcium carbonate 3g, Yeast extract 50mg, Tween 20 0.05ml, Tap water 1,000ml. 3. Other culture conditions employed for the yeast were pH 5.5-7.0, temp. $30^{\circ}C$ under an affluent aerobic state. 4. Addition of light gas oil in portions to the culture media as the growth proceeded was more effective, especially in the cultivation on the higher oil concentration media. 5. Studies on the propagation of the yeast cells in the light gas oil medium revealed that the yeast has the lag phase lasted 16 hours and the logarithmic growth phase covered 16 to 28 hours. The specific growth rate was about $0.22\;hr^{-1}$ and doubling time was 3.2 hrs. during the logarithmic growth phase. 6. Under the cultural condition employed, the cell yield against the amount of light gas oil (wt%) was 16.1% and the protein content of the dried yeast cells was 48.4%.

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.3
• /
• pp.309-322
• /
• 2016

This study was conducted to investigate the effect of science based on question-centered Havruta learning on the logical thinking and the science related attitude of elementary students. The number of participants were 93, 4 classes of 4th graders in G elementary school in C city. The experimental group, 2 classes including 46 participants, took science lessons based on question centered Havruta learning while the comparative group, 2 classes including 47 participants, took teacher-driven lessons using teacher's guidebook. Pre and post tests were done before and after executing lessons to assess the changing in each group's logical thinking and the science related attitude. And targeting experimental group, a perception survey toward Havruta learning was carried out and the results were arranged. The results of this study can be summarized as follows: First, the pre and post test results of logical thinking revealed that the experimental group showed higher improvement compared to the comparative group and the difference was meaningful. This implies that question centered Havruta classe has the effect of improving students' logical thinking. Second, from the pre and post test results of the science related attitude, we saw that the experimental group showed higher improvement compared to the comparative group and the difference was meaningful. This confirms that question centered Havruta class has the effect of improving students' science related attitude. Third, the survey regarding perspectives of experimental group students toward Havruta learning showed that students had a high satisfaction level.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.400-407
• /
• 2014

Urban farming supplies emotional stability and fresh vegetables to participating persons, however, no information regarding the biosafety of agricultural products from urban farming is available. Here, we collected 260 samples of Chinese cabbages and lettuce from 4 urban community gardens and 6 roof gardens in Seoul from September through October 2012, and monitored the microbiological and parasitological contamination quantitatively and/or qualitatively. The mean counts of total aerobic bacteria and coliforms were $6.1{\pm}0.8\;log\;CFU{\cdot}g^{-1}$ ( range, $5.4{\pm}0.6{\sim}7.1{\pm}0.8\;log\;CFU{\cdot}g^{-1}$) and $4.0{\pm}0.7\;log\;CFU{\cdot}g^{-1}$ (range, $2.3{\pm}0.6{\sim}6.1{\pm}0.9\;log\;CFU{\cdot}g^{-1}$), respectively. Coliforms were detected on 59.6% among 260 vegetable samples. There were no significant differences in the contamination levels of total aerobic bacteria and coliforms between the Chinese cabbages and lettuce, whereas both levels of vegetables from urban community gardens were higher than those of roof gardens (p > 0.05). Escherichia coli was isolated at 3.1% among whole vegetables, and contamination level was $1.5{\pm}0.2\;log\;CFU{\cdot}g^{-1}$. Among foodborne pathogens, Staphylococcus aureus was detected in 1.5%, however, Salmonella spp., Listeria monocytogenes and E. coli O157:H7 were not detected on any of the vegetable samples. We also found undefined parasite eggs from two samples of Chinese cabbages (0.8% of total vegetables we tested). From these study, we found the presence of microbial contamination of agricultural products from urban farming, thus we need further concern to improve the biosafety during production of agricultural products.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.1 no.1
• /
• pp.18-28
• /
• 1978

To study about the effect of harvested stage and physical treatment such as wilting or chopping of plant material on the quality of silage, Italian ryegrass(Lolium multiflorum) harvested at pre-headed or heading stage and Seombadi(Dystaenia takesimana Nakai) harvested at pre-flowering stage, were used for the purpose. The materials were treated in four different ways which were a) non-treated, b) one day-wilted, c) chopped with 1 to 2cm length and d) wilted and chopped, and those were ensiled in plastic containers and stored at room temperature for three months. After three months of storage, it was investigated and obtained the following results. 1) Having 6.31 of NFE/CP ratio and low content of crude fiber, Seombadi contained more suitable constituents for silage than Italian ryegrass. 2) Under the non-treated or chopped condition, the loss of NFE was higher, and lower with wilted material. 3) Wilting or chopping improved DM digestibility. 4) Compared with Italian ryegrass harvested at pre-headed stage, the storage amount per unit volume of heading stage-Italian ryegrass and Seombadi were higher 8% and 69% respectively, and wilting and/or chopping increased the storage amount 41 to 134%. 5) The majority of weight loss during storage was observed at 1st week after ensiling, it continued slightly until 4th week. The highest loss in 8th week were 3.76% of nontreated material. 6) One day wilting increased DM content of silage 23 to 131%. Wilting and chopping increased pH and lactic acid improved the quality considerably. 7) The correlation between $NH_3$ and butyric acid, and between lactic acid and DM were r=0.782**, r=0.634** respectively. The regression equation were y=12.853X+4.908 (X=butyric acid), y=0.016X+1.309(X=DM content), respectively. 8. The above results indicate that it is necessary to wilt or chop material to make good quality silage from Italian ryegrass, and such treatment can improve the quality of silage with Seombadi also.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• Korean Journal of Ecology and Environment
• /
• v.37 no.2 s.107
• /
• pp.248-254
• /
• 2004

This study was conducted to investigate the effects of salinity in irrigation water on the growth, yield components, yield and grain quality of rice plant by the pot experiments. Irrigation waters were supplied with control and amended with NaCl at 1,000, 2,000, 3,000, 5,000, and 7,000 ${\mu}s\;cm^{-1}$ electrical conductivity. A randomized block design was used with four replicates for each treatment and control. As increasing salt concentration, plant height, tiller number, SPAD value, dry weight, content of N, P, and K, ripened grain ratio (%), 1,000 grain weight, and protein content (%) tended to decrease, especially, significant at 3,000 ${\mu}s\;cm^{-1}$ of salt level. Grain yield decreased significantly at all treatments. The percentage of head rice slightly tended to increase as the salt concentration due to the decrease of green kernel. The percentage of green kernel was significantly lower at 3,000 ${\mu}s\;cm^{-1}$ of salt level than the control.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.121-130
• /
• 2014

Purpose: To assess the surface profile of dentinal wall, dentin chips and smear layer during the canal shaping with rotary (ProTaper) and ProFile and reciprocating (WaveOne) nickel-titanium file. Materials and Methods: Sixty human extracted mandibular premolars and incisors with single canals were randomly selected. Three experimental groups (n = 20) were instrumented with ProTaper (F2), ProFile (25/.06), WaveOne (25/.08) with irrigation of 2.5% NaOCl. The dentin chips were collected from flute of file during each canal preparation. After canal preparation, roots were grinded and each group was divided into two subgroups (n = 10) for surface profile and smear layer of dentinal wall of shaped root canal. Each specimen was observed under scanning electron microscope for evaluating size of dentin chips, root canal surface recessions and smear layer. Scores of Smear layer were statistically analyzed using Kruskal Wallis test and Mann Whitney test at P = 0.05 level. Results: The size of dentin chips from ProFile, ProTaper and WaveOne was up to $7{\mu}m$, $6.5{\mu}m$, and$4{\mu}m$, respectively. In the surface profile, the width of surface irregularity was measured and Profile, ProTaper and WaveOne was up to $150{\mu}m$, $70{\mu}m$, and $80{\mu}m$, respectively. Completely cleaned root canals were not found. In the middle and apical third of the canals, WaveOne group showed higher smear layer score than ProFile and ProTaper groups (P < 0.05). Conclusion: Within limits of this study, reciprocating motion WaveOne group was not significant difference of shaping ability with the full-sequence ProFile and ProTaper systems except canal clearness of middle and apical third of root canal. When using WaveOne to shaping root canal, thorough root canal irrigation is recommended.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.2
• /
• pp.161-172
• /
• 2002

Background : To Investigate the association between bronchial anthracofibrosis (AF) and tuberculosis (TB), and the clinical utility of a polymerase chain reaction (PCR) on bronchial specimens for rapid diagno-sis of active pulmonary TB in patients with bronchial AF. Method : Thirty patients (25 women and 5 men ranging in age from 53 to 88), who were diagnosed with bronchial AF by a bronchoscopic exami-nation, were enrolled in this study. PCR targeting the IS6110 segment of Mycobacterium tuberculosis was performed on the bronchial wash fluid and anthracofibrotic bronchial tissue. The PCR results were compared with the bacteriological, histological, and clinical findings. Results : Eighteen of the 30 patients (60%) were associated with TB, nine of whom were confirmed as having active TB. The remaining 9 had a past history of TB. The sputum or bronchial aspirate AFB smear, culture, and histological findings were positive in 4 (13%), 9 (30%), and 5 (17%) patients, respectively. PCR of the AF tissue and bronchial wash fluid was positive in 5 (17%) and 11 (37%) of the 30 patients, respectively. PCR was more sensitive than the AFB smears for diagnosing pulmonary TB (22 % us 89 %, respectively, p<0.05). All 5 patients with positive AF tissue PCR results also had both histological findings and positive bronchial wash fluid PCR results. Of the 3 patients with positive PCR but negative bacteriological or histological results, 2 of these patients appeared to have active tuberculosis on a clinical basis. Conclusion: Although TB-PCR did not reveal an increased association between bronchial AF and TB compared with traditional methods, PCR on the bronchial wash fluid appears to be useful for the rapid diagnosis of pulmonary TB in patients with bronchial AF. TB-PCR on AF bronchial tissue itself did not yield additional benefits for diagnosing TB, which suggests that an AF lesion itself may not be an active or original site of the infection, but a secondary change of TB.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.923-933
• /
• 2017

This study was carried out to examine the quality characteristics of Doenjang manufactured with or without soaking Meju in brine according to salt concentrations (8 and 12%) during fermentation for 6 months. The moisture content and salinity of Doenjang fermented for 6 months were 54.9-60.3% and 7.8-12.5%, respectively. Doenjang using soaking Meju in brine had higher pH and lower titratable acidity than that using non-soaking Meju. The reducing sugar content in all samples was increased until 2 months and then decreased regardless of soaking Meju, especially that of non-soaking 8% Doenjang was the highest. The 8% low-salt Doenjang was shown the highest amino-type nitrogen content, especially the soaking Doenjang was higher than the non-soaking Doenjang. ${\alpha}$-amylase activity of all samples during fermentation were continuously decreased from 0.91-0.94 Unit/g to 0.01-0.06 Unit/g, especially the 8% soaking Doenjang was shown the highest activity after 2 months. Total bacterial count of the soaking Doenjang at the 6 months was in range of 7.8-8.0 log CFU/g and that of the non-soaking Doenjang was in range of 7.2-7.5 log CFU/g. By taste analysis, the 8% soaking Doenjang was shown the similar taste pattern with commercial Doenjang. In conclusion, the 8% low-salt Doenjang manufactured with soaking Meju in brine was a suitable concentration in order to reduce salt intake.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.253-262
• /
• 2013

This experiment was conducted to investigate the effects of floor type and heating system on performance, housing environment and health status of ducks reared in three types of duck house (OD : Open floor house-Direct heating system, OF : Open floor house-Floor heating system and LD : Loft type house-Direct heating system). In OF treatment, PVC pipes were installed for heating under concrete floor and covered with litter. In LD treatment, plastic mesh was installed 50 cm above the floor so that duck's droppings can pass through it. Each treatment had four replicates of 25 birds (Cherry Valley duck breed) per pen. There were no significant differences in weight gain and feed intake of ducks for 6 weeks among all treatments. However, feed conversion ratio in LD was significantly higher (p<0.05) than that in OF. No differences were found in carcass charac- teristics, with the exception of abdominal fat weight where OF were higher than the others. Concentrations of $CO_2$ and $NH_3$ gas in OD were higher than those of OF and LD at 3, 4 and 5 weeks. Moisture content in litter of OF was lower than that of OD. In contrast, the amount of dust in the air was higher in OF than in OD. The amount of fuel used for 6 weeks in LD was lower about 21% than that in OD. Some of unusual symptoms were observed in open floor house and loft type house, such as lying, spraddle legged, twisted ankle and legs, wounded sole, or etc. No components of leukocyte and erythrocyte of blood were significantly different among all treatments. The results of this experiment showed that OF and LD systems had no positive effects on performance of meat type commercial duck. However, there were some positive effects of certain house type for the improvement of environmental condition in duck house for hygienic production. In the future, more research on the effect of various facilities and systems for duck house is needed.