• KSBB Journal
• /
• 제29권2호
• /
• pp.118-123
• /
• 2014

It was confirmed that malodor connected with an air-conditioner in an automobile is caused by microbial volatile organic compounds (MVOCs) produced by microorganisms getting into an air-conditioner when it is operating. Chemicals such as hydrogen sulfide, dimethyl sulfide, nbutyric acid, n-valeric acid, iso-valeric acid, n-octanol and toluene were detected above the odor threshold inside the automobile. The characteristics of a funky odor in the air blown into the automobile were due to detected sulfur compounds (hydrogen sulfide and dimethyl sulfide). Dimethyl sulfide was produced by microorganisms such as Aspergillus versicolor, Methylobacterium aquaticum, Herbaspirillum sp. and Acidovorax sp. In addition, the characteristics of a sour odor in the air blown into the automobile were due to detected organic acids (n-butyric acid, n-valeric acid and iso-valeric acid). N-valeric acid and iso-valeric acid were generated from Aspergillus versicolor, while iso-valeric acid was produced by Methylobacterium aquaticum. In addition, the odor intensity of the air blown into the automobile was affected by the concentration of detected sulfur compounds and organic acids. On the other hand, it is estimated that chemicals such as hydrogen sulfide, n-octanol and n-butyric acid detected in the air blown into the automobile were produced by non-identified species of microorganisms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.79-83
• /
• 2001

In order to compare the barrier properties of Ta-N/Si(001) with those of Ta-N/Ta/Si(001), we studied structural properties of films grown by RF magnetron sputtering with various $Ar/N_2$ ratios. To evaluate the barrier properties, the samples were annealed in a vacuum chamber. Ex-situ x-ray scattering measurements were done using an in-house x-ray system. With increasing nitrogen ratio in Ta-N/Si(001), the barrier property of Ta-N/Si(001) was enhanced, finally failed at $750^{\circ}C$ due to the crystallization and silicide formation. Compared with Ta-N/Si(001), Ta-N/Ta/Si(001) forms silicides at $650^{\circ}C$. However it does not crystallize even at $750^{\circ}C$. With increasing nitrogen composition in Ta-N/Ta/Si(001), the formation of tantalum silicide was reduced and the surface roughness was improved. To observe the surface morphology of Ta-N/Ta/Si(001) during annealing, we performed an in-situ x-ray scattering experiment using synchrotron radiation of the 5C2 at Pohang Light Source(PLS). Addition of Ta layer between Ta-N and Si(001) improved the surface morphology and reduced the surface degradation at high temperatures. In addition, increasing $N_2/Ar$ flow ratio reduced the formation of tantalum silicide and enhanced the barrier properties.

• 한국환경과학회지
• /
• 제16권4호
• /
• pp.393-397
• /
• 2007

The sonolytic decomposition of NHCs(Nitrogen Heterocyclic Compounds), such as atrazine[6-chloro-N-ethyl-N'-(1-methylethyl)-1,3,5-triazine-2,4-diamine], simazine(6-chloro-N,N'-diethyl-1,3,5-triazine-2,4-diamine), trietazine(6-chloro-N,N,N'-triethyl-1,3, 5-triazine-2,4-diamine), in water was investigated at a ultrasound frequency of 200kHz with an acoustic intensity of 200W under argon and air atmospheres. The concentration of NHCs decreased with irradiation, indicating pseudo-first-order kinetics. The rates were in the range $1.06{\sim}2.07({\times}10^{-2}min^{-1})$ under air and $1.30{\sim}2.59({\times}10^{-2}min^{-1})$ under argon at a concentration of $200{\mu}M$ of NHCs. The rate of hydroxyl radicals(${\bullet}{OH}$) formation from water is $19.8{\mu}M\;min^{-1}$ under argon and $14.7{\mu}M\;min^{-1}$ under air in the same sonolysis conditions. The sonolysis of NHCs is effectively inhibited, but not completely, by the addition of t-BuOH(2-methyl-2-propanol), which is known to be an efficient ${\bullet}{OH}$ radical scavenger in aqueous sonolysis. This suggests that the main decomposition of NHCs proceeds via reaction with ${\bullet}{OH}$ radical; a thermal reaction also occurs, although its contribution is small. The addition of appropriate amounts of Fenton's reagent $[Fe^{2+}]$ accelerates the decomposition. This is probably due to the regeneration of ${\bullet}{OH}$ radicals from hydrogen peroxide, which would be formed from recombination of ${\bullet}{OH}$ radicals and which may contribute a little to the decomposition.

• 한국식품영양과학회지
• /
• 제24권2호
• /
• pp.219-227
• /
• 1995

Natto is a Japanese tradiational food made from whole soybeans by the fermentation of Bacillus natto. This study was attempted to improve the taste of Natto, garlic(2%) and red pepper oleoresin(0.2%) were added. Conventional Natto(N-1), garlic Natto(N-2), red pepper oleoresin Natto(N-3), garlic and red pepper oleoresin Natto(N-4) were prepared. Volatile flavor components, fatty acid, organic acid, pH and titratable acdity in all samples were investigated. The experimental results revealed the presence of 62 volatile components in conventional Natto. Among there, the major flavor compounds were identified to be 2, 5-dimethylpyrazine, trimethyl-pyrazine, 2, 6-bis91, 1-dimethylethyl) phenol. Seventy-one volatile compounds were detected in N-2, and major compounds were identified to be methyl-2-propenyl disulfide, 2, 6-bis(1, 1-dimethylethyl)phenol and 2, 5-dimethylpyrazine. The amounts of volatile compounds, 2-methyoxyphenol and 1, 2-benzenedicarboxylic acid increased by addition of garlic, where as, 1,2 -propanediol, 1-hexanol and 2, 5-dimethylpyrazine decreased. The compounds, 4, 5-dihydroxy-5-propyl-1H-pyrazole, 1, 1, 3-trimethylcyclopentane were identified in N-3. The compounds, such as trimethylpyrazine, 3-ethyl-2,5-dimethylpyrazine increased by addition of red pepper oleoresin, whereas 1,2-propanediol, 1-hexanol and 2,5-dimethylpyrazine decreased. Fatty acid compositions were mainly consisted of linoleic acid(43.66~55.89%) and followed by oleic, palmitic, linolenic, stearic, arachidic, myristic acid. The organic acids we4re identified to be citric(28.2~30.6), acetic(50.0~73.3) and pyroglutamic acid(2.1~3.7).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.33-35
• /
• 2011

Films of CrAlN and CrZrN were deposited on a steel substrate by closed field unbalanced magnetron sputtering, and their oxidation behaviors were investigated. CrAlN films consisted of dense, polycrystalline CrN and AlN fine columns. The formed oxides consisted primarily of crystalline $Cr_2O_3$ incorporated with $Al_2O_3$. The oxide layers were thin and compact so as to make CrAlN films more protective than CrN films. In case of CrZrN films, Zr atoms were dissolved in the CrN phase. Zr atoms advantageously refined the columnar structure, reduced the surface roughness, and increased the micro-hardness. However, the addition of Zr did not increased oxidation resistance, mainly because Zr was not a protective element. All the deposited films displayed relatively good oxidation resistance, owing to the formation of the highly protective $Cr_2O_3$ on their surface. The $Cr_{40}Zr_9N$ and $Cr_{31}Zr_{16}N$ films oxidized to $Cr_2O_3$ as the major phase and ${\alpha}-ZrO_2$ as the minor one, whereas the CrN film oxidized to $Cr_2O_3$.

• 한국음향학회지
• /
• 제26권5호
• /
• pp.214-219
• /
• 2007

본 논문은 MPEG-2 AAC(Advanced Audio Boding) 디코더에 필요한 IMDCT(Inverse Modified Discrete Cosine Transform)를 고속으로 처리하기 위한 새로운 IFFT(Inverse Fast Fourier Transform) 구현 방식을 제안한다. 기존 방식 중에서 $2^n$(N-point) type IMDCT가 성능이 가장 우수하지만 많은 계산을 요구하는 N/4-point complex IFFT 과정을 포함하고 있다. 본 연구는 $2^n$(N-point) type IMDCT에 포함된 N/4-point complex IFFT의 연산량을 줄이는 방법을 고안하였다. N/4-point complex IFFT는 입력 데이터를 bit-reverse 방식을 사용하여 정렬하지만 본 연구에서는 새로운 입력 데이터 정렬방식과 $N/4^{n+1}$ 형태의 IFFT 고안하여 곱셈, 덧셈, ROM 용량을 줄였다.

• 생태와환경
• /
• 제46권2호
• /
• pp.276-288
• /
• 2013

본 연구는 질소 시비에 의해 증가된 토양 질소가 식물의 성장 및 식물체의 화학적 조성에 미치는 영향과 이로 인한 분해에서의 변화를 확인하고자 야외성장실험과 분해실험을 진행하였다. 온실에서 질소 시비구와 비시구 토양에 각각 벼를 재배하였으며 식물이 성숙한 뒤 수확하여 C, N, lignin, cellulose 함량을 측정하였다. 대조구와 질소 처리구 토양에서 재배된 식물의 개체 당 평균 건중량은 각각 0.70 g, 1.32 g로 질소 시비에 의해 1.9배 증가하였다. 식물체의 N 및 C 함량은 질소 시비에 의해 증가하였고 lignin, C/N, lignin/N, cellulose/N은 감소하였다. 이후, 수확된 식물의 지상부는 microcosm 분해실험에 이용되었으며, 분해 식물체에서 건중량의 변화, microbial biomass C와 microbial biomass N, 그리고 dehydrogenase와 urease 활성을 측정하고, 분해과정 중 발생하는 $CO_2$의 양을 정량하였다. 대조구 토양에서 분해시킨 대조구 식물체와 질소 처리구 식물체, 그리고 질소를 처리한 토양에서 분해시킨 질소 처리구 식물체의 잔존량은 각각 초기 건중량의 53.0%, 47.1%, 53.6%를 나타내었다. 질소 시비는 식물체에서 N 함량을 높이고 C/N 및 lignin/N을 낮추어 식물체의 분해를 촉진하였으나, 분해 과정에서의 토양 질소처리는 분해를 억제하였다. 질소 시비에 의해 토양에서 microbial biomass C와 dehydrogenase 활성은 감소하였고, 반면에 microbial biomass N과 urease 활성은 증가하였다. 분해 중 발생한 $CO_2$의 양은 30일 이후부터 질소 시비에 의해 감소하였다. 분해 식물체에서 측정된 microbial biomass C는 질소 처리에 의해 초기에 증가하였으나 이후 저해되는 양상을 나타냈으며 microbial biomass N은 유의한 차이를 보이지 않았다. 질소 시비에 의해 분해 식물체에서 dehydrogenase 활성은 저해되었으며 urease는 분해 초기에 가장 높은 활성을 보였으나 분해 후기에 현저한 감소를 나타냈다. 본 실험에서 질소 시비는 식물의 성장을 증가시키고 식물체의 N 함량을 높여 화학적 조성의 변화를 일으키며 분해율을 증가시키나 분해 단계에서 질소의 시비는 미생물의 활성을 억제시켜 분해를 저해하는 결과를 나타내었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.133-138
• /
• 2001

In this study, quantitative nitric oxide concentration distributions are investigated in the laminar nonpremixed $H_2/N_2$ flames by laser-induced fluorescence (LIF). The measurements are taken in flames for different $N_2$ dilution ratios varying from 20${\sim}$80%, and fuel now rate is fixed as lslpm. The NO A-X (0,0) vibrational band around 226 nm is excited using a XeCl excimer-pumped dye laser. We applied same excitation line used in $CH_4$ premixed flame. Overall, NO concentration was rapidly decreased with $N_2$ addition and we could not measure the concentration any longer for $N_2$ dilution above 80%.

• 한국세라믹학회지
• /
• 제28권8호
• /
• pp.647-653
• /
• 1991

In order to synthesize fine AlN powder by the direct nitridation of Aluminum metal power added LiF and BaF2 as additives was heated at 150$0^{\circ}C$ for 3 hrs. in nitrogen gas with flow rate of 20 mι/sec. Additives are promoted the nitridation by prevented the aggromerate of powders when 3% LiF and 2% BaF2 were added to Al metal powder. Rate of nitridation was about 100% and average size of AlN powders were very fine such as 0.3 ${\mu}{\textrm}{m}$. Specific surface area of synthesized AlN powder was 3.95$m^2$/g and also O2 and N2 contents were 2.595% and 33.25%, respectively.

• 폴리머
• /
• 제36권6호
• /
• pp.822-830
• /
• 2012

본 연구에서는 실리카 나노입자를 우수한 내가수분해성을 가지는 dipodal 형태의 bis[3-(trimethoxysilyl)propyl]amine(BTMA) 실란 커플링제로 표면 개질한 후, 실리카에 도입된 BTMA의 2차 아미노기인 N-H기와 마이클 부가반응이 가능한 acrylate기를 1분자당 2개씩 가지는 poly(ethylene glycol)diacrylate(PEGDA)로 표면 처리하여 acrylate기를 실리카 입자 표면에 도입하는 연구를 수행하였다. PEGDA의 몰수 및 3가지 서로 다른 분자량의 PEGDA(M.W. 258, 575, 700) 처리가 실리카 표면에 도입되는 acrylate기의 구조에 미치는 영향을 fourier transform infrared spectroscopy(FTIR), elemental analysis(EA, 원소분석) 및 고체 상태 $^{13}C$ cross-polarization magic angle spinning(CP/MAS) nuclear magnetic resonance spectroscopy(NMR)법을 사용하여 분석하였다. 액체상태의 순수 PEGDA와 순수 BTMA를 같은 몰 비로 반응시키면 PEGDA 1분자당 2개씩 존재하는 acrylate기 중 1개 acrylate기는 순수 BTMA의 N-H기와 1:1의 비율로 마이클 부가반응이 일어나 ${\beta}$-amino acid ester를 형성하고, 나머지 1개의 acrylate기는 남아서 중합반응이 가능한 단량체 합성이 가능하다. 하지만, BTMA로 개질된 실리카 입자를 PEGDA와 반응시키면, PEGDA 1분자당 2개씩 결합있는 acrylate기 대부분이 실리카 입자에 결합되어 있는 BTMA의 N-H기와 마이클 부가반응으로 ${\beta}$-amino acid ester를 형성하여, acrylate기의 C=C기 대부분이 C-C로 변화함을 확인하였다.