• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.992-997
• /
• 2002

Two in vivo experiments were conducted to evaluate the effect of novel urease inhibitor hydroquinone (HQ) on ammonia release rate from urea hydrolysis, nitrogen balance, nutrient digestibility and efficiency of microbial protein synthesis. In Exp. 1, twelve crossbred cannulated lambs were randomly assigned within initial body weight block to one of four HQ treatments, which included 0 (control), 30, 60 or 80 mg HQ/kg DM intake. Ammonia concentration and pH of ruminal fluid were immediately measured at 0, 2, 4, 6 and 8 h after feeding. Increasing the dose of HQ tended (p<0.15) to linearly decrease NH3 formation. The ammonia peak concentration (2 h post-feeding) in animals receiving HQ was approximately one-half of that in animals not receiving HQ (p<0.01), and a relatively sustained ammonia release could be obtained at the dose of 30 or 60 mg HQ/kg DM. In Exp. 2, sixteen intact crossbred lambs (weight $40{\pm}0.8kg$) were used in a $2{\times}2$ factorial design experiment. The four rations consisting of soybean meal-based (SBM) or urea-based (Urea) nitrogen source with or without HQ (S1, S0, U1 and U0) were fed in digestion and N balance trials. Apparent digestibility of major nutrients except that of ADF was not affected by either nitrogen source or addition of HQ. Regardless of nitrogen source, supplementation of HQ significantly improved ADF digestibility (p<0.05). The various ration had no effects on N metabolism in the presence of HQ. There was significant difference between total purine derivatives (PD), estimated efficiency of microbial N synthesis (p<0.05) and urea-N excretion (p<0.01) in the urine for the SBM ration and for the Urea ration. However, HQ had little influence on efficiency of microbial N synthesis as proportion of daily intake of total tract digestible OM (p>0.05). No interactions between main nitrogen source and HQ were measured throughout the trial. Results of this study suggest that addition of HQ to ration may improve ADF digestion with having no negative effect on N metabolism and microbial protein production.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.46-52
• /
• 2023

The most abundant flavanone of grapefruits, naringenin (NN), is well known for its hepatoprotective, anti-lipid peroxidation and anti-carcinogenic effects. We generated three derivatives from NN using this technique in previous studies. Among them, it was confirmed that naringenin-7-O-phosphate (N7P), whose biological and physicochemical properties were not reported, showed a water solubility 45 times higher than that of NN. Therefore, in this study, the anti-inflammatory activity was evaluated in RAW 264.7 cells to investigate the potential physiological activity of N7P. As a result, N7P showed nitric oxide (NO) inhibitory activity at concentrations that did not show toxicity. In addition, prostaglandin E₂ (PGE₂) showed significant inhibitory activity from the lowest concentration of 12.5 μM and showed increased inhibitory activity compared to NN. In addition, as a result of western blot, N7P showed increased cyclooxygenase-2 (COX-2) inhibitory activity than NN, and effectively inhibited NO and PGE₂ by significantly inhibiting their expression pathways. N7P also inhibited inflammatory cytokines, including tumor necrosis factor-α, interleukin-6. Based on these results, we propose that N7P can be used as a potent antiinflammatory agent.

• Journal of Korea Foundry Society
• /
• v.18 no.4
• /
• pp.383-388
• /
• 1998

Effects of $CaCN_2$ addition on the grain refinement in the AM60 magnesium ingots were investigated. The effects of the $CaCN_2$ are estimated with different inoculation temperatures, inoculation contents, and holding time to find out the optimum condition. AM60 alloy was melted in the low carbon steel crucible by cylindrical electric furnace under an argon atmosphere. The melting and casting apparatus is specially designed for magnesium alloys. The grain size of AM60 magnesium alloy decreased significantly with an increase in $CaCN_2$ content and, at 0.8 wt% $CaCN_2$ or more, grain size becomes constant at about $85 {\mu}m$. The optimum condition was obtained in the 0.8 wt% $CaCN_2$ for holding molten metal of 30 min. at the temperature of $710^{\circ}C$. The tensile properties of AM60 magnesium alloys were improved due to grain refinement by addition of $CaCN_2$. In the optimum condition, the yield strength, tensile strength and elongation were ${\sigma}_{0.2}=107 MPa$, ${\sigma}_{T.S}=234 MPa$ and e=14.2%. The variation of stress with strain obeyed the relationship of the ${\sigma}=K{\varepsilon}^n$. The strain-hardening exponent, n and strength coefficient, K obtained in the 0.8 wt% $CaCN_2$ added AM 60 magnesium alloy were n=0.21 and K=390 MPa.

• Journal of the Chungcheong Mathematical Society
• /
• v.20 no.1
• /
• pp.23-29
• /
• 2007

Let X and Y be vector spaces. In this paper we prove that a mapping $f:X{\rightarrow}Y$ satisfies the following functional equation $${\large}\sum_{1{\leq}k<l{\leq}n}\;(f(x_k+x_l)+f(x_k-x_l))-2(n-1){\large}\sum_{i=1}^{n}f(x_i)=0$$ if and only if the mapping f is quadratic. In addition we investigate the generalized Hyers-Ulam-Rassias stability problem for the functional equation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.04a
• /
• pp.134-134
• /
• 2006

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.655-659
• /
• 2002

This study is performed to develop the Si$_3$N$_4$ based ceramic inserts. Si$_3$N$_4$with addition of SiC and A1$_2$O$_3$ is investigated to determine the possibility to be a new tool. The tool life of Si$_3$N$_4$ insert with more than 20wt% SiC is shorter than commercial Si$_3$N$_4$ insert during machining both heat treated SCM440 and gray cast iron. Even though SiC has higher hardness than Si$_3$N$_4$, its chemical affinity to the iron on high temperature may causes deteriorat ion of tool life. To the contrary, Si$_3$N$_4$insert with A1$_2$O$_3$ shows increase of tool life up to 300% compared to the commercial Si$_3$N$_4$insert. It may attribute to the high temperature stability of A1$_2$O$_3$. Further study will be focused on the optimization of ceramic inserts with the composition of Si$_3$N$_4$and A1$_2$O$_3$.

• Journal of the Korean Chemical Society
• /
• v.62 no.2
• /
• pp.113-117
• /
• 2018

The basic hydrogel lens with addition of N,N-dimethylacrylamide (DMA) and N-methyl-N-vinylacetamide (NMV) were manufactured. The optical and physical characteristics of ophthalmic lens were evaluated by measuring water content, oxygen permeability (Dk), refractive index and optical transmittance. The water content & oxygen permeability (Dk) of sample containing Ref., DMA group and NMV group was in the average of 34.48%, 35.54~49.19% & $13.003{\sim}18.468{\times}10^{-11}(cm^2/sec)$($mlO_2/ml{\times}mmHg$) and 36.28~44.95% & $12.270{\sim}16.883{\times}10^{-11}(cm^2/sec)$ ($mlO_2/ml{\times}mmHg$), respectively. And also, refractive index of the sample containing Ref., DMA group and NMV group was in the average of 1.4350, 1.4330~1.4131 and 1.4335~1.4195, respectively. Standard hydrogel monomer containing DMA and NMV was expected to be used usefully as a material for fabricating hydrophilic functional ophthalmic lens.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.10
• /
• pp.959-968
• /
• 2000

Direct reaction of elemental silicon with a mixture of (dichloromethyl)silanes 1 $[Cl_3-nMenSiCHCl_2:$ n = 0 (a), n = 1(b), n = 2(c), n = 3(d)] and hydrogen chloride has been studied in the presence of copper catalyst using a stirred bed reactor equ ipped with a spiral band agitator at various temperatures from $240^{\circ}C$ to $340^{\circ}C.$ Tris(si-lyl) methanes with Si-H bonds, 3a-d $[Cl_3-nMenSiCH(SiHCl_2)_2]$, and 4a-d $[Cl_3-nMenSiCH(SiHCl_2)(SiCl_3)]$, were obtained as the major products and tris(silyl)methanes having no Si-H bond, 5a-d $[Cl_3-nMenSiCH(SiCl_3)_2]$, as the minor product along with byproducts of bis(chlorosilyl)methanes, derived from the reaction of silicon with chloromethylsilane formed by the decomposition of 1. In addition to those products, trichlorosilane and tetra-chlorosilane were produced by the reaction of elemental silicon with hydrogen chloride. The decomposition of 1 was suppressed and the production of polymeric carbosilanes reduced by adding hydrogen chloride to 1. Cad-mium was a good promoter for and the optimum temperature for this direct synthesis was $280^{\circ}C$.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.245-248
• /
• 2014

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.791-796
• /
• 2020

Nuclear fusion seems to be a good choice of energy source in the future. Nickel is one of the crucial structural materials for fusion devices. In this work, the cross section data of ⁵⁸Ni(n,p)⁵⁸Co, ⁶⁰Ni(n,p)⁶⁰Co, ⁶¹Ni(n,p)⁶¹Co, ⁶²Ni(n,p)⁶²Co and ⁶⁴Ni(n,p)⁶⁴Co reactions were calculated using the nuclear codes ALICE/ASH, EMPIRE 3.2 and TALYS 1.8. In addition, the cross sections were calculated with the empirical formulas obtained in our previous paper at 14-15 MeV. The obtained results were compared with the measured values in the literature, and with the evaluated data files (JEFF-3.3, TENDL-2017, ENDF/B-VIII.0).