• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.57-64
• /
• 2006

Multiprocessor system on chip (MPSoC) platforms has set a new innovative trend for the SoC design. Quality of service parameters and performance matrix are leading to the adoption of new design methodology for SoC, which will incorporate highly scalable, reusable, predictable, cost and energy efficient platform not only for underlying communication backbone but also for the entire system architecture of NOC. Like the layered architecture for the communication backbone of NOC, we have proposed the entire system architecture for NOC to be a seven layered architecture in itself. Such a platform can separate the domain specific issues which will model concurrency along with the synchronization issues more effectively. For such a layered architecture, model of computation will provide a framework to that can model concurrency and synchronization issues which are natural for any application. Therefore it becomes extremely important to use a right computation model in a specific NOC region.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.869-872
• /
• 2005

In this paper we present a switch wrapper for an AMBA AXI, which is an efficient on-chip-network interface compared to bus-based interfaces in a multiprocessor SoC. The AXI uses an idea of NoC to provide the increasing demands on communication bandwidth within a single chip. A switch wrapper for AXI is located between a interconnection network and two IPs connecting them together. It carries out a mode of routing to interconnection network and executes protocol conversions to provide compatibility in IP reuse. A switch wrapper consists of a direct router, AHB-AXI converters, interface modules and a controller modules. We propose the design of a all-in-one type switch wrapper.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.699-708
• /
• 2006

Bus splitting technique reduces bus energy by placing modules with frequent communications closely and using necessary bus segments in communications. But, previous bus splitting techniques can not be used in MPSoC platform, because it uses cache coherency protocol and all processors should be able to see the bus transactions. In this paper, we propose a bus splitting technique for MPSoC platform to reduce bus energy. The proposed technique divides a bus into several bus segments, some for private memory and others for shared memory. So, it minimizes the bus energy consumed in private memory accesses without producing cache coherency problem. We also propose a task allocation technique considering cache coherency protocol. It allocates tasks into processors according to the numbers of bus transactions and cache coherence protocol, and reduces the bus energy consumption during shared memory references. The experimental results from simulations say the bus splitting technique reduces maximal 83% of the bus energy consumption by private memory accesses. Also they show the task allocation technique reduces maximal 30% of bus energy consumed in shared memory references. We can expect the bus splitting technique and the task allocation technique can be used in multiprocessor platforms to reduce bus energy without interference with cache coherency protocol.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.471-482
• /
• 2021

Several code-division multiple access (CDMA)-based interconnect schemes have been recently proposed as alternatives to the conventional time-division multiplexing bus in multicore systems-on-chip. CDMA systems with a dynamic assignment of spreading codewords are particularly attractive because of their potential for higher bandwidth efficiency compared with the systems in which the codewords are statically assigned to processing elements. In this paper, we propose a novel distributed arbitration scheme for dynamic CDMA-bus-based systems, which solves the complexity and scalability issues associated with commonly used centralized arbitration schemes. The proposed arbitration unit is decomposed into multiple simple arbitration elements, which are connected in a ring. The arbitration ring implements a token-passing algorithm, which both resolves destination conflicts and assigns the codewords to processing elements. Simulation results show that the throughput reduction in an optimally configured dynamic CDMA bus due to arbitration-related overheads does not exceed 5%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.114-123
• /
• 1985

This is the second part of the four-part paper describing the development of a packet-switched computer network named the cORNET In this paper, following the first par paper that describes the concepts of the KORNET and the development of the network management center (NMC), wc present the design of the KORNET and the development of the network node processor (NNP) The initial configuration of the KORNET consists of three NNP's and one NMC. We have developed each NNP as a microprocessor-based (Mc68000) multiprocessor system, and implemented the NMC using a super-mini computer (Mv/8000) For the KORNET we use the virtual circuit (VC) method as the packet service strategy and the distributed adaptive routing algorithm to adapt efficiently the variation of node and link status. Also, we use a dynamic buffer management algorithm for efficient storage management. Thc hardware of the NNP system has been designed with emphasis on modularity so that it may be expanded esily . Also, the software of the NNP system has been developed according to the CCITT recommendations X.25, X.3, X.28 and X.29.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.68-75
• /
• 2016

As the number of cores and IPs increase in multiprocessor system-on-chip (MPSoC), network-on-chip (NoC) has emerged as a promising novel interconnection architecture for its parallelism and scalability. However, minimization of the latency in NoC with legacy bus IPs must be addressed. In this paper, we focus on the latency minimization problem in NoC which accommodates legacy bus protocol based IPs considering the trade-offs between hop counts and path collisions. To resolve this problem, we propose separated address/data network for independent address and data phases of bus protocol. Compared to Mesh and irregular topologies generated by TopGen, experimental results show that average latency and execution time are reduced by 19.46% and 10.55%, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.86-92
• /
• 2011

In this paper, we propose a novel hardware MPI(Message Passing Interface) unit which supports message passing in multiprocessor system which use distributed memory architecture. MPI Hardware unit processes data synchronization, transmission and completion, and it supports processor non-blocking operation so it reduces overhead according to synchronization. Additionally, MPI hardware unit combines ready entry, request entry, reserve entry which save and manage the synchronized messages and performs the multiple outstanding issue and out of order completion. According to BFM(Bus Functional Model) simulation result, the performance is increased by 25% on many to many communication. After we designed MPI unit using HDL, with synopsys design compiler we synthesized, and for synthesis library we used MagnaChip $0.18{\mu}m$. And then we making prototype chip. The proposed message transmission interface hardware shows high performance for its increase in size. Thus, as we consider low-cost design and scalability, MPI hardware unit is useful in increasing overall performance of embedded MPSoC(Multi-Processor System-on-Chip).

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.227-235
• /
• 1993

In this paper, the development of a high performance flexible controller is described. The hardware of the controller, based on VME-bus, consists of four M68020 single-board computers (32-bit) with M68881 numerical coprocessors, two M68040 single board donputers, I/O devices (such as A/D and D/A converters, paraller I/O, encoder counters), and bus-to-bus adaptor. This software, written in C and based on X-window environment with Unix operating system, includes : text editor, compiler, downloader, and plotter running in a host computer for developing control program ; device drivers, scheduler, and mathemetical routines for the real time control purpose ; message passing, file server, source level debugger virtural terminal, etc. The hardware and software are structured so that the controller might have both flexibility and extensibility. In papallel to the controller, a three degrees of freedom kinematically redundant robot has been developed at the same time. The development of the same time. The development of the robot was undertaken in order to provide, on the one hand, a computationally intensive plant to which to apply the controller, and on the other hand a research tool in the field of kinematically redundant manipulator, which is, as such, an important area. By using the controller, dynamic control of the redundant manipulator was successfully experimented, showing the effectiveness and flexibility of the controller.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.49-55
• /
• 2007

To improved the multi-resolution fast hierarchical motion estimation by using de-interlacing algorithm that is effective in term of both performance and VLSI implementation, is proposed so as to cover large search area field-based as well as frame based image processing in SoC design. In this paper, we have simulated a various picture mode M=2 or M=3. As a results, the proposed algorithm achieved the motion estimation performance PSNR compare with the full search block matching algorithm, the average performance degradation reached to -0.7dB, which did not affect on the subjective quality of reconstructed images at all. And acquiring the more desirable to adopt design SoC for the fast hierarchical motion estimation, we exploit foreground and background search algorithm (FBSA) base on the dual arithmetic processor element(DAPE). It is possible to estimate the large search area motion displacement using a half of number PE in general operation methods. And the proposed architecture of MHME improve the VLSI design hardware through the proposed FBSA structure with DAPE to remove the local memory. The proposed FBSA which use bit array processing in search area can improve structure as like multiple processor array unit(MPAU).