• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1099-1105
• /
• 2006

In this paper, the equivalent circuit model of a Rosen-type multilayer piezoelectric transformer(MPT) has been proposed based on the Mason's equivalent circuit model and the principle of single layer piezoelectric plate. From the piezoelectric direct and converse effects, the symbolic expressions between the electric inputs and outputs of the MPT have been derived from the equivalent circuit model. A simplified equivalent circuit model of the MPT whose driving part has a single input form has been proposed. The symbolic expressions of the driving part have been derived from the simplified equivalent circuit model and the model was compared with the multi-input equivalent circuit model through the simulation. In the comparisons between the simulation results and the experimental data, output voltage is 630 Vp-p in case of 11-layered MPT and 670 Vp-p for 13-layered MPT over the experiment range. As the load resistance increases, output voltage increases and saturates over $300k{\Omega}$ and the resonant frequency changes from 102 kHz to 103 kHz. The simulation and the experimental results agree well over different load resistances and frequencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.121-129
• /
• 2008

This paper presents the spatial multiplexing MIMO system to increase data rate to double in MB-OFDM UWB system, which is ECMA standards, and compares BER performance of various receiver structures. The complexity and BER performance of various types of spatial multiplexing receivers are compared and analyzed using diagonal and horizontal encoding techniques for $2{\times}2$\;and\;2{\times}3$ antennas systems. Computer simulations exhibit that $2{\times}2$ MML and $2{\times}3$ ZF method show better BER performance than that of SISO system with simple complexity.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.593-602
• /
• 2014

One of the purposes of an artificial neural netowrk(ANNet) is to implement the largest number of functions as possible with the smallest number of nodes and layers. This paper presents a CoreNet which has a multi-leveled input value and a multi-leveled output value with a 2-layered ANNet, which is the basic structure of an ANNet. I have suggested an equation for calculating the capacity of the CoreNet, which has a p-leveled input and a q-leveled output, as $a_{p,q}={\frac{1}{2}}p(p-1)q^2-{\frac{1}{2}}(p-2)(3p-1)q+(p-1)(p-2)$. I've applied this CoreNet into the simulation model 1(5)-1(6), which has 5 levels of an input and 6 levels of an output with no hidden layers. The simulation result of this model gives, the maximum 219 convergences for the number of implementable functions using the cot(${\sqrt{x}}$) input leveling method. I have also shown that, the 27 functions are implementable by the calculation of weight values(w, ${\theta}$) with the multi-threshold lines in the weight space, which are diverged in the simulation results. Therefore the 246 functions are implementable in the 1(5)-1(6) model, and this coincides with the value from the above eqution $a_{5,6}(=246)$. I also show the implementable function numbering method in the weight space.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.9-11
• /
• 2010

Multiple-input multiple-output (MIMO) systems assisted by multi-relays with single antenna are considered. Signal transmission consists of two hops. In the first hop, the source node broadcasts the vector symbols to all relays, then all relays forward the received signals multiplied by each power gain to the destination simultaneously. Unlike the case of full cooperation between relays such as single relay with multiple antennas, in our case there is no closed form solution for optimal relay power gain with respect to minimum mean square error (MMSE). Thus we propose an alternative approach in which we use an approximation of the cost function based on rank-one matrix decomposition. As a cost function, we choose the trace of MSE matrix. We give several simulation results to validate that our proposed method obtains a negligible performance loss compared to optimal solution obtained by exhaustive search.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.217-218
• /
• 2008

A new diversity technique is proposed for multi-user single-input single-output (SISO) orthogonal frequency division multiplexing (OFDM) uplink system. Each user transmit a symbol using frequency band of all users that are active in the uplink. In addition, a receiver detect each signal using maximum likelihood (ML) method. Simulation results show that the proposed technique improves a diversity order without an additional bandwidth and a loss of data rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.567-572
• /
• 1991

This paper proposes an algorithm of fuzzy model modification which improves fuzzy relation matrix for multi-input/single output dynamic systems. Zadeh's possibility distribution plays an important role in the proposed algorithm and in the use of fuzzy models which are constructed by the proposed algorithm. The required computer capacity and time for implementing the proposed algorithm and resulting models are significantly reduced by introducing the concept of the referential fuzzy sets. A nonlinear system is given to show that the proposed algorithm can provide the fuzzy model with satisfactory accuracy.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.215-220
• /
• 2004

In this paper, some algorithms for robust stabilization of linerar time - invariant single - input - multi output (SIMO) systems subject to parameter perturbatations are presented. At first, the determination algorithm of the largest stable hypersphere in the parameter space of a given characteristic polynomial with its coefficient perturbations near some stable nominal values is presented. These algorithms iteratively enlarge the stability hypersph ere in plant parameter space and can be used to design a controller to stabilize a plant subject to givien range of parameter ecxursions.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.4
• /
• pp.285-302
• /
• 2010

Active aeroelastic control is an emerging technology aimed at providing solutions to structural systems that under the action of aerodynamic loads are prone to instability and catastrophic failures, and to oscillations that can yield structural failure by fatigue. The purpose of the aeroelastic control among others is to alleviate and even suppress the vibrations appearing in the flight vehicle subcritical flight regimes, to expand its flight envelope by increasing the flutter speed, and to enhance the post-flutter behavior usually characterized by the presence of limit cycle oscillations. Recently adaptive and robust control strategies have demonstrated their superiority to classical feedback strategies. This review paper discusses the latest development on the topic by the authors. First, the available control techniques with focus on adaptive control schemes are reviewed, then the attention is focused on the advanced single-input and multi-input multi-output adaptive feedback control strategies developed for lifting surfaces operating at subsonic and supersonic flight speeds. A number of concepts involving various adaptive control methodologies, as well as results obtained with such controls are presented. Emphasis is placed on theoretical and numerical results obtained with the various control strategies.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.398-403
• /
• 2000

The design of multi-stage gear drives is a time-consuming process that includes additional design problems, which are not considered in the design of single-stage gear drives. In the previous research works, the authors have proposed a new algorithm to design multi-stage gear drives at the preliminary design phase. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. In the configuration design process, the positions of gears and shafts are determined by minimizing the geometrical volume (size) of a gearbox. However, various types of spatial constraints should be satisfied in practical design situation. To locate input and output shaft in specified positions is the typical example of such problems. In this paper, the authors show the formulations of spatial constraints applied to the design of four-stage gear drives. The design solution shows considerably good results, and the design system is confirmed to be readily applicable to practical design situation.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.172-179
• /
• 2012

This paper presents the design and analysis of a vibration-driven electromagnetic energy harvester that uses a multi-pole magnet. The physical backgrounds of the vibration electromagnetic energy harvester are reported, and an ANSYS finite element analysis simulation has been used to determine the different alignments of the magnetic pole array with their flux lines and density. The basic working principles for a single and multi-pole magnet are illustrated and the proposed harvester has been presented in a schematic diagram. Mechanical parameters such as input frequency, maximum displacement, number of coil turns, and load resistance have been analyzed to obtain an optimized output power for the harvester through theoretical study. The paper reports a maximum of 1.005 mW of power with a load resistance of $1.9k{\Omega}$ for 5 magnets with 450 coil turns.