• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.359-363
• /
• 2004

Numerous studies have been performed to analyze various phenomena of human's walking, gait. In the present study, unrecognized walking and recognized walking were analyzed by three dimensional motion capture system(VICON motion system Ltd., England) and simulated by computer program. Two normal males participated in measuring the motion of unrecognized and recognized walking. Six infrared cameras and four force plates were used and sixteen reflective markers were attached to the subject to capture the motion. A musculoskeletal model was generated anatomically by using ADAMS(MSC software corp., USA) and LifeMOD(Biomechanics Research Group Inc, USA). The inverse dynamic simulation and forward dynamic simulation were also performed. The result of simulation was similar to the experimental result. This study provides the base line for dynamic simulation of the falling walking. It will be useful to simulate various another pathologic gaits for old peoples.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.622-635
• /
• 2009

Laser Inertial Navigation System(LINS) consists of Ring Laser Gyroscopes(RLG) and accelerometers. RLG has a lock-in region in which there is zero output for input angular rates less than about 0.1deg/sec. The lock-in region is generated by the imperfect mirrors in RLG. To avoid the lock-in region, a sinusoidal motion called dither motion is applied on RLG. Therefore this dither motion is measured by RLG/accelerometer even if at a stop state. In this situation, the performance on the initial alignment of LINS can be degraded. In this paper, we analyze the performance on the initial alignment of LINS theoretically and experimentally. Analysis results include how dither motion, the pre-filter and the corner frequency in alignment loop affects the performance on the initial alignment of LINS.

• 한국인터넷방송통신학회논문지
• /
• 제8권6호
• /
• pp.111-117
• /
• 2008

본 논문은 권투 모션 인식에 대한 연구로서 게임이나, 애니메이션 등의 분야에 응용될 수 있다. 권투 모션의 인식을 위하여 주성분분석과 동적시간정합 알고리즘을 적용한 실험을 하여 비교 연구하였다. 주성분분석 이론은 인식하고자 하는 데이터의 차원을 축소하여 특정 벡터를 추출하여 비교하는 알고리즘이며, 동적시간정합은 두 순차적인 데이터의 유사성을 구하는 알고리즘이다. 모션 인식을 위해 두 상이한 알고리즘을 비교하여 성능을 고찰하고, 권투 모션을 구성하기 위해 만든 모션캡쳐 시스템을 소개한다. 구성된 권투 모션 데이터로부터 모션 그래프를 구성하고, 정규화 과정을 처리한 후, 각각 5명의 연기자의 모션에 대해 인식을 시도하여 실험을 통해 인식률 결과를 보여준다.

• Journal of Biosystems Engineering
• /
• 제12권3호
• /
• pp.17-29
• /
• 1987

A 10-degree of freedom mathematical model of motion for power tiller-trailer system was developed. This model can predict motion characteristics of power tiller trailer system while travelling over smooth and irregular ground surfaces under various operating conditions. The model provide, the fundamental data needed to improve the stability of power tiller-trailer systems.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.149-154
• /
• 1989

Generally Cam-Follower systems consist of two elements: Cam is for rotating motion and follower for reciprocating motion. Depending on the shape of cam and type of follower, the motion of cam-follower system is determined. Thus design process and analysis process must be well defined. The design process means to find the coordinates of cam shape which can be defined the given motion of follower and the analysis process means to determine the motion curve of follower corresponding to the given cam based on the dimensions of a cam-follower system. This paper consists of two parts: One is development of a numerical method for design and analysis of cam-follower systems, the other is for development of a CAD program and its application. As the first part of the paper, an iterative contact method is proposed. This method can calculate the contact points between cam and roller and determine their contact angles iteratively. The second part of the paper presents the structure of a CAD program and its availability to the industrial applications.

• 한국운동역학회지
• /
• 제19권3호
• /
• pp.425-433
• /
• 2009

본 연구의 목적은 속구와 멀리던지기 동작 사이의 상호관계를 밟히며, 속구와 멀리던지기 동작의 투구시 운동학적으로 어떠한 차이가 있는 밝히는 것이다. 8명의 대학교 야구선수들이 실험에 참여하였다. APAS(Ariel Performance Analysis System) 동작분석시스템을 이용하여 속구와 멀리던지기 동작에 대한 운동학적 변인을 구하여 분석하였다. 본 연구의 결과로 신체중심의 전후변위에서 투구후반부에서 속구가 멀리던지기보다 신체중심이 앞으로 이동하였고, 상하변위에서는 속구가 더 낮은 자세를 보였다. 오른손의 속도에서는 릴리즈 시 속구가 더 빠르게 나타났고, 팔꿈치관절에서는 투구중반부에서는 속구가 더 신전되었고, 릴리즈에서는 동일하였고, 어깨관절에서는 팔 가속지점에서 속구가 더 신전된 것으로 나타났다. 몸통경사에서는 릴리즈 시 속구는 전방으로 멀리던지기는 후방경사를 취하고 있었다. 보폭은 속구가 더 긴 것으로 나타났다. 2가지 투구동작에서 동일한 자세에서 시작하지만, 각 변인에 따라 공통점과 차이점을 발견할 수 있었다. 이러한 이유로, 속구를 던지기 위해 멀리던지기 훈련이 어느 정도 도움이 될 것으로 생각된다.

• 한국인터넷방송통신학회논문지
• /
• 제14권1호
• /
• pp.169-177
• /
• 2014

DVR 및 NVR을 이용한 디지털 저장매체를 영상감시 시스템에서 활용하게 되면서 영상처리 모듈의 개발은 영상 보안 시장의 필수적인 요소이다. 특히 네트워크 카메라의 등장은 기존 아날로그 방식의 CCTV를 대체하면서 영상처리 모듈 개발의 필요성을 더욱 부각시키고 있다. 본 논문에서는 움직임 감지 기법을 이용한 영상 감시 서버를 설계 및 구축하고 서버에서 처리되는 영상처리 결과를 실시간으로 모바일 디바이스에서 확인 가능한 영상감시 시스템을 개발하였다. 영상처리를 위해 리눅스 기반의 서버에 오픈소스 OpenCV를 활용한 영상처리 모듈을 개발하였고, 네트워크 카메라로부터 전송되는 실시간 비디오 데이터를 저장 및 가공하여 안드로이드기반 모바일 기기에서 검색 가능한 영상감시 시스템을 구축하였다.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.90-99
• /
• 1996

In the area of assembly process of micro-chips and electronic parts on the printed circuit board, surface mounting device(SMD) is used as a fundamental tool. Generally speaking, the motion of the SMD is based on the ball screw system operated by any type of actuators. The ball screw system is a mechanical transformed which converts the mechanical rotational motion to the translational one. Also, this system could be considered as an efficient motion device against mechanical backlash and friction. Therefore a dynamic modeling and state sensitivity analysis of the ball screw system in SMD have to be done in the initial design stage. In this paper, a simple mathematical dynamic model for this system and the sensit- ivity analysis are mentioned. Especially, the bond graph approach is used for graphical modeling of the dynamic system before analysis stage. And the direct differentiation method is used for the state sensit- ivity analysis of the system. Finally, some trends for the state variables with respect to the design variables could be suggested for the better design and faster operating based on the results of dynamic and state sensitivity.

• 대한조선학회논문집
• /
• 제40권1호
• /
• pp.20-27
• /
• 2003

The FPSO is moored by mooring lines to keep the position of it. The nonlinear motion analysis of the moored FPSO must be carried out in the initial design stage because sea environments affect motion of it. In this paper, the mathematical model is based on the slow motion maneuvering equations in the horizontal plane considering wave, current and wind forces. The direct integration method is employed to estimate wave loads. The current forces are calculated by using mathematical model of MMG. The turret mooring forces are quasi-statically evaluated by using the catenary equation. The coefficients of a model for wind forces are calculated from Isherwood's experimental data and the variation of wind speed is estimated by wind spectrum according to the guidelines of API-RP2A. The nonlinear motions of FPSO are simulated under external forces due to wave, current, wind including mooring forces in time domain.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권4호
• /
• pp.30-39
• /
• 2001

This paper investigates vibrational motion of a flexible beam fixed on a moving cart and carrying a moving mass. The equations of motion of the beam-mass-cart system are analysed through the unconstrained modal analysis. The exact normal mode solution used in modal analysis correspond to the eigenfrequencies for each position of the moving mass and to the ratios of the weight of the beam-mass-car system. Time solutions of normal modes are also transformed properly according to the position of the moving mass. Numerical simulations are carried out to obtain open-loop responses of the system in tracking pre-designed paths of the moving mass. The simulation results show that the model predicts the dynamic behavior of the beam-mass-cart system well. Experiments are carried out to show the validity of the proposed analytical method.