• Title/Summary/Keyword: Multiple Case Study

Search Result 2,063, Processing Time 0.035 seconds

A Study on the Performance of the Various Multiple Access for the Mobile Computer Network (이동 컴퓨터 통신망용 다중 엑세스 방식의 성능 연구)

  • 백지현;조동호;이영웅
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.17 no.7
    • /
    • pp.641-655
    • /
    • 1992
  • In this paper, the performance of the various multiple accesstechniques for the mobile computer network has been studied in the consideration of the characteristics. Of the mobile communication channel. In the case of the hidden node occurring, it could be seen that the performance of the code division multiple access(CDMA) technique. With simultaneous access function is better than that of the other packet access methods such as carrier sensed multiple access(CAMA). Busy tone mulitiple access(BTMA)and idle signal muitiple access(ISMA) in the view of the throuhtput and mean delay time. Also it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access(CSMA).etc when the fading effect or impulsive noise exists in the mobile channel. Especially in the case of the distributed mobile network. It has been shown that the receiver-transmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.

  • PDF

A Case Study on Family Therapy for Parents with a Daughter Suffering from Multiple Tic Disorder (복합틱장애 증상이 있는 딸을 둔 부부에 대한 가족치료 사례연구)

  • Park, Tai Young;Yu, Jin Hui
    • Journal of Families and Better Life
    • /
    • v.31 no.5
    • /
    • pp.47-63
    • /
    • 2013
  • This study deals with a counseling case in which a mother requested counseling due to the problems of her daughter, who suffers from multiple tic disorder. The participants of this study included five family members (grandmother, father, mother and two female children) and a total of 23 sessions were held from September 2006 to December 2007. Additional counseling ($24^{th}$ counseling session) was conducted on April 1st, 2009. The data was based on recorded transcripts and notes from 24 family therapy sessions. The study used a constant comparative analysis, which uses matrix and network display as an analysis method suggested by Miles&Huberman(1994). The characteristics of the family of origin and the indifference of the husband had caused the wife stress. The couple had frequent conflicts due to dysfunctional communication methods, a clash of values, sexual dissatisfaction, and a lack of communication. This marital conflict became the primary factor of the daughter's multiple tic disorder. Intervention of the family therapist resulted in the setting of treatment goals based on MRI's communication theory and Bowen's family systems theory in order to solve the problem of the daughter's multiple tic disorder. Also, the therapist's intervention techniques included exploring experiences with the family of origin, shedding light on the multigenerational transmission process, exploring dysfunctional attempts at solutions, the therapist's self-disclosure, providing similar cases, dealing with resistance, and suggesting a new communication method. To solve the problem, the therapist helped the family separate the daughter spatially from her parents. Therefore, the therapist's intervention helped reduce the daughter's tics and improve relationships among the family.

A Study on the Data Transmission of Multiple Sensor Using Code Division Multiple Access (코드분할다중접속을 이용한 다중센서 데이터 전송에 관한 연구)

  • Mun, Se-Sang;Park, Woo-Il;Kim, Woo-Shik;Cho, Hyang-Duck
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.16 no.11 s.116
    • /
    • pp.1093-1099
    • /
    • 2006
  • In general, a measuring instrument of sound noise use only one wired channel by one sensor. Therefor the measuring instrument use wired cables as the number of channels are provided by instrument. In a point of observed target it needs data from multiple sensors and In case of measured point is a large numbers the environment of constitution would be complicated because that is in need of channel and cable. So we need the method that can improve the existing transmission channel and cable environment even the measured point is increased. If we use the Code Division Multiple Access(CDMA) we transmit a large numbers of sensor data by using a common transmission channel. We present the method that transmits data of multiple sensor to wireless by using CDMA. This method can simplify the measurement environment dramatically when collecting data by using multiple sensor. We expect this study to contribute the part of multiple access technology and relation technologies on the measuring environment.

A Study on the data transmission of multiple sensor using code division multiple access (코드분할다중접속을 이용한 다중센서 데이터 전송에 관한 연구)

  • Cho, Hyang-Duck;Mun, Se-Sang;Park, Woo-Il;Kim, Woo-Shik
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.133-137
    • /
    • 2006
  • In general, a measuring instrument of sound noise use only one wired channel by one sensor. Therefor the measuring instrument use wired cables as the number of channels are provided by instrument. In a point of observed target it needs data from multiple sensors and In case of measured point is a large numbers the environment of constitution would be complicated because that is in need of channel and cable. So we need the method that can improve the existing transmission channel and cable environment even the measured point is increased. If we use the Code Division Multiple Access(CDMA) we transmit a large numbers of sensor data by using a common transmission channel. We present the method that transmits data of multiple sensor to wireless by using CDMA. This method can simplify the measurement environment dramatically when collecting data by using multiple sensor. We expect this study to contribute the part of multiple access technology and relation technologies on the measuring environment.

  • PDF

A Multiple Case Study of Government Internal Ideation Programs: Understanding Challenges and Identifying Effective Practices

  • Lee, Gwanhoo
    • Asia pacific journal of information systems
    • /
    • v.25 no.3
    • /
    • pp.423-444
    • /
    • 2015
  • Ideation is a process of generating new ideas or solutions using online crowd-sourcing technologies. This process has the potential to change the ways by which government agencies innovate and solve problems. Although increasingly more government agencies are implementing online ideation programs to tap into their employees' ideas and creativity, little is known about the unique challenges and effective practices of such programs. Thus, many government agencies are undergoing trial and error and often reinventing the wheel. This research aims to address this problem. By analyzing a focus group session and four cases of U.S. federal government ideation programs designed for their employees, this research identifies important organizational and technological challenges and effective practices. Furthermore, effective practices are grouped into different phases of ideation process and strategic vs. tactical levels to provide more meaningful and actionable insights. This research is an important step towards building a theoretical foundation for government ideation programs. The implications and limitations of this study are discussed.

Study on Two-Failure GPS RAIM Problem (GPS RAIM에서의 2개 파라미터 고장진단에 대한 연구)

  • 유창선;이상정
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2000.10a
    • /
    • pp.194-194
    • /
    • 2000
  • In aviation navigation by GPS, requirements on availability and integrity must be absolutely satisfied for safety. Current study on accomplishing this integrity includes RAM(Receiver Autonomous Integrity Monitoring), checking integrity internally in GPS receiver itself. However RAIM techniques have be investigated and presented under assumption that there is included only one fault in measurements from GPS, In case of multiple fault, an interaction among bias errors sometimes results in decreasing the effect of multiple fault. This may make an exact fault detection and identification difficult, and study on mutiple fault RAIM focused on. This paper explains the reasons that techniques applied on single fault are not adequate to extend directly to two faults case and shows that RAIM solution on two fault may be given in revised parity space.

  • PDF

A Case Study of Innovation Activities in a Company with Multiple Business Areas (다양한 사업군을 갖는 기업의 혁신활동 사례 연구)

  • Chong, Hye Ran;Hong, Sung Hoon;Lee, Min Koo;Kwon, Hyuck Moo
    • Journal of Korean Society for Quality Management
    • /
    • v.44 no.1
    • /
    • pp.181-198
    • /
    • 2016
  • Purpose: This paper explores the various ways of promoting innovative activities adopted by the companies for raising their competitive positions among the industry based on the previous studies. Methods: A number of successful and mediocre cases of industries were reviewed carefully, and then the customized innovative model was established. Key categories and core elements were first identified for establishing progressive corporate culture and validated with the case of a company with multiple business areas. Results: The key categories were identified as strategic, systematic, human resources, and cultural aspects. The resulting core elements were consistent with those of the case company. Conclusion: Analyzing diverse product groups and companies with different organization culture, the key categories and core elements were derived and validated for companies to win the competitive position in the industry.

A Study on a Basis for the Selection of a Design for Quadratic Model Fits Fearing a Cubic Bias in Multilple Response Case

  • Bae, Wha-Soo
    • Journal of the Korean Statistical Society
    • /
    • v.24 no.1
    • /
    • pp.31-44
    • /
    • 1995
  • In fitting a model, there always exists a discrepancy between the fitted model and the true functional relationship. In measuring this discrepancy, Box and Drapper (1959) used the criterion dividing the discrepancy into two parts which are the bias error part and the variance error one in single response case. In this paper, an optimum design which makes these two types of errors as small as possible is found by extending the Box and Drapper criterion to multiple response situation. Especially, a design is found to meat rotatability conditions when we fit a quadratic model to each response fearing cubic bias. Using the central composite design, an application of general results to a specific case is shown to help understanding the material.

  • PDF

A Stock Assessment of Yellow Croaker using Bioeconomic Model: a Case of Single Species and Multiple Fisheries (생물경제모형을 이용한 참조기의 자원평가에 관한 연구 - 단일어종·다수어업 사례를 중심으로)

  • Sim, Seonghyun;Nam, Jongoh
    • Ocean and Polar Research
    • /
    • v.37 no.2
    • /
    • pp.161-177
    • /
    • 2015
  • This study analyzes the stock assessment of yellow croaker caught mainly by the Korean stow net and gill net fisheries focusing on single species and multiple fisheries. This study standardizes fishing efforts for the two fisheries using the general linear model and uses a surplus production model based on the exponential growth model. The Clarke Yoshimoto Pooley model estimates a maximum sustainable yield(MSY), an allowable biological catch(ABC), fishing efforts for MSY($E_{MSY}$) and for ABC($E_{ABC}$). The bio-economic model is used to estimate the maximum economic yield(MEY) and fishing efforts for MEY($E_{MSY}$). Also, the study employs an economic analysis to estimate the economic interaction between stow net and gill net fisheries. The economic analysis shows the profit accruing to the two fisheries from estimated ABC. Finally, the study compares TACs based on single species and single fishery to TAC based on single species and multiple fisheries. The study proposes that the TAC assessment is necessary for single species and multiple fisheries in order to preserve resources.

A study of the Characteristics of Readmitted Patients in an University Hospital in Korea (재입원 환자의 특성연구)

  • Hong, Joon-Hyun
    • Quality Improvement in Health Care
    • /
    • v.2 no.2
    • /
    • pp.56-71
    • /
    • 1996
  • Background : Review of readmissions in health care facilities is necessary from the viewpoint of both economic concerns and quality considerations. To identify the characteristics, factors, and causes of multiple admissions in comparison with single admissions is essential for both providers and payers in order to assure quality care and efficient use of medical resources. Methods: All discharges from an university hospital in 1993 were analyzed, and the characteristics of multiple admissions were identified and were compared with those of single admissions by using the data bases of the discharge abstract and billing for reimbursement. Medical records of patients readmitted within 6 days after the previous discharge were reviewed to identify the reasons for such prompt readmission. Statistical analysis between groups of patients were performed by using SPSS. Result : The mean age was higher in multiple admissions than those of single admissions, and the average length of stay was longer in multiple admissions than in single admissions. The hospital cost per day is higher in single admissions while the cost per case is higher in multiple admissions. More than half of readmissions occurred within one month after the preceding discharges. Above 15% of the readmission within 6 days after the preceding discharges seemed to have close relationship with quality of care provided during the preceding hospitalization. The death rate of the patients readmitted within 6 days was the highest in comparison with multiple admissions and single admissions. Conclusion : Potential preventable readmissions should be reduced by identifying characteristics of multiple admissions, especially unplanned readmission, and by applying some interventions such as standard predischarge assessment or careful follow-up care after discharge for high risk readmission groups. As the results of these efforts, health care facilities could achieve quality improvement in medical care, and effective use of hospital resources.

  • PDF