• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.1021-1027
• /
• 2012

In this paper, multi-string power balancing system for streetlight was developed. Accordingly, the components of the system was developed, unit converters, MPPT control unit, a bank of Li-ion battery and controls the charging and discharging. Loss by improving the efficiency of the system through the parallel operation of the unit converter output will be reduced. And by improving the efficiency of the system through the unit converter parallel operation, output losses will be reduced. Charging and discharging efficiency of the device used in a typical solar streetlight is calculated based on the maximum power input. Because of the variation of the input power has a weakness. In this paper, flexible to changes in the input, and a system was developed to minimize the cost per watt. Measure the performance of the unit module from the system, the result was more than 91%. And the charging capacity 12 V/105 Ah, module power 180 W, respectively. Should expect to be able to improve performance through continuous monitoring in the future.

• Journal of Power Electronics
• /
• v.13 no.2
• /
• pp.296-303
• /
• 2013

This paper proposes a high efficiency three-phase cascaded phase shifted H-bridge multi-level inverter without DC/DC converters for grid-tied multi string photovoltaic (PV) applications. The cascaded H-bridge topology is suitable for PV applications since each PV module can act as a separate DC source for each cascaded H-bridge module. The proposed phase shifted H-bridge multi-level topology offers advantages such as operation at a lower switching frequency and a lower current ripple when compared to conventional two level topologies. It is also shown that low ripple sinusoidal current waveforms are generated with a unity power factor. The control algorithm permits the independent control of each DC link voltage with a maximum power point for each string of PV modules. The use of the controller area network (CAN) communication protocol for H-bridge multi-level inverters, along with localized PWM generation and PV voltage regulation are implemented. It is also shown that the expansion and modularization capabilities of the H-bridge modules are improved since the individual inverter modules operate more independently. The proposed topology is implemented for a three phase 240kW multi-level PV power conditioning system (PCS) which has 40kW H-bridge modules. The experimental results show that the proposed topology has good performance.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.4
• /
• pp.231-238
• /
• 2009

DNA sequences are the fundamental information for each species and a comparison between DNA sequences of different species is an important task. Since DNA sequences are very long and there exist many species, not only fast matching but also efficient storage is an important factor for DNA sequences. Thus, a fast string matching method suitable for encoded DNA sequences is needed. In this paper, we present a fast string matching method for encoded DNA sequences which does not decode DNA sequences while matching. We use four-characters-to-one-byte encoding and combine a suffix approach and a multi-pattern matching approach. Experimental results show that our method is about 5 times faster than AGREP and the fastest among known algorithms.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1059_1060
• /
• 2009

신재생에너지 분야 중 가장 활발하게 개발 및 보급되는 태양광발전은 유한 에너지인 석유, 석탄, 천연 가스에 비해 비고갈성의 청정 에너지원으로 각광 받고있다. 화석연료를 사용하면서 발생 할 수 있는 지구환경 문제에 대처 할 수 있고, 수력이나 원자력발전과 달리 비교적 입지에 영향이 적을 뿐만 아니라 전력 수요지 근처에 설치하여 직접 전기에너지를 공급할 수 있는 이점이 있다. 반면에 그늘이나 구름 등 주변 환경에 영향을 많이 받고 넓은 부지와 높은 초기 투자비를 필요로 한다. 특히 태양광발전은 직류전력을 발생하므로 이를 교류로 변환시키는 태양광발전용 전력변환장치(Power Conditioning System; 이하 "PCS")가 필요하다. 본 고에서는 중소기업지원과제로 개발되어 한전 전력연구원의 태양광발전 실증시험장에서 실 계통 연계 운전을 통하여 취득한 50kW급 계통연계형 multi- string PCS의 초기 운전특성에 대하여 소개하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.38-45
• /
• 2003

This research is concerned with the dynamic modeling of the multi-purpose satellite with deployable solar arrays equipped with strain energy hinges(SEH). To this end, we proposed the use of the equivalent torsional spring for the SEH and derived the equations of motion assuming that the satellite and solar arrays are being rigid. We also considered the effect of the support string for the ground experiment model, which has been observed as a critical factor affecting the deployment in the ground experiments. From the numerical simulation results, it is found that solar arrays are deployed in a similar pattern but the hub motions are different because of the support strings. It was concluded that the non-gravity deployment of the solar arrays can be approximately simulated by the ground experimental facility. The effects of the support string are also investigated by varying the length of the string. It was found that the current length of the string is adequate for the ground experiment. Ground experimental results will follow.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.938-941
• /
• 2012

LED is divided to multichannel in order not to exceed a certain voltage in aspects of electric standard. However, it's not possible to know in accordance with what channel SMPS controls the constant voltage and current. In order to solve this problem, it needs to detect the maximum LED String voltage which is applied to LED control circuit, and it is possible to minimize the voltage drop when a difference of LED string voltage occurs by each channel if LED is controlled by the maximum LED string voltage detected. In addition, it is also possible to maximize the efficiency of LED if change LED voltage by detecting the maximum voltage. Feasibility of this claim was verified through implementation of the circuit.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.11a
• /
• pp.173-174
• /
• 2010

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.1
• /
• pp.13-22
• /
• 1989

This study made an analysis of the characteristics of vibration & tone color of the piano strings on which a concentrated mass was set to give variety of different variations to the gamut. Theoretical analyses in this study were based on discrete and continuous system, of which the former was transformed into a multi-degree of freedom system by dividing into a number of small parts, while the latter utilized mode summation and Laplace transformation methods. And experiments were carried out with setting concentrated masses on upright piano string.

• Steel and Composite Structures
• /
• v.35 no.5
• /
• pp.641-657
• /
• 2020

A unique lightweight string truss deployable bridge assembled by thin-walled fiber reinforced polymer (FRP) and metal profiles was designed for emergency applications. As a new structure, investigations into the static structural performance under the serviceability limit state are desired for examining the structural integrity of the developed bridge when subjected to unsymmetrical loadings characterized by combined torsion and bending. In this study, a full-scale experimental inspection was conducted on a fabricated bridge, and the combined flexural-torsional behavior was examined in terms of displacement and strains. The experimental structure showed favorable strength and rigidity performances to function as deployable bridge under unsymmetrical loading conditions and should be designed in accordance with the stiffness criterion, the same as that under symmetrical loads. In addition, a finite element model (FEM) with a simple modeling process, which considered the multi segments of the FRP members and realistic nodal stiffness of the complex unique hybrid nodal joints, was constructed and compared against experiments, demonstrating good agreement. A FEM-based numerical analysis was thereafter performed to explore the effect of the change in elastic modulus of different FRP elements on the static deformation of the bridge. The results confirmed that the change in elastic modulus of different types of FRP element members caused remarkable differences on the bending and torsional stiffness of the hybrid bridge. The global stiffness of such a unique bridge can be significantly enhanced by redesigning the critical lower string pull bars using designable FRP profiles with high elastic modulus.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.225-228
• /
• 2001

DNA computing has been applied to the problem of getting an optimal solution since Adleman's experiment. DNA computing uses strings with various length and four-type bases that makes more useful for finding a global optimal solutions of the complex multi-modal problems. This paper presents DNA coding method for finding optimal solution of the multi-modal function and compares the efficiency of this method with the genetic algorithms (GA). GA searches effectively an optimal solution via the artificial evolution of individual group of binary string and DNA coding method uses a tool of calculation or Information store with DNA molecules and four-type bases denoted by the symbols of A(Ademine), C(Cytosine), G(Guanine) and T(Thymine). The same operators, selection, crossover, mutation, are applied to the both DNA coding algorithm and genetic algorithms. The results show that the DNA based algorithm performs better than GA.