• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.222-231
• /
• 2017

In this paper, a new architecture for a cost-effective power conditioning systems (PCS) using a single-sourced asymmetric cascaded H-bridge multilevel inverter (MLI) for photovoltaic (PV) applications is proposed. The asymmetric MLI topology has a reduced number of parts compared to the symmetrical type for the same number of voltage level. However, the modulation index threshold related to the drop in the number of levels of the inverter output is higher than that of the symmetrical MLI. This problem results in a modulation index limitation which is relatively higher than that of the symmetrical MLI. Hence, an extra voltage pre-regulator becomes a necessary component in the PCS under a wide operating bias variation. In addition to pre-stage voltage regulation for the constant MLI dc-links, another auxiliary pre-regulator should provide isolation and voltage balance among the multiple H-bridge cells in the asymmetrical MLI as well as the symmetrical ones. The proposed PCS uses a single-ended DC-DC converter topology with a coupled inductor and charge-pump circuit to satisfy all of the aforementioned requirements. Since the proposed integrated-type voltage pre-regulator circuit uses only a single MOSFET switch and a single magnetic component, the size and cost of the PCS is an optimal trade-off. In addition, the voltage balance between the separate H-bridge cells is automatically maintained by the number of turns in the coupled inductor transformer regardless of the duty cycle, which eliminates the need for an extra voltage regulator for the auxiliary H-bridge in MLIs. The voltage balance is also maintained under the discontinuous conduction mode (DCM). Thus, the PCS is also operational during light load conditions. The proposed architecture can apply the module-integrated converter (MIC) concept to perform distributed MPPT. The proposed architecture is analyzed and verified for a 7-level asymmetric MLI, using simulation results and a hardware implementation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.101-108
• /
• 2017

As the quantum gate matrix is a $r^{n+1}{\times}r^{n+1}$ dimension when the radix is r, the number of control state vectors is n, and the number of target state vectors is one, the matrix dimension with increasing n is exponentially increasing. If the number of control state vectors is $2^n$, then the number of $2^n-1$ unit matrix operations preserves the output from the input, and only one can be performed the unitary operation to the target state vector. Therefore, this paper proposes a new method of function embedding that can replace $2^n-1$ times of unit matrix operations with deterministic contribution to matrix dimension by arithmetic power switch of the unitary gate. The proposed function embedding method uses a binary literal switch with a multivalued threshold, so that a general purpose hybrid MCU gate can be realized in a $r{\times}r$ unitary matrix.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5835-5854
• /
• 2017

The implementation of IEEE 802.15.6 in Wireless Body Area Network (WBAN) is contention based. Meanwhile, IEEE 802.15.4 MAC provides limited 16 channels in the Superframe structure, making it unfit for N heterogeneous nature of patient's data. Also, the Beacon-enabled Carrier-Sense Multiple Access/Collision-Avoidance (CSMA/CA) scheduling access scheme in WBAN, allocates Contention-free Period (CAP) channels to emergency and non-emergency Biomedical Sensors (BMSs) using contention mechanism, increasing repetition in rounds. This reduces performance of the MAC protocol causing higher data collisions and delay, low data reliability, BMSs packet retransmissions and increased energy consumption. Moreover, it has no traffic differentiation method. This paper proposes a Low-delay Traffic-Aware Medium Access Control (LTA-MAC) protocol to provide sufficient channels with a higher bandwidth, and allocates them individually to non-emergency and emergency data. Also, a Contention Differentiated Adaptive Slot Allocation CSMA-CA (CDASA-CSMA/CA) for scheduling access scheme is proposed to reduce repetition in rounds, and assists in channels allocation to BMSs. Furthermore, an On-demand (OD) slot in the LTA-MAC to resolve the patient's data drops in the CSMA/CA scheme due to exceeding of threshold values in contentions is introduced. Simulation results demonstrate advantages of the proposed schemes over the IEEE 802.15.4 MAC and CSMA/CA scheme in terms of success rate, packet delivery delay, and energy consumption.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.5-10
• /
• 1995

In this paper we present a clustering procedure based on the use of HMM in order to get multiple statistical models which can well absorb the variants of each speaker with different ways of saying words. The HMM-clustered models obtained from the developed technique are applied to the speaker independent isolated word recognition. The HMM clustering method splits off all observation sequences with poor likelihood scores which fall below threshold from the training set and create a new model out of the observation sequences in the new cluster. Clustering is iterated by classifying each observation sequence as belonging to the cluster whose model has the maximum likelihood score. If any clutter has changed from the previous iteration the model in that cluster is reestimated by using the Baum-Welch reestimation procedure. Therefore, this method is more efficient than the conventional template-based clustering technique due to the integration capability of the clustering procedure and the parameter estimation. Experimental data show that the HMM-based clustering procedure leads to $1.43\%$ performance improvements over the conventional template-based clustering method and $2.08\%$ improvements over the single HMM method for the case of recognition of the isolated korean digits.

• Journal of Industrial Technology
• /
• v.40 no.1
• /
• pp.7-12
• /
• 2020

Lithium-ion cells have become the go-to energy source across all applications; however, dendritic growth remains an issue to tackle. While there have been various research conducted and possible solutions offered, there is yet to be one that efficiently rules out the problem without, however, introducing another. This paper seeks to present a fast charging method and system to which lithium-ion batteries are charged while maintaining their lifetime. In the proposed method, various lithium cells are charged under multiple profiles. The parameters of charge profiles that inflict damage to the cell's electrodes are obtained and used as thresholds. Thus, during charging, voltage, current, and temperature are actively controlled under these thresholds. In this way, dendrite formation suppressed charging is achieved, and battery life is maintained. The fast-charging system designed, comprises of a 1.5kW charger, an inbuilt 600W battery pack, and an intelligent BMS with cell balancing technology. The system was also designed to respond to the aging of the battery to provide adequate threshold values. Among other tests conducted by KCTL, the cycle test result showed a capacity drop of only 0.68% after 500 cycles, thereby proving the life maintaining capability of the proposed method and system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.23-30
• /
• 2006

This paper describes the short-channel effect(SCE), corner effect of nano-scale MuGFETs(Multiple-Gate FETs) by three-dimensional simulation. We can extract the equivalent gate number of MuGFETs(Double-gate=2, Tri-gate=3, Pi-gate=3.14, Omega-gate=3.4, GAA=4) by threshold voltage model. Using the extracted gate number(n) we can calculate the natural length for each gate devices. We established a scaling theory for MuGFETs, which gives a optimization to avoid short channel effects for the device structure(silicon thickness, gate oxide thickness). It is observed that the comer effects decrease with the reduction of doping concentration and gate oxide thickness when the radius of curvature is larger than 17 % of the channel width.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.117-122
• /
• 2007

For multiple antenna systems, we consider the hybrid iterative detection of the maximum a posteriori probability(MAP) detection and the linear detection such as the minimum-mean-square-error(MMSE) filtering with soft cancelation. We devise methods to obtain both the lower complexity of the linear detection and the superior performance of the MAP detection. Using the a prior probability of the coded bit which is extrinsic of the outer decoder, we compute the threshold of grouping and determine the detection scheme symbol by symbol. Through the simulation results, it is shown that the proposed receiver obtains the superior performance to the MMSE detector and the lower complexity than the MAP detector.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.721-734
• /
• 2001

This paper proposed automated methods for the detection of breast mass. We analysed characteristic of the mass by using the features on mammograms. The homogeneity was used to distinguish mass and abnormal homogeneous tissue from the Cooper's ligament and multiple threshold method was used to deal with the high density candidates. By using the 8-connectivity, the first step candidates were selected. We generated the dualistic images of each candidate in which we regard the gray value as topographic height information. From these candidates, the second candidates were selected by comparing the circularity and the distribution rates. The final detection was done with the method in which we generated the template of each candidate and compared each other. From these methods, we grade the order from the candidate. We applied the algorithm to the 136 mammograms and compared to the radiologist's outlines of the leisions. The detection resulted that the sensitivity of the proposed methods was 93.38% and 97.63% FP(False positive) which we can segmented mass in the first grade in the 124 cases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.1-7
• /
• 2000

Generally, one-dimensional fiber optic code-division multiple-access(CDMA) system is encoded and decoded using optical orthogonal codes(OOC’s), where two-dimensional fiber optic CDMA system uses optical orthogonal signature pattern codes(OOSPC’s) for parallel data link process. The OOSPC’s should have good autocorrelation and cross-correlation properties. However, if timing information or synchronization of OOSPC’s can be obtained by other means, the property of autocorrelation may not be restricted and we can increase the number of pattern codes. In this paper we introduce the fiber optic CDMA system for parallel transmission of two-dimensional data and investigate methods of generation of two-dimensional pattern codes. The probability density function of interference noise is calculated in interfering OOSPC’s of the users and the corresponding bit error rate is derived.. We compare each OOSPC’s by plotting bit error rate versus threshold values and the number of simultaneous users, from the result, we propose the optimal OOSPC’s conditions for the parallel transmission of two-dimensional data.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.5
• /
• pp.423-435
• /
• 2010

Objectives: The low benefit coverage rate of South Korea's health security system has been continually pointed out. A low benefit coverage rate inevitably causes catastrophic health expenditure, which can be the cause of the transition to poverty and the persistence of poverty. This study was conducted to ascertain the effect of catastrophic health expenditure on the transition to poverty and the persistence of poverty in South Korea. Methods: To determine the degree of social mobility, this study was conducted among the 6311 households that participated in the South Korea Welfare Panel Study in both 2006 and 2008. The effect of catastrophic health expenditure on the transition to poverty and the persistence of poverty in South Korea was assessed via multiple logistic regression analysis. Results: The poverty rate in South Korea was 21.6% in 2006 and 20.0% in 2008. 25.1 - 7.3% of the households are facing catastrophic health expenditure. Catastrophic health expenditure was found to affect the transition to poverty even after adjusting for the characteristics of the household and the head of the household, at the threshold of 28% or above. Conclusions: 25.1% of the households in this study were found to be currently facing catastrophic health expenditure, and it was determined that catastrophic health expenditure is a cause of transition to poverty. This result shows that South Korea's health security system is not an effective social safety net. As such, to prevent catastrophic health expenditure and transition to poverty, the benefit coverage of South Korea's health security system needs to the strengthened.