• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.102-108
• /
• 2013

In manufacturing of solution-processed organic electronic devices, a spin coating method is frequently used, but which has a big problem. Solvent in a solution has a decisive effect such as physical and chemical damage for successive solution-based film deposition. Such a severe damage by solvent restricts for fabricating building blocks of multi-layered films from solutions. In this work, it will be shown that a proper combination of well-known solvents gives a chance to fabricate multi-layered film, also this new method was applied to make organic field effect transistor. Two types of bottom gate, bottom contact transistors were fabricated, one of which is fabricated by conventional single spin coating method, the other fabricated by double spin coating method. Compared with the electrical characteristics in a single spin coated transistor, the leakage current between source and gate electrode was decreased, ON state current was increased, and the extracted saturation mobility was multiplied more than 2.7 time for double spin coated transistors. It is suggested that the multiple coated gate dielectric structure is more desirable for high performance organic ferroelectric field effect transistors.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.33-38
• /
• 2001

We investigate the via-size dependance of as-electroplated- and reflow-bump shapes for realizing both high-density and high-aspect ratio of solder bump. The solder bump is fabricated by subsequent processes as follows. After sputtering a TiW/Al electrode on a 5-inch Si-wafer, a thick photoresist for via formation it obtained by multiple-codling method and then vias with various diameters are defined by a conventional photolithography technique using a contact alinger with an I-line source. After via formation the under ball metallurgy (UBM) structure with Ti-adhesion and Cu-seed layers is sputtered on a sample. Cu-layer and Sn/pb-layer with a competition ratio of 6 to 4 are electroplated by a selective electroplating method. The reflow-bump diameters at bottom are unchanged, compared with as-electroplated diameters. As-electroplated- and reflow-bump shapes, however, depend significantly on the via size. The heights of as-electroplated and reflow bumps increase with the larger cia, while the aspect ratio of bump decreases. The nearest bumps may be touched by decreasing the bump pitch in order to obtain high-density bump. The touching between the nearest bumps occurs during the overplating procedure rather than the reflowing procedure because the mushroom diameter formed by overplating is larger than the reflow-bump diameter. The arrangement as zig-zag rows can be effective for realizing the flip-chip-interconnect bump with both high-density and high-aspect ratio.

• Clean Technology
• /
• v.17 no.2
• /
• pp.134-141
• /
• 2011

The effects of the compounds and concentrations of nitrogenous electron acceptor, the ratio of electron donor/electron acceptor (C/N), and the complexity of electron donor on the emission of $N_2O$ during wastewater denitrification were quantitatively investigated in this study. The higher ${NO_3}^-$ and ${NO_2}^-$ concentrations, the more $N_2O$ emission was observed. ${NO_2}^-$ has strong effect on $N_2O$ emission as it emitted morc $N_2O$ than ${NO_3}^-$, 50 mg/L of ${NO_2}^-$-N gave the highest conversion (9.3%) and yield (9.8%) of $N_2O$ while ${NO_3}^-$-N (50 mg/L) gave 5.6% conversion and 11.0% yield. Lower C/N ratio decreases nitrogen removal efficiency, but it increases the conversion of $N_2O$ because of the incomplete denitrification by the limited organic carbon. When real domestic wastewater is used as the electron donor of the denitrification, $N_2O$ emission is reduced to 1/10 of the emission when single carbon (acetate) is used. It is thought that multiple carbon source utilizes many denitrification pathways and it seems to be helpful for the reduction of $N_2O$ emission.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.2
• /
• pp.45-60
• /
• 2010

The purpose of this study was to analyze the effect of knowledge and perception of environmental problems on pro-environmental behavior of youth. The data used for this study were collected using questionnaire. The sample for this study consisted of 654 junior and high school students living in Seoul and Gyeong-gi Province. Descriptive statistics and multiple regression analysis were used to analyze the data. The following is a summary of the major findings. (1) The significant variables affecting pro-environmental behavior of youth were need of environmental education, source of environmental knowledge, level of perception on air pollution and scarcity of resources and energy, sex and total amount of allowance of students. These variables explained 20.5% of variance of pro-environmental behavior. (2) Environmental education related variables were the best predictor of pro-environmental behavior; knowledge of environmental problem variables had limited predictive power. (3) Recommendations for teaching-learning strategies have been suggested to enhance youth's pro-environmental behavior in school.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.332-340
• /
• 2017

This study aims to propose a new optimization-based approach for design and analysis of the stand-alone hybrid energy supply system using renewable energy sources (RES). In the energy supply system, we include multiple energy production technologies such as Photovoltaics (PV), Wind turbine, and fossil-fuel-based AC generator along with different types of energy storage and conversion technologies such as battery and inverter. We then select six different regions of Korea to represent various characteristics of different RES potentials and demand profiles. We finally designed and analyzed the optimal RES stand-alone energy supply system in the selected regions using multiobjective optimization (MOOP) technique, which includes two objective functions: the minimum cost and the minimum $CO_2$ emission. In addition, we discussed the feasibility and expecting benefits of the systems by comparing to conventional systems of Korea. As a result, the region of the highest RES potential showed the possibility to remarkably reduce $CO_2$ emissions compared to the conventional system. Besides, the levelized cost of electricity (LCOE) of the RES-based energy system is identified to be slightly higher than conventional energy system: 0.35 and 0.46 $/kWh, respectively. However, the total life-cycle emission of $CO_2$ ($LCE_{CO2}$) can be reduced up to 470 g$CO_2$/kWh from 490 g$CO_2$/kWh of the conventional systems.

• Korea Journal of Hospital Management
• /
• v.16 no.3
• /
• pp.92-114
• /
• 2011

The study has its purpose on providing basic resource to enforce the capability of the middle managers by examining the level of performance and the level of awareness about the capabilities of the managers and by understanding the significance of the difference and the reasons for the differences. The source of the study was 195 survey questionnaires that were carried out to the managers of the 9 general hospitals and the method of the analysis was the frequency analysis, analysis of the credibility, matching to sample T-test, independent sample T-test, dispersion analysis, correlation analysis, and multiple linear regression analysis using accumulated variables. The followings are the main result of the study. First, the difference between the level of awareness about the capabilities and the level of performance of the mediator managers in general hospitals had high capability in change management. The following orders were: competence in achievement and behavior, competence in management, competence in recognition, competence in influence, competence in individual effectiveness, and competence in personal relationship service. Second, as the result of the relation analysis in order to understand the correlation between awareness and performance of the mediator managers, everything had significant positive correlation. In the study about the level of importance, the cognitive capability and the management capability had the highest correlation with the correlation number of 0.88. In the study about the level of performance, the cognitive capability, individual capability, and the management capability had the highest correlation with the correlation variable number of 0.79. Third, as the result of studying the reason for the difference between the level of the awareness capability and the level of the performance, lack of the support recognition compensation in the organization level, inappropriate work environment, limit in the regulation were found as the highest reason in the order. As the result of the study, it was concluded that the creation of the efficient capability estimation model and the securement of the system that estimate the capability of the managers should be carried out in order to enforce the capability of the mediator managers in general hospitals.

• Journal of The Korean Astronomical Society
• /
• v.49 no.1
• /
• pp.25-35
• /
• 2016

Multiple color selection techniques are successful in identifying quasars from wide-field broadband imaging survey data. Among the quasars that have been discovered so far, however, there is a redshift gap at 5 ≲ z ≲ 5.7 due to the limitations of filter sets in previous studies. In this work, we present a new selection technique of high redshift quasars using a sequence of medium-band filters: nine filters with central wavelengths from 625 to 1025 nm and bandwidths of 50 nm. Photometry with these medium-bands traces the spectral energy distribution (SED) of a source, similar to spectroscopy with resolution R ~ 15. By conducting medium-band observations of high redshift quasars at 4.7 ≤ z ≤ 6.0 and brown dwarfs (the main contaminants in high redshift quasar selection) using the SED camera for QUasars in EArly uNiverse (SQUEAN) on the 2.1-m telescope at the McDonald Observatory, we show that these medium-band filters are superior to multi-color broad-band color section in separating high redshift quasars from brown dwarfs. In addition, we show that redshifts of high redshift quasars can be determined to an accuracy of Δz/(1 + z) = 0.002 - 0.026. The selection technique can be extended to z ~ 7, suggesting that the medium-band observation can be powerful in identifying quasars even at the re-ionization epoch.

• Clinical and Experimental Pediatrics
• /
• v.52 no.1
• /
• pp.68-74
• /
• 2009

Purpose : We assessed about the measles elimination in Korea according to analyzing national data on measles cases for 2002-2007. Methods : We estimated the effective reproduction number according to the proportion of imported cases and outbreak size. Results : Eleven cases, thirteen cases, six cases, six cases, 25 cases (60.0% were linked to 1 outbreak of 15 cases), and 180 cases (55.6% were linked 11 outbreaks of 2, 2, 2, 3, 3, 3, 5, 9, 9, 12, 50 cases) were reported in 2002, 2003, 2004, 2005, 2006 and 2007, respectively. In 2002-2007, R is 0.95 by imported case and 0.43 by outbreak sizes. In 2007, multiple chains of transmission occurred in hospital. Most of cases were below 4 ages and unvaccinated. We didn't find most of the infection source. Conclusion : We should prevent outbreak of susceptibility pocket like nosocomial infection, conduct reliable routine surveillance and epidemiological investigation to solve a problem of the measles elimination.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.2
• /
• pp.157-165
• /
• 2001

Objectives : To identify the risk factors of cerebrovascular disorders(CVD) in Koreans using a nested case-control study. Methods : The cohort consisted of beneficiaries who had taken health examinations of the Korea Medical Insurance Corporation (KMIC cohort: 115,600 persons) in 1990 and 1992 consecutively. Four hundred and twenty five (425) cases were selected following the validation of diagnosis among 2,026 reported CVD (160-168) inpatients during the year from 1993 to 1997. Controls were matched (1:1) with age and gender of the cases among inpatients without CVD during the same period. The source of data in this study were the files of the 1990 health examinations and the 1992 health questionnaires, as well as an additional telephone survey undertaken from March to November 1999. Results : In a bivariate analysis and multiple logistic regression analysis, risk factors for total CVD were hyperglycemia and hypertension. Unrespectively, the odds ratio of ex-smoker was significantly lower than that of those who had never smoked. The risk factors for ischemic CVD also were hyperglycemia and hypertension. However, only blood pressure was found to be a risk factor for hemorrhagic CVD. Hypercholesterolemia was not a risk factor for total CVD, ischemic CVD, and hemorrhagic CVD. Conclusion : We concluded that the most important risk factor for CVD (including subtype) in Koreans was hypertension.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1507-1516
• /
• 2002

Meat and bone meal is a valuable protein and mineral source in diets of production animals and contributes to the protein, energy and mineral component of diets. The aim of the present study was to more accurately characterise the apparent ileal amino acid digestibility of meat and bone meals produced in New Zealand and evaluate routine in vitro assays used in practise to measure meat and bone meal quality. A total of 94 commercial meat and bone meals from 25 New Zealand rendering plants over a two and a half year period were analysed for proximates, gross energy, gross amino acid content (incl. hydroxyproline, hydroxylysine and lanthionine), apparent ileal amino acid digestibility, pepsin nitrogen digestibility, protein solubility and bone content. The mean crude protein content of the 94 meat and bone meal samples was 56.8% with a range of >35% units and a coefficient of variation of 9.8%. The mean crude fat and ash content were 10.0 and 28.4% respectively. These latter components showed a large range (16 and 43%, respectively) with coefficients of variation above 22%. Amino acid digestibility between samples was highly variable with lysine and sulphur amino acids digestibility ranging between 45.8-89.0 and 38.2-85.5%, respectively. Pearson correlation coefficients are presented between crude protein content and individual gross amino acids, crude protein content and individual digestible amino acid content, and pepsin N digestibility and individual digestible amino acid content. There was a significant relationship between the digestible amino acid nitrogen content and the crude protein content while pepsin nitrogen digestibility was not correlated to ileal amino acid nitrogen digestibility (r=-0.06). Meat meals with a high protein content had relatively low hydroxyproline and hydroxylysine levels something that was attributed to the levels of collagen from bone. The data indicated that lanthionine (formed upon heat treatment of cysteine with a hydroprotein) is not a good indicator of the heat treatment employed to meat and bone meals. Step-wise multiple regression equations to predict the apparent digestible content of amino acids from rapid in vitro assays are presented. The most selected variables included ash and crude fat content. In general the equations derived for the essential amino acids had a higher degrees of fit (R2) compared to the non-essential amino acids. The R2 for the essential amino acids ranged from 0.43 for histidine and 0.68 for leucine. These equations provide a means of more rapidly estimating the apparent ileal digestible amino acid content (protein quality) of meat and bone meal using standard analyses.