• Resources Recycling
• /
• v.25 no.6
• /
• pp.50-57
• /
• 2016

This work was examined the extraction and stripping behavior of rare earths (La, Ce, Pr, Nd, Sm) from the hydrochloric acid solution by Cyanex 572 and compared to the results that of PC88A. Experimental parameters such as equilibrium pH, extractant & strip reagent concentration were observed and extraction percentage, distribution coefficient, stripping percentage and the separation factor of the adjacent element were analyzed. The $pH_{50}$ values was more higher using Cyanex 572 than that of PC88A. As the increase of the extractant concentration, the distribution coefficient of rare earth elements was increased. Stripping percentage of rare earth elementss from the Cyanex 572 was 85% to 95% and PC88A showed 80% to 87%. Separation factor of Ce/La, Ce/Pr, Pr/Nd, Nd/Sm was enhanced about 1.0-5.0 using Cyanex 572 as an extractant in mixture solution.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.175-183
• /
• 2022

With the expansion of the automobile market, the demand for Nd as an essential rare earth material for automobile motors is rapidly increasing. Research on the calcio-thermic reduction process between Nd₂O₃ and calcium-based alloys has been extensively studied in order to manufacture Nd. In this study, Ca-Cu, as a reducing for Nd₂O₃, was prepared by electrolysis in CaCl₂ molten salt. Cu wire and graphite were employed as a working electrode and a counter electrode for electrolysis reaction, respectively. The reference electrode was manufactured by putting Ag wire in a mixture of AgCl and CaCl₂ at a ratio of 1:99 mol%. The cyclic voltammetry results showed that the deposition of Ca²⁺ on the surface of working electrode was observed from a potential of -1.8 V, and the reduction potential of Ca²⁺ decreased as the reaction temperature increased. The diffusion coefficient of Ca²⁺ calculated by the chronoamperometry experiment was found to be 5.4(±6.8)×10^-6 cm²/s. In addition, Ca-Cu liquid alloy was prepared by applying a constant potential to Cu electrodes. The element ratio of Ca-Cu alloy formed by applying a potential of -2.0 V was found to Ca:Cu=1:4.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.35 no.1
• /
• pp.51-57
• /
• 2017

The tiny dragonfly, Nannophya pygmaea (Odonata: Libellulidae), is an endangered insect in South Korea. Previously, a partial mitochondrial DNA sequence that corresponded to a DNA barcoding region has been used to infer genetic diversity and gene flow. In this study, we additionally sequenced the barcoding region from N. pygmaea that had been collected from three previously sampled populations (40 individuals) and these sequences were combined with the preexisting data. We also selected and sequenced an additional mitochondrial gene (ND5) to find further variable gene regions in the mitochondrial genome. DNA barcoding sequences of 108 individuals from five South Korean localities showed that genetic diversity was highest in Gangjin, Jeollanam-do Province. Muuido, which was previously occupied by a single haplotype, was also found to have an identical haplotype, which confirmed the low genetic diversity on this islet. Gene flow among populations is highly limited, and no clear distance- or region-based geographic partitioning was observed. Phylogenetic relationships among haplotypes showed that there were no discernable haplotypes in South Korea. ND5 provided slightly more haplotypes compared to the barcoding region in 40 individuals (14 vs. 10 haplotypes in the COI gene). It also had a slightly higher within-locality diversity estimate, which suggested that ND5 had potential as mitochondrial DNA-based marker for population genetic analysis.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.1 no.1
• /
• pp.91-102
• /
• 2000

To prove the effect of Yukmijihwngwon(YMJHW) and Taeyoungjeon(TYJ) extract on the Meridian of Human body and Active oxygen experimentally, ORS & Free Radical of extract and precipitate of YMJHW and TYJ was measured. The results were summarized as follows; 1. TYJ extract, as a result of measuring QRIS, had a considerable effect on the function of pituitary gland, the 4th cervical vertebra and the 1 st lumbar vertebra. 2. TYJ precipitate, as a result of measuring QRIS, had a considerable effect on the function of liver, uterus, and vertebra. 3. YMJHW extract, as a result of measuring QRIS, had a considerable effect on the function of lung, adrenalin gland, bladder, prostate gland, ovaria, the 2nd cervical vertebra, the 3rd cervical vertebra, the 5th cervical vertebra, the 6th cervical vertebra, the 2nd lumbar vertebra, the 4th lumbar vertebra and the 5th lumbar vertebra. 4. YMJHW precipitate, as a result of measuring QRIS, had a considerable effect on the function of spleen, lung, kidney, adrenal gland, bladder, ovaria, the 2nd cervical vertebra, the 6th cervical vertebra, the 7th cervical vertebra, the 2nd lumbar vertebra, the 5th lumbar vertebra, sacrum, and knee joint. 5. As a result of measuring Free Radical, the level of TYJ is higher than YMJHW. It is thiut that's because of Duchung and roasted Gamcho. 6. As an order of QRIS levels, YMJHW precipitate is the highest, YMJHW extract is next, TYJ extract and TYJ precipitate. These results suggested that TYJ and YMJHW be usefully applied for suppressing of abnormal Meridian and noxious oxygen, preventing and curing all the disease.

• Journal of the Korean Chemical Society
• /
• v.38 no.1
• /
• pp.50-54
• /
• 1994

Spectrophotometric determination of some light lanthanide ions by flow injection method is described. Chromeazurol S forms water soluble complex with lanthanide ions in the presence of DTAB. The absorption maximum of the complexes are from 650 nm to 655 nm and the molar absorptivities were ca. $1.8{\times}10^5\;L mol^{-1}cm^{-1}$ on Tris buffer (pH 10.5). The calibration curves for Nd(III), Eu(III) and Sm(III) obtained by FIA are over the range of 0.1 to 0.6 ppm and the correlation coefficient were ca. 0.9993. The detection limits (S/N) were from 10 ppb for Nd(III) and Eu(III) to 20 ppb for Sm(III). The relative standard deviations was ${\pm}$.2% for 0.4 ppm sample. The samples throughput was ca. $50\;cm^{-1}$.

• Journal of the Korean Magnetics Society
• /
• v.13 no.3
• /
• pp.115-120
• /
• 2003

We have developed laser micro-machining technology for fabrication of the micro thin-film inductors. After the thin layers of FM/M/FM films were coated to the silicon substrate by using the conventional sputtering method, the new laser machining was applied to the patterning process that used to be carried out by the semiconductor lithography procedure. A CW Nd:YAG laser operating in TEM$\sub$00/ mode was actively Q-switched to obtain the very short pulse of 200 ns. The laser micro-machining process with pulse energy and repetition rate have been optimized as 5 mJ/pulse and 5 kHz, respectively, to obtain the line resolution as fine as 20 $\mu\textrm{m}$.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.427-431
• /
• 1998

This study was undertaken to investigate the effect of exercise induced pulmonary hemorrhage(EIPH) on the finishing position of racehorses, 400 bleeders(305: 1 time, 76: 2 times, 19: 3 times, total: 514 cases) which had bled(EIPH) from their nostrils after their races at the Seoul racecourse during the 5 years period('93-'97) were analyzed for this study. The ratio of bleeders to total racehorses in finishing position 1-3,4-6, 7-9 or above 10 was 0.55, 0.84, 0.90 or 1.13%, respectively. There is tendency to higher incidence of bleeding in the later positioned racehorses group. To analyze the correlation between EIPH and finishing position, finishing potion of each EIPHed horses' was checked at 7 successive races(3 races each before/after EIPH. The average final position at the -3rd race, -2nd racer -lst racer EIPHed race, 1st race,2nd race and 3rd race of each bleeder was 5.85. 5.94, 6.21, 7.32, 7.20, 6.51 and 6.53, respectively. Raring times were adjusted to 1,000 m equivalent. Average racing times of the -3rd race,-2nd racer -lst raced EIPHed race, 1st race, 2nd race and 3rd race of each bleeder was 67.1, 67.1, 67.2, 67.6, 67.5, 67.4 and 67.3 second, respectively. Bleeders which finished the race within 1 second following the winners were 25. 3% of total bleeders. The rest 74.7% reached at the finish line 1 second later than the winners. Particularly 46.3% of bleeders were above 2 second later. Therefore this study suggested that bleeding has effect on performance of the racehorse, consequently it make bleeders be placed later positions.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.163-173
• /
• 2020

Objectives: The study was evaluated exposure variation and daily absorption level of cadmium, lead concentration of ambient air of monthly data from 1999 to 2017 for main exposure factor in outdoor workers. Methods: Based on the monthly data from 'The annual report of air quality in Korea from 1999 to 2018' in 'Air Korea' website in the Korean Ministry of Environment. The monthly data of PM_2.5, PM₁₀, cadmium, lead concentration of ambient air were recalculated to average, minimum, and maximum. And these data were combined to Asian-dust exposure data from 'The annual report of Asian-dust·smog in 2017' of National Institute of Meteorological Sciences in Korea. Results: Geometric mean(minimum-maximum) concentration in ambient air of monthly data were 0.0017 (ND-0.2015) mg/㎥ in cadmium and 0.0467(ND-0.8554) mg/㎥ in Pb from 1999 to 2017. Both of Cd and Pb concentration in ambient air showed the highest concentration in January and the lowest in August among annual variation from 1999 to 2017. PM₁₀ and PM_2.5 level showed the highest in March(PM₁₀) and February (PM_2.5) the lowest in August both of PM₁₀ and PM_2.5. Discussion: Based on exposure data and prior reports, daily Cd absorption was estimated to 0.013(ND-1.511) mg/day from respiration and 1.89 mg/day from daily food(25.2 mg/day of daily Cd intake). In case of Pb, daily absorption was estimated to 0.350(ND-6.416) mg/day from respiration and 1.38-1.71 mg/day from daily food intake. Conclusion: Cd and Pb with Asian-dust have high influential factor to increase the Cd and Pb exposure at Winter and Spring season in outdoor workers.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.1_2
• /
• pp.135-142
• /
• 1992

This study was performed to define the anatomical position of the mandibular canal and the findings during the sagittal split ramus osteotomy of the mandible. The mandibles of 20 adult Korean were used. The dimension of mandibular canal from the mandibular foramen to the 1st molar was measured at 4 specific coronal-sectional location by CT scan. The results were as follows ; 1. The distance from the mandibular canal to the medial aspect of the buccal cortical plate was greatest($4.5{\pm}1.1mm$) at 2nd molar area and was not significantly greater than at any other section. 2. Buccal cortex was thickest($3.8{\pm}0.9mm$) at 2nd molar and thinnest ($2.5{\pm}0.3mm$) mandibular foramen um 3. The distance from the mandibular canal to the medial aspect of the lingual cortical plate was not significant at any sections. 4. The distance from the mandible canal to the inferior border of mandible was greatest at the mandibular foramen($20.7{\pm}3.9mm$). The canal was located more closely to the inferior border at 1st, 2nd molar area 5. The diameter of the mandibular canal was between $2.5{\pm}0.3mm$ and $2.8{\pm}0.6mm$. 6. The total mandibular thickness was greatest($21.1{\pm}2.6mm$) at 2nd molar area and narrowest($17.2{\pm}3.2mm$) at mandibular foramen area.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.697-702
• /
• 2011

Ion exchange resins have been synthesized from chloromethylated styrene-1,4-divinylbenzene (DVB) with 1%, 2%, 5% and 15%-crosslinkage and macrocyclic ligand of $OenNdien-H_4$ by copolymerization. The adsorption characteristics of uranium (${UO_2}^{2+}$), potassium ($K^+$) and neodymium ($Nd^{3+}$) metallic ions have been investigated. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time, and crosslinkage on adsorption of metallic ions were also studied. The uranium ion showed the fast adsorption on the resins above pH 3. The optimum equilibrium time for the adsorption of metallic ions was about two hours. The adsorption selectivity determined in methanol solution was in increasing order uranium (${UO_2}^{2+}$) > potassium ($K^+$) > neodymium ($Nd^{3+}$) ion. Moreover, the adsorption was increased with the crosslinkage concentration in order of 1%, 2%, 5% and 15%-crosslinkage resin.