• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.87-102
• /
• 1997

The absolute absorbed dose can be determined according to the measurement conditions; measurement material, detector, energy and calibration protocols. The purpose of this study is to compare the absolute absorbed dose due to the differences of measurement condition and calibration protocols for photon beams. Dosimetric measurements were performed with a farmer type PTW and NEL ionization chambers in water, solid water, and polystyrene phantoms using 6MV photon beams from Siemens linear accelerator. Measurements were made along the central axis of 10cm $\times$ 10cm field size for constant target to surface distance of 100cm for water, solid water and polystyrene phantom. Theoretical absorbed dose intercomparisons between TG21 and IAEA protocol were performed for various measurement combinations of phantom, ion chamber, and electrometer. There were no significant differences of absorbed dose value between TG21 and IAEA protocol. The differences between two protocols are within 1％ while the average value of IAEA protocol was 0.5％ smaller than TG21 protocol. For the purpose of comparison, all the relative absorbed dose were nomalized to NEL ion chamber with Keithley electrometer and water phantom, The average differences are within 1％, but individual discrepancies are in the range of - 2.5％ to 1.2％ depending upon the choice of measurement combination. The largest discrepancy of - 2.5％ was observed when NEL ion chamber with Keithley electrometer is used in solid water phantom. The main cause for this discrepancy is due to the use of same parameters of stopping power, absorption coeficient, etc. as used in water phantom. It should be mentioned that the solid water phantom is not recommended for absolute dose calibration as the alternative of water, since absorbed dose show some dependency on phantom material other than water. In conclusion, the trend of variation was not much dependent on calibration protocol. However, it shows that absorbed dose could be affected by phantom material other than water.

• 모자간호학회지
• /
• v.2 no.1
• /
• pp.21-33
• /
• 1992

This study was done to investigate how importantly midwives thought of Lamaze Method of Childbirth, how satisfactorily they performed their Lamaze Method of Childbirth and what inhibited their activities from being performed if not done satisfactorily. The subjects of this study were 76midwives at midwifery in Pusan, Deagu, Kyungnam and Kyungbok. Data were collected by using questionaire from Sep. 1 to Sep.30, 1991. The measurement tools was maded by the researcher based on Kim's scale for prenatal nursing activities. The statistical analysis was done with based statistical values likes frequencies, means, standard deviations and advanced methods such as Pearson's correlation coefficient, 1-test, F-test, F-test by using SPSS package program. The results of this study can be summarized as follows ; 1. The results of Investigating perception according to importance degree and performance degree of Lamaze Method of Childbring showed that midwives were slightly below both perception according to importance(2.17) and performance(2.16) of Lamaze Method of Childbirth 2. Inhibiting factors of Lamaze Method of Childbirth were abscence of husband(3.08), lack of teaching room(2.71), and lack of books or literature of Lamaze Method (2.58). 3. There appears to be a positive relation between perception according to importance degree and performance degree of Lamaze Method of Childbirth (r=0.69, P<0.01). There appears to be a negative relation between perception according to importance degree and inhibit factors of performance (r=-0.38, P<0.01). There appears to be a negative relation between performance and inhibit factors of performance (r=-0.22. P<0.01). 4. The item of highest perception defree in prenatal education is 1st, Consultation about sexual life (2.53), End, illustration of the importance of a bath and perinal cleanliness and Avoidance of excessive respiration method and also its comfortable application during uterine contractility(2.45). The item of lowest perception degree is about pregnant symptom sign and predicted date of birth (E.D.C.). On the other hand, The item of highest performance degree is education about nurtrition during pregnacy. 2nd, Illustration of the Importance of a bath and perineal cleanness(2.45). The lowest one is leaching the pregnant woman and her family about the role of husband and her family and also teaching the couple to learn exercise and respiration method (1.84). Though importance perception degree and performance degree is low. Midwives who wert subject in this research shoves that they perform general items concerning prenatal education well. 5. In the relationship between perception according to importance degree of Lamaze Method of Childbirth and the general characteristics of subjects, the differences in mean number of visiting pregnacies for 1 month. 6. In the relationship between performance degree of Lamaze Method of Childbirth and the general characteristics of subjects, the differences in age, marriage, and mean number of visiting pregnancies for 1 month. With the above information we see the importance of midwife prenatal care education and high correlation between performance degree and perception degree. When Lamaze prenatal education is well performed the number of pregnant woman who have follow-up, check-ups increase. Therefore in this research we can validity that there is a relation between Lamaze prenatal education and patient follow-up. This research showes in a situation where if one does not maximally perform a prenatal education there is a possibility that the popular use of midwife activities may encounter obstacles so the education to save new knowledge and training for prenatal education is needed as a function of Lamaze prenatal education, when a special Lamaze education is well performed for the pregnant woman, who follows-up at amidwife clinic. With the above conclusion we can suggest : 1. Continued research which minimized obstacles to Lamaze prenatal education is needed. 2. The official method of midwives is necessary.

• Journal of National Security and Military Science
• /
• s.7
• /
• pp.155-231
• /
• 2009

Xu-Jing(徐競) an official of the Song(宋), a medieval Kingdom of China, wrote a book titled $\ll$Koryo Tu Jing(高麗圖經)$\gg$ which explains his travel to the Koryo as a member of diplomatic mission in 1123. $\ll$Koryo Tu Jing$\gg$ is the record of his personal experience in Koryo with many explanatory illustrations and especially contains 5 months' voyage record of his diplomatic fleet. His fleet set sail at a port located in the Ding Hai Xian(定海縣), Ming Zhou(明州) via a few islands of Koryo [Hyup Kye San(俠界山) , the Kun San Do(群山島) , the Ja Yon Do(紫燕島) , the Keup Su Mun(急水門) in Kang Hwa Gun(江華郡) and the Hap Gul(蛤窟) ] and finally arrived the Port Ye Song Hang(禮成港) . According to the Xu-Jing's record his fleet sailed the sea with the help of the favorable seaward winds and tides as the usual way of ancient sailing. The Xu- Jing's Fleet sailed the sea between the Mei Cen(梅岑), Ming Zhou(明州) of China and the Hyup Kye San(俠界山) of Koryo from about 5:00 a.m., May 24th(of the lunar calendar) to about 5:00 p.m., June 2nd. At this section, the average speed of the seaward winds was 19.45km/h and the average speed of the fleet which sailed only by the power of the winds was 6.29km/h. This means that 32.3% of the favorable seaward winds' speed was equal to the speed of the ancient fleet which sailed only by the power of the favorable seaward winds. The fleet sailed the sea between the Ja Yon Do(紫燕島) and the Keup Su Mun(急水門) from about 9:00 a.m., June 10th to about 1:00 p.m., the same day. At this section the fleet sailed by the power of tides in addition to the favorable seaward winds without oaring. The average speed of the winds was not different from that of former section and the average speed of the tides was 1.937km/h. And at this section the average speed of the fleet increased by 0.41km/h than that of the former section. This means that 21.1% of the speed of the tides was equal to the increased speed of the ancient fleet by virtue of the tides. The fleet sailed the sea between Keup Su Mun(急水門) and the Hap Gul(蛤窟) from about 1:00 p.m., June 10th to about 3:00 p.m., the same day. At this section, there were no seaward winds and the fleet sailed only by the powers of tides and oaring. And at this section, the tide increased the average speed of the fleet by 0.3114km/h and the fleet could sail at the speed of 4.3km/h. So we can conclude that the average speed of ancient fleet without any influences of the seaward winds and tides was 3.98 km/h. We can make use of the various sailing speeds of ancient fleets when judging their maritime activities. If we make use of the various sailing speeds of the ancient fleets as calculated in this article, we will be able to get various important informations about the certain ancient fleet's maritime maneuver. For example, we can infer the sailing routs of a certain fleet and the time when the fleet passed a certain spot by making use of the various sailing speeds of the ancient fleet. In this article I did not take account of the shapes of ships that consist of the ancient fleets and the sizes of the various ships and fleets. It was because that such factors would not change the foresaid conclusions seriously.

• Korean journal of applied entomology
• /
• v.51 no.2
• /
• pp.171-190
• /
• 2012

The Korean Society of Applied Entomology (KSAE) celebrates its First 50 years history this year, 2011. It began in the year 1962, as the Korean Society of Plant Protection (KSPP) to discuss all aspects of plant protection including entomology and plant pathology. At that time it was one of the earliest scientific ones among agricultural societies in Korea. Before liberation from the Japanese colonial rule there were a few scientific societies for Japanese scientists only in the Korean Peninsula. It seemed that there was a single exception, in medical field, formed by and operated for Korean ethnics. Right after the liberation, Korean scientists rushed to form new scientific societies in the fields of mechanical engineering, architecture, textile, internal medicine, biology, etc. in 1945, mathematics, chemistry, metallurgy, etc. in 1946, and so on. But agricultural scientists had to wait for more time before setting up their own scientific society, Korean Agricultural Society(韓國農學會), comprising all agricultural subfields, in 1954. They had annual meetings and published their own journal every year until 1962. Then those working in the plant protection field established their own KSPP, right after their section meeting in 1962. At that time the total number of participants for KSPP were only around 50. KSPP scientists were interested in plant pathology, agricultural chemicals, weed science, or bioclimate, besides entomology. They had annual meetings once or twice a year until 1987 and published their own journal, Korean Journal of Plant Protection (KJPP), once a year at the earlier years but soon gradually increasing the frequency to four times a year later. Articles on entomology and plant pathology occupied about 40% each, but the number of oral or posters were a little bit higher on plant pathology than entomology, with the rest on nematology, agricultural chemicals, or soil microarthropods. There also had a number of symposia and special lectures. The presidentship lasted for two years and most of president served only one term, except for the first two. The current president should be $28^{th}$. In the year 1988, KSPP had to be transformed into the applied entomology society, Korean Society of Applied Entomology (KSAE), because most of plant pathologists participating left the society to set up their own one, Korean Society of Plant Pathology in 1984. Since that time the Society concentrates on entomology, basic and applied, with some notes on nematology, acarology, soil microarthropods, agricultural chemicals, etc. The Society has been hosting annual meetings at least twice a year with special lectures and symposia, from time to time, on various topics. It also hosted international symposia including binational scientific meetings twice with two different Japanese (applied entomology in 2003 and acarology in 2009) societies and the Asia-Pacific Congress of Entomology in 2005. The regular society meeting of this year, 2011, turns out to be the 43rd and this autumn non-regular meeting would be the 42nd. It has been publishing two different scientific journals, Korean Journal of Applied Entomology (KJAE) since 1988 and the Journal of Asia-Pacific Entomology (JAPE) since 1998. Both journals are published 4 times a year, with articles written in Korean or English in the first, but those in English only in the latter with cooperation from the Taiwan Entomological Society and the Malaysian Plant Protection Society since 2008. It is now enlisted as one of those SCI(science citation index) extended. The highest number of topics discussed at their annual meetings was on ecology, behavior, and host resistance. But at the annual meetings jointly with the Korean Society of Entomology, members were more interested in basic aspects, instead of applied aspects, such as physiology and molecular biology fields. Among those societies related to entomology and plant protection, plant pathology, pesticide, and applied entomology societies are almost similar in membership, but entomology and plant pathology societies are publishing more number of articles than any others. The Society is running beautifully, but there are a few points to be made for further improvement. First, the articles or posters should be correctly categorized on the journals or proceedings. It may be a good idea to ask members to give their own version of correct category for their submissions, either oral or poster or written publication. The category should be classified detailed as much as possible (one kind of example would be systematics, morphology, evolution, ecology, behavior, host preference or resistance, physiology, anatomy, chemical ecology, molecular biology, pathology, chemical control, insecticides, insecticide resistance, biocontrol, biorational control, natural enemies, agricultural pest, forest pest, medical pest, etc.) and such scheme should be given to members beforehand. The members should give one or two, first and second, choices when submitting, if they want. Then the categories might be combined or grouped during editing for optimal arrangement for journals or proceedings. Secondly the journals should carry complete content of the particular year and author index at the last issue of that year. I would also like to have other information, such as awards and awardees in handy way. I could not find any document for listing awards. Such information or article categorization may be assigned to one of the vice presidents. I would rather strongly recommend that the society should give more time and energy on archive management to keep better and more correct history records.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.215-221
• /
• 2016

This study examined the effects of delayed harvest of Miscanthus on its biomass yield and growth characteristics. The trial was conducted at a 5-year-old demonstration field, using Miscanthus sacchariflorus cv. Geodae 1 and Miscanthus ${\times}$ giganteus. Harvesting was carried out using a mower, baler, and bale picker driven by a 5-ton tractor. Harvesting dates were the $1^{st}$, $10^{th}$, and $17^{th}$ of April, which respectively corresponded with the first, mid, and last emerging dates of new shoots. The sequential changes in stem number due to delayed harvesting were investigated on April $29^{th}$, May $27^{th}$, July $22^{nd}$, and October $30^{th}$, which corresponded to the juvenile, mid, luxuriant, and senescence stem stages, respectively. Soil penetration resistance, biomass yield, and growth characteristics were investigated on October $30^{th}$. There was no difference in soil penetration resistance at a depth of 10 cm, but it increased at a depth of 20 cm in proportion to the delayed harvesting time. The sequential change in stem number due to delayed harvesting was greater in M. sacchariflorus cv. Geodae 1 than in M. ${\times}$ giganteus. In M. sacchariflorus cv. Geodae 1, which was harvested on the last emerging date of new shoots, the stem number was $169/m^2$ in the mid stage but decreased to $70/m^2$ in the luxuriant stage. The diameter of newly developed rhizomes, stem height, and biomass yield decreased in the two Miscanthus species due to delayed harvesting. The ratio of Miscanthus headings, which is a critical characteristic for landscape use, also decreased due to delayed harvesting. Heading of M. sacchariflorus cv. Geodae 1 was not observed in plots harvested on the mid and last emerging dates of new shoots.

• Journal of Elementary Mathematics Education in Korea
• /
• v.5 no.1
• /
• pp.99-120
• /
• 2001

The purpose of this thesis is to find the guiding direction of mathematical communication in lower grade students of elementary school and to present a new direction about the effect of using concrete material in communication. It is expected that mathematical communication increases when concrete material is used for the students of the lower grades, who are in concrete operational period. Therefore, this study ai s to investigate what characteristics there are in mathematical communication of second grade students and what effect concrete materials have on mathematical communication and learning. The analysis of the teaching record shows that the second grade students use alternative terms in the process of communication since they are not familiar with mathematical symbols or terms, which is a characteristic of communication in a mathematics class in which concrete material is used. In the process of teaming the students apply their living experiences to their teaming. Since a small number of students lead class, the interaction between students is also led by them. The direction of communication in a small group is not centered around solution of a problem, and most students show a more interest in finding answers than in the process of learning. The effect that concrete material has on communication plays an important role in promoting students' speaking activity; it allows students to identify and correct their errors more easily. It also makes students' activities more predictable, and it increases a small group activities through the medium of concrete material. However, it was also noticed that students' listening activities are not appropriately developed since they do not pay attention to a teacher who uses concrete material. The effects that concrete material has on mathematics class can be summarized as follows. Concrete material promotes students' participation in class by triggering their interest of learning of mathematics and helps them to understand the course of learning. It also helps the teaming and formation of concepts for children of low academic performance. And it makes a phased learning possible according to students' ability to use concrete material and to solve a problem. Based upon the results above mentioned, the use of concrete material is absolutely needed in mathematics classes of lower grade elementary school students since it increases communication and gives much influence on mathematics learning. Therefore, teachers need to develop teaching or learning method which can help increase communication, considering the characteristics of students' communication.

• Journal of Science Education
• /
• v.32 no.2
• /
• pp.71-86
• /
• 2008

The purpose of this study was to apply After-school programs related to sub-chapter 'The Change of Weather', and thereby to investigate the effect of After-school program on science-related attitude and learning achievement of students, and interaction between treatment methods and students' learning ability. The subjects of study consisted of 2nd grade students of sixty four students in high school. Sixty four students were divided into two categories by experimental and control groups on the basis of midterm examination before teaching treatment. The experimental groups have received four After-school programs including making models of a weather front, measurement of wind, measurement of temperature and the dew point, making a three-dimensional weather chart which were developed by researcher for six times. The control groups have received the instruction through the conventional teaching methods. Seventy questions within seven frameworks of TOSRA have been used in this study as an evaluation instrument of science-related attitude. Learning achievement has been evaluated using an instrument developed by researcher. The scores of both pre-test and post-test were estimated by ANCOVA. The results of this study can be summarized as follows. (1) After-school programs were more effective in progressing the three categories of science related attitude of high school students i.e. pleasure of science class(p<.05), reception of scientific attitude(p<.01), attitude about a science research(p<.05) than conventional teaching methods. (2) Experimental groups showed statistically significant improvement on learning achievement than control groups(p<.05). (3) The effect of treatment methods on students' learning ability has been improved in experimental groups more positively than control groups(p<.05). High level students in experimental groups showed significant improvement on learning achievement than low level students according to the representing profile plot. But there were no significant interaction between treatment methods and students' learning ability(p>.05) In conclusion, the After-school programs have positive effect on the improvement of science related attitude and learning achievement.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.135-158
• /
• 1994

The fashion industry of today is closely re-lated with the information activity. This study investigates now they take advantage of the fashion information by analysing some related fields including fashion design. Furthormore this study identify the factor which makes the design activity distinctive and predict and fu-ture trend in design. The purposes of this study through analysis are : to help find the way to facilitate the fashion industry and to develop the fashion merchandising in order to activate the re-cession of manufacturers and to improve competitiveness in the world market and to contribute to the academic achievement in the study of fashion merchandising. In the experimental approach the tasks of research are as follows: Research 1: The application of fashion infor-mation is discussed in terms of process and level. Research 2: The differences of the fashion design activities are captured on the basis of the characteristics of manufactures and fashion specialists and fashion information ac-tivities. The factors are identified which pre-dict and discriminate the results of fashion de-sign activities. The questionaire and interview were conduc-ted among women's clothing manufactures in Seoul and their fashion specialists in charge of merchandise development. The methods of survey were designed on the basis of theories developed so far and on he advice from the social scientists and fashion specialists. the methods were corrected and complemented through the 1st and 2nd preliminary investigations before their application For data analysis cronbach's a coefficient fre-quency percentage average standard devi-ation pearson's correlation coefficient were calculated and t-test F-test(ANOVA) Duncan's multiple range test regression and Discriminant analysis were conducted. The results of analysis throughout the experimen-tal studies were as follows: 1. The analysis of fashion in formation (1) the present application of information a. The source of information : Both the foreign and the domestic information came mostly from fashion journals magazines newspapers and other periodicals, the main source of market information was collected from the survey of popular items in recent years the data about the life-style of customers and their tastes for wearing were widely used as the information about consumers. b. The applicaton of information : The most widely used information was about fabrics. The foreign information was prefered on the whole. The domestic problems pointed out in this investgation were that the domestic journals showed the lack of specialty and the special organizations for fashion informatino were in urgent need. (2) The research of fashion information a. The various processes and levels of in-formation activities: Among the process of collection analysis and distribution the collec-tion process showed a good acheivement whereas the distribution whereas the distribution didn't. In levels of the systematic activities the acceptance of support and the utility of supported instruments the first indicated a high degree whereas the second showed lowest. b. The correlationship among subvariables : There was a significant correlation between the collection and the analysis process. The systematic activities revealed close relation-ship with the analysis process and the accept-ance of support with the distribution process. The close correlation was found between the utility of supported instruments and the analy-sis process. 2. The analysis of the fashion design activities (1) No significant differences were found in the design activities when the characteristics of companies were compared only. (2) According to the characteristics of fashion specialists the one with age experi-ence and high income showed rather good achievement but no significant differences were captured among sex department in charge title academic background education in abroad and field experience (3) The fashion information activities were strongly correlated with the design achieve-ment : The analysis process and the system-atic activity level had a great influence on the design activities. (4) In order to examine which cha-racteristics in (1-3) made it possible to pre-dct and discriminate the achievement in de-sign activities the Discriminant analysis was carried out. The results were as follows: the fashion information activities showed the highest discriminant rate. Next came the in-come level experience and age in that order Those four variables discrimated 37 from 50 who showed great achievement in design area (74%) and 51 from 83 in low achievement group (81%) Thus the total discriminant rate was 77.5%.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.791-798
• /
• 1998

To develop natural flavoring substances. optimal hydrolysis conditions for two stage enzyme hydrolysates (TSEH) using low-utilized shellfishes such as purplish clam and frozen oyster stored at $-20^{\circ}C$ for 60 days. The optimal conditions for TSEH method were revealed in temperature at $50^{\circ}C$ 3 hours digestion with alcalase (Aroase AP-10, $0.3%$ w/v, pH 8.0) at the 1st stage and $45^{\circ}C$ 2 hours digestion with neutrase (Pandidase NP-2, $0.3\%$ w/v, pH 6.0) at the 2nd stage. Among water extracts, autolytic extracts and 4 kinds of enzyme hydrolysates tests, TSEH method was superior to other methods on the aspect of yields, nitrogen contents, taste such as umami and control of off-flayer formation, and transparency of extracts. From the results of chemical experiments and sensory evaluation, we may conclude that TSEH from low-utilized marine products is more flavorable compared the conventional enzyme hydrolysates, it could be commercialized as the seasoning substances.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.4
• /
• pp.228-232
• /
• 2006

Purpose: electrophilic $^{18}F(T_{1/2}=110\;min)$ radionuclide in the form of $[^{18}F]F_2$ gas is of great significance for labeling radiopharmaceuticals for positron omission tomography (PET). However, its production In high yield and with high specific radioactivity is still a challenge to overcome several problems on targetry. The aim of the present study was to develop a method suitable for the routine production of $[^{18}F]F_2$ for the electrophilic substitution reaction. Materials and Methods: The target was designed water-cooled aluminum target chamber system with a conical bore shape. Production of the elemental fluorine was carried out via the $^{18}O(p,n)^{18}F$ reaction using a two-step irradiation protocol. In the first irradiation, the target filled with highly enriched $^{18}O_2$ was irradiated with protons for $^{18}F$ production, which were adsorbed on the inner surface of target body. In the second irradiation, the mixed gas ($1%[^{19}F]F_2/Ar$) was leaded into the target chamber, fellowing a short irradiation of proton for isotopic exchange between the carrier-fluorine and the radiofluorine absorbed in the target chamber. Optimization of production was performed as the function of irradiation time, the beam current and $^{18}O_2$ loading pressure. Results: Production runs was performed under the following optimum conditions: The 1st irradiation for the nuclear reaction (15.0 bar of 97% enriched $^{18}O_2$, 13.2 MeV protons, 30 ${\mu}A$, 60-90 min irradiation), the recovery of enriched oxygen via cryogenic pumping; The 2nd irradiation for the recovery of absorbed radiofluorine (12.0 bar of 1% $[^{19}F]fluorine/argon$ gas, 13.2 MeV protons, 30 ${\mu}A$, 20-30 min irradiation) the recovery of $[^{18}F]fluorine$ for synthesis. The yield of $[^{18}F]fluorine$ at EOB (end of bombardment) was achieved around $34{\pm}6.0$ GBq (n>10). Conclusion: The production of $^{18}F$ electrophilic agent via $^{18}O(p,n)^{18}F$ reaction was much under investigation. Especially, an aluminum gas target was very advantageous for routine production of $[^{18}F]fluorine$. These results suggest the possibility to use $[^{18}F]F_2$ gas as a electrophilic substitution agent.