• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.62-65
• /
• 2006

In this paper, nonlinear nonplanar vibration of a flexible rectangular cantilever beam is analyzed when one-to-one resonance occurs to the beam. The planar and nonplanar motions of the beam are analyzed in time and frequency domains. In frequency domain, FFT analyzer is used to perform autospectrum and cepstrum analyses for nonlinear response of the beam. In time domain, an oscilloscope is used to investigate the phase difference between the planar and nonplanar motions and to perform Torus analysis in the phase space. Through those analyzing process, the main frequencies of superharmonic, subharmonic, and super-subharmonic motions are investigated in the nonplanar motion due to one-to-one resonance. Analyzing the phase difference between the planar and nonplanar motions, it is observed that the phase difference varies in time.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.1
• /
• pp.91-108
• /
• 1999

In our previous work using a motion analyzer and 3-dimensional sonic digitizer, the arm shapes for 23 women in their early twenties were classified into three characteristic types. In order to design sleeves, suitable for arm movements for the three characteristic arm shapes, a relationship between arm length variation and shoulder/elbow angles has been investigated for four cases of arm movements (flexion, extension, adduction and abduction). Each arm movement can be characterized by the changes in shoulder angle and the changes in elbow angle at the maximal shoulder angle. In all the four cases of arm movements, the changes of shoulder length and cap height are largest at the maximal shoulder angle. These changes were little affected by changes in elbow angle. The changes in the lower arm length and the difference between cap height and upper arm length are the largest at the maximal elbow angle of the maximal shoulder angle. There is a linear relationship between cap height and shoulder angle during arm movements; thus, in designing sleeves the cap height can be determined from the regression of cap height vs. shoulder angle.

• Journal of the Korean Home Economics Association
• /
• v.34 no.3
• /
• pp.123-136
• /
• 1996

This report deals with the relations between the vibration restraint and the stress-strain properties of the stretch fabrics. For this purpose, a survey was carried out about the preferences in sports-brassiere. Six experimental sports-brassieres of an equal design, but of different materials were tested for vibration using an accelerometer and a motion analyzer while the subject is jogging. 1. The results of the survey on sports-brassiere preferences are as follows; Preferable factors are simple design, shield and close adhesion of sports brassiere. Dissatisfied factors on the sports-brassiere are drooping, vibrating of the breast, itching and wetting. The B-cup-size group perceive the bigger vibration and drooping than A-cup-size. 2. The results of the wearing tests are as follow; This experiment shows the vibration restraint effects on different stretch fabrics, such as hard, medium and soft nature. There was a linear relationship between the vibration restraint and combination of different types of stretch fabrics. Among different brassiere types, the 2-layered brassiere (inner layer of high tension fabric and outer layer of lower stretch fabric) showed the least vibration. In the case of 2-lay brassiere, the wearing comfort rate was highest.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.1
• /
• pp.19-24
• /
• 2003

Design and test results of a VRAG(Vacuum Rotary Arc Gap) switch were presented. To control the damage of electrodes caused by the vacuum arc, Lorentz's force by the radial magnetic field between spiral electrodes was used to rotate the vacuum uc. VRAG switch electrodes were made of the material of CuCr and OFHC. Gap distance between two spiral type electrodes for the rotation of the arc discharge is 8, 10, 12mm. In the cathode, one trigger electrode was inserted into each spiral wing. Normal operation of the VRAG switch was confirmed with 10.6[$mutextrm{s}$]of trigger delay and 2~3[$mutextrm{s}$] of the jitter time. The speed of the vacuum arc was measured to be 0.6 ~ 1[km/s] by a motion analyzer.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.93-99
• /
• 2011

In this paper, an ATSC(Advanced Television Standard Committee)-M/H(Mobile/Handheld) multiplexer is designed and implemented using an embedded Linux based hardware platform. The ATSC-M/H multiplexer is composed of a CPU(Central Processor Unit), an FPGA(Field-Programmable Gate Array), ASI(Asynchronous Serial Interface)/SMPTE310(Society of Motion Picture and Television Engineers310) interface board, and a GPS(Global Position System) clock processing block. The main functions of the ATSC-M/H multiplexer executed in the CPU and FPGA are described. The operation of the ATSC-M/H multiplexer is verified by processing its broadcast signal on a commercial receiver analyzer.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.61-65
• /
• 2011

The objective of this study was to examine the effect of various discontinuous Percoll washing conditions on motile sperm recovery rate and motion kinematics. Frozen semen samples from 3 bulls (0.5 ml plastic straws, 6% glycerol in egg yolk-Tris-glycerol extender) were thawed in $37^{\circ}C$ water bath for 1 min. After thawing, the mixed semen samples were randomly allocated to 12 treatment groups. Briefly, the spermatozoa were centrifuged for three different time lengths (10, 20, and 30 min) at two gravities ($300{\times}g$ and $700{\times}g$) through two concentrations of discontinuous Percoll density gradient of 1 ml 90%: 1 ml 45% Percoll and 2 ml 90%: 2 ml 45% Percoll to remove extender, debris, and dead spermatozoa. Motile sperm recovery rate and motion kinematics were evaluated by computer assisted sperm analyzer using Makler counting chamber. Sperm motility (%) and motile sperm recovery rate showed similar pattern in all treatment groups. However, sperm motility (%) and motile sperm recovery rate were highest at $700{\times}g$ for 30 min through a discontionous Percoll density gradient of 1 ml 90%: 1 ml 45% Percoll. There were no significant differences in motion kinematics after various Percoll washings. These results suggest that force of centrifugation, centrifugation time, and Percoll volume significantly affect motile sperm recovery rate.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.2
• /
• pp.37-41
• /
• 2003

The aim of this study is to present the basic reference data Effect of uneffected side insole on Gait Pattern in Hemiplegia Patients. The basic gait parameters were extracted from 10 Adult Hemiplegia Patients, 5 left Hemiplegia Patients and 5 right Hemiplegia Patients, 50 to 60 years of age using VICON 512 Motion Analyzer. The results were as follows; 1) The mean Cadence of the shoes to the 1cm insole in shoes were $70.58{\pm}12.67\;steps/min$, to $77.28{\pm}14.58\;steps/min$.(p>0.05) 2) The mean Walking Speed of the shoes to the 1cm insole in shoes were $0.40{\pm}0.17\;m/s$, to $0.49{\pm}0.18\;m/s$.(p>0.05) 3) The mean Stride Length of the shoes to the 1cm insole in shoes were $0.67{\pm}0.20\;m$, to $0.75{\pm}0.19m$.(p>0.05) 4) The mean anterior angles of pint on the pelvic tilt for different the shoes to the 1cm insole in shoes were $13.22{\pm}7.25^{\circ}$, to $11.68{\pm}4.02^{\circ}$.(p>0.06) 5) The mean maximal angles of pint on the hip flexion motion for different the shoes to the 1cm insole in shoes were $24.62{\pm}8.35^{\circ}$, to $24.74{\pm}9.12^{\circ}$.(p>0.05) 6) The mean maximal angles of joint on the knee flexion motion for different the shoes to the 1cm insole in shoes were $34.27{\pm}16.71^{\circ}$, to $35.93{\pm}18.22^{\circ}$.(p>0.05) insole in shoes were $15.97{\pm}7.72^{\circ}$, to $18.77{\pm}11.03^{\circ}$.(p>0.05) 7) The mean maximal angles of joint on the ankle dorsiflexion motion for different the shoes to the 1cm. 8) The mean maximal angles of joint on the ankle plantarflexion motion for different the shoes to the 1cm insole in shoes were $-4.24{\pm}10.66^{\circ}$, to $-7.04{\pm}11.00^{\circ}$.(p<0.05)

• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.467-477
• /
• 2011

This study was performed to investigate the effects of tibial rotation while going up stair on muscle activity of vastus medialis oblique and vastus lateralis, and on patellar displacement. The subjects included 30 people (male: 15; female: 15) who were randomly assigned to the tibial internal-rotation, neutral-rotation, and external-rotation groups. The subjects went up the stair while performing the assigned rotations, and the rotation of the hip and the displacement of the patella were measured using a 3D motion analyzer. In addition, the maximum voluntary isometric contraction (MVIC) of the vastus medialis oblique and vastus lateralis were measured using surface electromyogram. On the tibial internal rotation, the hip rotation significantly appeared in the same direction and so did on the tibial neutral and external rotations(p<.001). Although the MVIC of the vastus medialis oblique and vastus lateralis did not significantly differ by tibial rotation during the stair ascent, the MVIC of the vastus medialis oblique was higher than that of the vastus lateralis during the internal and neutral rotations (p<.05). In addition, during the stair ascent, the displacement of the patella was more significant during the tibial external rotation than during the tibial internal and neutral rotations(p<.001). Thus, patients with patellofemoral pain are required to be considered the effects of tibial rotation for their rehabilitation.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.15 no.2
• /
• pp.63-68
• /
• 2009

Purpose : The purpose of this study was to investigate the effect of tensor fasciae latae length on the rotation of pelvis during one leg stance. Methods : 41 healthy adults participated in this study. The movement of the pelvis and trunk was measured using 3-dimensional motion analyzer, during one leg stance. The movement of the pelvis and trunk was collected lateral shift, rotation, side bending, and flexion-extension. Tensor fasciae latae length of subjects was measured in sidelying positon with neutral position of hip joint and flexion $90^{\circ}$ of knee. Also, the range of motion of hip exteral and interal rotaion were measured in prone position wih lexion $90^{\circ}$ of knee. The subjects were separated 2 groups that more pelvic rotation group(n=15) and less pelvic rotation group(n=15) according to the degree of pelvic rotation. Results : The more pelvic rotation group was showed significantly higher in the ROM of hip external rotation than less pelvic rotation group(p<0.05). The difference of tensor fasciae latae length not showed significant difference between groups. During one leg stance, The movement of the shifting and flexion-extension of trunk and pelvis were not showed significant difference. But the side bending and the rotation of pelvis and trunk showed significant difference between groups. Conclusion : The difference of tensor fasciae latae length not showed significantly in more pelvic rotation group and less pelvic rotation group. But, this study suggests that the pelvis instability brings the instability of the trunk during one leg stance.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.333-341
• /
• 2016

Objective: The purpose of this study was to assess the consistency of the gliding and push-off motion for single leg skating from the first to fourteenth steps. We hypothesized that: 1) there would be no difference in stroke trajectory, step rate, and cycle rate between the left and right steps of gliding; and 2) there would be a difference in the resultant velocity of toe push-off and the horizontal velocity of the center of mass after six step push-offs. Method: The study included five male 500-m speed skaters (mean height, $1.80{\pm}0.02m$; mean weight, $76.8{\pm}3.96kg$; record, $35.83{\pm}0.30sec$; 100-m record, <9.97 sec). Data were collected from the first to fourteenth steps (40 m) and recorded using five digital JVC GR-HD1KR video cameras (Victor Co., Japan) operating at a sampling frequency of 60 fields/sec and shutter speed of 1/500 sec. For each film frame, the joint positions were digitized using the KWON3D motion analyzer. Position data were filtered with low-pass Butterworth $4^{th}$ order at the cut-off frequency of 7.4 Hz. Results: The right toe of the skating trajectories at $2^{nd}$, $5^{th}$, and $7^{th}$ strokes differed from those of the left toe. The angles of the right and left knee demonstrated unbalanced patterns from the flexion and extension legs. The step and cycle rates of the right and left leg differed from the start until 20 m. The resultant velocities of the toe at the push-off phase and of the body mass center diverged before the six push-offs. Conclusion: This study's findings indicate that the toe of skating trajectory on left and right sliding after push-off should maintain a symmetrical trajectory. The resultant velocity of toe push-off and horizontal velocity from the center of body need to be separated after about six step push-offs.