• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.189-192
• /
• 2018

This study focused on the development of simulation methodology and design optimization for the DBR(Distributed Bragg Reflectors) structures, which are commonly used in manufacturing optical films and the key components of LED chip and LCD inspection equipments. From the multi-layer simulation, the following results are obtained. First, the wavelength(nm) vs. reflectance(%) can be calculated in the DBR structures that $TiO_2$ and $SiO_2$ thin films are stacked alternately. As a results, it is suggested that highly efficient DBR structures can be designed and manufactured using simulation methodology.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.232-239
• /
• 2015

In this paper, we study the dry transfer technology utilizing PDMS (Polydimethylsiloxane) stamp of a large single-layer graphene grown on Cu-foil as catalytic metal by using Chemical Vapor Deposition (CVD). By changing the surface property of the target substrate through $UV/O_3$ treatment, we can transfer the graphene on the target substrate while minimizing mechanical damages of graphene layer. Multi-layer (1~4 layers) graphene was stacked on $SiO_2/Si$ wafer successfully by repeating thetransfer method/process and then optical transmittance and sheet resistance of graphene layers have been measured as a quality assessment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.49-55
• /
• 2013

A high-voltage highly-integrated analog front-end (AFE) IC for medical ultrasound imaging applications is implemented using standard 0.18-${\mu}m$ CMOS process. The proposed AFE IC is composed of a high-voltage (HV) pulser utilizing stacked transistors generating up to 15 Vp-p pulses at 2.6 MHz, a low-voltage low-noise transimpedance preamplifier, and a HV switch for isolation between the transmit and receive parts. The designed IC consumes less than $0.15mm^2$ of core area, making it feasible to be applied for multi-array medical ultrasound imaging systems, including portable handheld applications.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.820_821
• /
• 2009

전력기기는 일반적으로 상용주파수인 60 Hz의 교류 전원하에서 운용된다. 따라서 고온초전도체를 전력기기에 응용하는데 있어 교류전류나 교류자장에 의한 교류손실 발생 문제는 전력기기의 경제적 운용과 관련하여 중요하게 부각되어 왔다. 또한 고온초전도체에서 발생하는 교류손실은 에너지의 열적 변환으로 인한 냉동부하 문제와도 관련되어 있기 때문에 전력기기의 안정적인 운용을 위해서도 반드시 연구되어야 할 부분이다. 특히 변압기와 같이 유도형 권선이 필요한 전력기기의 경우에는 무유도 권선 형태가 적용되는 다른 전력기기에 비해 교류 손실의 크기가 매우 크기 때문에 이를 줄이기 위한 방안에 대한 연구가 다각도로 이루어지고 있다. 본 연구에서는 임계전류와 인덕턴스의 크기는 동일하지만 권선 형태를 다르게 할 수 있는 유도형 솔레노이드 코일을 제작하였다. 그리고 제작된 솔레노이드 코일의 병렬연결 구조를 달리하여 각각의 구조에 대한 교류손실의 차이를 측정하고 분석하였다. 그리하여 측정된 결과를 토대로 고온초전도 선재를 이용한 솔레노이드 코일에서 교류손실을 줄이기 위한 구조적 방안을 제시하고자 한다.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.436-440
• /
• 2009

The structural and electrical properties of $Al_2O_3/La_2O_3/Al_2O_3$ (ALA) films using a tunnel oxide annealed at various temperatures were investigated. The program/erase properties of the ALA films using the tunnel oxide annealed at $600^{\circ}C$ were superior to others. The program/erase voltage and time of the ALA films using the tunnel oxide annealed at $600^{\circ}C$ were 11 V for 10 ms (program) and -11 V for 100 ms (erase), respectively, and the corresponding memory window was about 1.59 V. In the retention test, the $V_{th}$ distributions of all films were not changed up to about $10^4$ cycles. In this study, all data showed sufficient characteristics to be used in flash memory devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.3
• /
• pp.273-279
• /
• 2006

High-$T_c$ superconducting (HTSC) power cable is one of the interesting parts in power application using HTSC wire. However, its stacked structure makes the current distribution between conducting layers non-uniform due to difference between self inductances of conducting layers and mutual inductances between two conducting layers, which results in lower current transmission capacity of HTSC power cable. In this paper, the transport current distribution between conducting layers was investigated through the numerical analysis for the equivalent circuit of HTSC power cable with a shield layer, and compared with the case of without a shield layer. The transport current distribution due to the increase of the contact resistance in each layer was improved. However, its magnetization loss increased as the contact resistance increased. It was confirmed from the analysis that the shield layer was contributed to the improvement of the current distribution between conducting layers if the winding direction and the pitch length were properly chosen.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.309-315
• /
• 2010

A dual-band dual-polarized microstrip antenna array for an advanced multi-function radio function concept (AMRFC) radar application operating at S and X-bands is proposed. Two stacked planar arrays with three different thin substrates (RT/Duroid 5880 substrates with $\varepsilon_r$=2.2 and three different thicknesses of 0.253 mm, 0.508 mm and 0.762 mm) are integrated to provide simultaneous operation at S band (3~3.3 GHz) and X band (9~11 GHz). To allow similar scan ranges for both bands, the S-band elements are selected as perforated patches to enable the placement of the X-band elements within them. Square patches are used as the radiating elements for the X-band. Good agreement exists between the simulated and the measured results. The measured impedance bandwidth (VSWR$\leq$2) of the prototype array reaches 9.5 % and 25 % for the S- and X-bands, respectively. The measured isolation between the two orthogonal polarizations for both bands is better than 15 dB. The measured cross-polarization level is ${\leq}-21$ dB for the S-band and ${\leq}-20$ dB for the X-band.

• Carbon letters
• /
• v.23
• /
• pp.1-8
• /
• 2017

Polycrystalline diamond (PCD) tools possessing high hardness and abrasive wear resistance are particularly suited for drilling of carbon fiber reinforced plastic (CFRP) composites, where tool life and consistent hole quality are important. While PCD presents superior performance when drilling CFRP, it is unclear how it performs when drilling multi-stack materials such as CFRP-titanium (Ti) stacks. This comparative study aims to investigate drilling of a Ti plate stacked on a CFRP panel when using PCD tools. The first sequence of the drilling experiments was to drill 20 holes in CFRP only. CFRP-Ti stacks were then drilled for the next 20 holes with the same drill bit. CFRP holes and CFRP-Ti stack holes were evaluated in terms of machined hole quality. The main tool wear mechanism of PCD drills is micro-fractures that occur when machining the Ti plate of the stack. Tool wear increases the instability and the operation temperature when machining the Ti plate. This results in high drilling forces, large hole diameter errors, high surface roughness, wider CFRP exit thermal damage, and taller exit Ti burrs.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.53.1-53.1
• /
• 2016

With the official start of the operations of the three 1.6 m KMTNet telescope systems from 2015 October, we have initiated a program named KMTNet Supernova Program (KSP) from 2015 to 2019 aiming at searching for supernovae (SNe), other optical transients and related sources. Taking advantage of the 24-hour coverage, high cadence and multi-color monitoring observations, this is optimal for discovering early SNe and peculiar ones. From the start of the previous test observing runs of ~half a year, we have performed observations on several nearby galaxy groups and nearby galaxies with short separations on the sky. We have developed data reduction/variable object search pipelines, meanwhile we have discovered some interesting transient objects. We also stacked all the images for given fields, searched for new objects/galaxies, and discovered several new dwarf galaxies, e.g., in the NGC 2784 galaxy group field (H. S. Park et al.'s talk). We will report the current project status and the results obtained.

• Korean Journal of Materials Research
• /
• v.30 no.11
• /
• pp.627-635
• /
• 2020

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co₃O₄ and Al₂O₃. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.