• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.91-92
• /
• 2012

RC structure which is located at shoreline has more serious damages compared with inland structure, because it is directly exposed to chlorine ion which is called incoming salt. In the transmission of incoming salt, differences in transmitted volume of incoming salts could occur according to the influences of local shoreline topography which includes surrounding weather conditions, types of building placements, obstacles of wind tunnel etc. And therefore, for the application of boundary conditions for durable offshore structure design against the salt attack, comparative analysis through wind tunnel test and fluid value simulation are executed in order to investigate the moving and adhesion process of incoming salt to offshore structure.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.906-913
• /
• 1999

Time-dependent period and energy of free vibration of a string, whose length varies with time at a constant rate, are investigated by a traveling wave method. When the string length is increased, the vibration period increase, but the free vibration energy decrease with time. However, when the string undergoes retraction, the vibration energy increases with time. String tension together with non-zero instantaneous velocity at the moving boundary results in energy variation. Analytical solutions by the traveling wave method are compared with previous results using the perturbation method and Kotera's approach.

• Applied Biological Chemistry
• /
• v.14 no.3
• /
• pp.201-205
• /
• 1971

The electrophoretic patterns of the thin and thick layers of EWP were observered and the densitometry was conducted. 1. Most characteristic were the patterns of both layers at 7-day incubation compared with those of fresh stage. 2. After 15 days the patterns of both layers were almost same. 3. The ratio of some components of the fresh EWP is in a good accordance with the other wisely measured data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.709-712
• /
• 2002

For the electro-discharge machining of an electro-conductive anisotropic composite, an unsteady state formulation was established and solved by Galerkin's finite element method. The distribution of temperature on work piece, the shape of the crater and the material removal rate were obtained in terms of the process parameters. As the spark was initiated the workpiece immediately started to melt and the heat affected zone was formed. The moving boundary of the crater was also identified with time. When the radial and axial conductivities were increased separately the temperature distribution and the shape of the crater were shifted in the same direction respectively and the material removal rate was found to be higher in the case of increasing radial conductivity rather than the axial conductivity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1376-1380
• /
• 2004

본 연구에서는 홍수범람지도 제작을 위해 사용되는 수치모형의 검증을 수행하고자 한다. 검증할 수치모형은 스위스의 Beffa에 의해 개발된 FLUMEN(FLUvial Modeling ENgine)으로서 수심 적분된 2차원 비선형 천수방정식에 불규칙 심각망을 이용한 유한체적법(finite volume method)이 적용된 수치모형이며 스위스, 독일, 오스트리아 등에서 홍수범람해석에 사용된 바 있는 모델이다. FLUMEN 모형의 검증을 위하여 범람해석시 가장 중요한 문제인 이동경계조건(moving boundary condition)을 포함하고 있는 원형섬에서의 고립파에 처오름높이를 계산하여 수리모형실험 결과와 비교한다. 수리모형실험은 미국 육군 공병단 산하의 해안공학연구소(CERC, Coastal Engineering Research Center)에서 수행되었으며(Liu 등, 1995) 수조의 중앙에 높이 0.625m, 해저지름 7.2m, 경사각 $14.04^{\circ}$의 원형섬이 위치한다. 본 연구 결과, 수치해석으로 계산된 섬에서의 실제 처오름높이와 입사파의 파고의 비(R/A)는 수리모형실험의 결과와 어느 정도 일치하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.209-213
• /
• 2006

In this paper describes image enhancement technique using deconvolution processing for ultrasonic nondestructive testing. . When flaws are detected for B-scan or C-scan, blurring effect which is caused by the moving intervals of transducer degrades the quality of images. In addition, acquisited images suffer form speckle noise which is caused by the ultrasonic components reflected from the grain boundary of material [1,2]. The deconvolution technique can restore sharp peak value or clean image from blurring signal or image. This processing is applied to C-scan image obtained from known specimen. Experimental results show that the deconvolution processing contributes to get improved the quality of C-scan images.

• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.290-297
• /
• 1991

For the efficient utilization of the solar thermal energy to overcome the time gap between to supply and demand, an efficient heat storage technique, especially high density-latent-heat storage system, is necessary. In this study, the performance of a panel type latent heat storage equipment during heat discharging process was analyzed theoretically and experimentally. In order to find out the performance of the system, computer simulation programs were developed by finite difference method. The governing equations were constructed by two dimensional heat conduction model with moving boundary. The results of the experimental and the theoretical analysis were reasonably well agreed. The efficiencies of the double pipe type and the panel type latent heat storage equipment were compared.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.67-70
• /
• 1996

In this paper, the three-dimensional stress effect of thermal oxide is simulated. We developed the three-dimensional finite element numerical simulator including three-dimensional adaptive mesh generator that is able to refine and eliminate nearby moving boundary of oxide, and oxidation solver with stress model. The main effect of deformation at the coner area of oxide is due to distribution of oxidant, but the deformation of oxide is affected by the stress in the oxide. In the island structure which is the structure mostly covered with nitride and a coner is opened to oxidation, oxidation is reduced at the coner by compressive stress. In the hole structure which is the structure mostly opened to oxide and a coner is covered with nitride, however, oxidation is increased at the coner by tensile stress.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.103-111
• /
• 2006

To optimize the ventilation and smoke control systems in subway equipped with platform screen door, the technology to analyze the unsteady tunnel flow caused by running of train should be developed. The development of model experiment and numerical analysis technique with relation to unsteady flow of subway were presented. The pressure and air velocity changes in 1/20-scaling experiment unit were measured and results were comparied to those of 3-D unsteady numerical analysis applied with sharp interface method. The experimental and numerical results were quantitatively similar and it would be reasonable to apply sharp interface method to analyze the unsteady flow in subway equipped with platform screen door.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.267-274
• /
• 1999

An understanding of the natural frequencies of a beam is virtually a prerequisite to the understanding of its response in forced vibration due to shock, ground acceleration or moving loads. Contrary to the frequencies of the prismatic bars with arbitrary boundary conditions, those of a tapered bar are hard to determine when one employs convevtional neutral equilibrium or energy method. In this paper, finite element method is adopted to determine the fundamental frequencies of the non-symmetrically tapered bars. The bars assume the shapes of straight lines along the axis. The parameters considered in this study are sectional parameter, m,n and taper parameter, $\alpha$ For the structural engineer's convenience, the results by finite element method are expressed by simple algebraic equations, by which first mode frequencies are easily estimated. And they agree fairy well with those by F.E.M in most cases.