• Applied Microscopy
• /
• v.12 no.2
• /
• pp.69-79
• /
• 1982

In order to define the morphological changes of the secreting cells of prothoracic gland during larva-pupal molt, ultrastructural observations were carried out using Bombyx mori L. as the experimental material. At first stage of present experiment, 4 day old 5th instar larva, the polyhedral secreting cells were centrally located in the prothoracic gland surrounded by the connective sheath. The secreting cells were attached to the neighboring cells by the prominent desmosomes, and the plasma membrane contacted with connective sheath were highly infolded. In cytoplasm, the most of the cell organelles, such as rod-like mitochondria, rough surfaced endoplasmic reticulum, ribosome were developed. As the stages advance from larva to pupa, general feature of the secreting cells were retained, but structural changes of the various cytoplasmic organelles-ribosome, rough surfaced endoplasmic reticulum, mitochondria, Golgi apparatus, lamellar body, and vesicle-were noted. In the perinuclear cytoplasm of the secreting cells at the stage of 6 day old 5th instar larva, it is peculiar that only a large amount of ribosomes were distributed and the other organelles were retreated from the juxtanuclear region. Just before and after spining cocoon, these features were more remarkable. Rough surfaced endoplasmic reticulum were gradually increased from the stage just before spining cocoon to the pharate pupa. Rod-like mitochondria with irregular cristae and the matrix showing low density were distributed throughout the cytoplasm in the secreting cells of the 4 day old 5th instar larva. Sometimes, longitudinally distended and curved mitochondria were observed. At the stage of pharate pupa, most of mitochondria were deformed. The rod-like mitochondria of the secreting cells of pupal prothoracic gland were narrower than those of 4 day old 5th instar larva, and the electron density of the mitochondrial matrix is increased in pupa. Golgi apparatus were a few in number in both stages, last instar larva and spining cocoon. In stages of the pharate pupa, the Golgi apparatus were frequently observed. Cytoplasmic vesicles were observed for the first time in the secreting cells of one day after spining cocoon, and the number and the size of cytoplasmic vesicles were distinctly increased inpharate pupa and just after pupation. In the secretory cells of the PG, it in concluded that the RER was closely related to syntheting the enzymes seem to produce the ecdysone.

• Applied Microscopy
• /
• v.32 no.3
• /
• pp.213-222
• /
• 2002

Histology and ultrastructure of the mantle epidermis in the ark shell, Scapharca broughtonii are described using light and electron microscopy. The mantle of the ark shell is composed of outer epidermis, connective tissue and inner epidermis. Both epidermis are simple and consists of supporting cells, ciliated cells and secretory cells. Connective tissue is composed of mainly collagen and muscle fibers. The supporting cells in the inner epidermis are usually columnar and covered with microvilli. The ciliated cell have cilia and microvilli on the free surface, and numerous tubular mitochondria are observed in the apical cytoplasm. Secretory cells are mainly observed in the outer epidermis, and it can be divided into four types of A, B, C and D with morphological features of the secretory granules. Type A cells of mucous cell are found in the marginal and central mantle. And these cells contains numerous secretory granules of non-bounded and low electron density. Type B cells contains numerous rough endoplasmic reticula, well-developed Golgi complex and secretory granules of membrane-bounded and high electron density. Secretory granules of type C cells are divided into fibrous core layer and homogeneous peripheral layer. Type D cells are found in the outer epidermis of the central and umbonal mantle. And secretory granules of these cells are divided into homogeneous core layer and granular peripheral layer. This results suggest that the outer and inner epidermis of the mantle are related with shell formation and cleaning of the mantle cavity, respectively.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2001

The morphological features of neuronal dendritic spines are changed their shapes, sizes and density in response to physiological or pathological conditions . Therefore, exact analysis of spines warrants understanding of neuronal function. The size of the spine is at the borderline of resolution with light microscopy. High voltage electron microscopy Provide excellent resolution of the spines with proper stain techniques thanks to its higher resolution and penetration power. We evaluated more effective staining method for observing dendritic spines after labeling Purkinje cells with anti-calbindin 28 kD immunohistochemistry or Golgi staining methods. 4 fm thickness sections were observed with high voltage electron microscopy and some morphometric analyses were performed. Both Golgi staining and immunohistochemistry revealed the detail structures of the Purkinje cell such as soma, dendrites, and dendritic spines. High voltage electron micrographs with Golgi staining provide more precise morphology and are easy to measure. Average density of spine is $24.5{\pm}3.6/10{\mu}m$ and its length is $1.12{\pm}0.22{\mu}m$. For quantitative analysis of the spines, high voltage electron, micrographs with Golgi staining are more effective. This preliminary result is expected to be useful for further study of spine plasticity in various conditions.

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.185-198
• /
• 2007

Spermiogenesis in Japanese white-toothed shrew. Crocidura dsinezumi was investigated by transmission electron microscope. Spermiogenesis was divided into 12 phases 14 steps, based on the morphological features of the nucleus and change of organelles in cytoplasm. The nucleus of spermatids in Golgi (step $1{\sim}2$) phase were spherical; however, they were changed into oval in the cap (step $3{\sim}6$) phase. Flagellum appeared in the middle of acrosomal phase; on the other hand, slender and long spermatid head was formed in maturation phase. The head of spermatids faced the lumen in step 1 to step 6 (from Golgi to cap phase), but, in step 7 to step 14 (from acrosomal to spermiation phase), it turned its head to the basal lamina of the seminiferous epithelium. The nucleus and acrosome were elongated maximally in step 10. The condensation of chromatin started in late acrosomal (step 10) phase, and it was completely finished and homogenized in the middle of maturation (step 12) phase. Multivesicular body appeared near the acrosomal vacuole during the middle cap (step 5) phase, and a large number of them were observed near the Golgi apparatus in the late cap (step 6) phase. Considering all the results, the spermiogenesis might be useful information to analyse the differentiation of spermatogenic fells.

• Parasites, Hosts and Diseases
• /
• v.34 no.1
• /
• pp.1-6
• /
• 1996

Mccroorchis spinuLosw Ando, 1918 (Digenea: Nanophyetidael is redescribed based on adult flukes recovered from experimental mice, rats and cats which were fed with metacercariae encysted in the muscle of the crayfish, Cambnroines similis. A total of 117 adult flukes were harvested from the small intestine of the experimental animals at S-21 days post-infection. The worm recovery rate was 31-37%, not significantly different among the three kinds of animals. The metacercariae were round, 0.18 mm in average diameter, encysted with two layers of thick walls, and possessing a stylets on the oral sucker and Y- shaped exc retory bladder. The adult flukes were oval, 0.66-0.71 mm long and 0.36-0.41 mm wide, and characterized by the presence of a stylet on the oral sucker, variable location of the ovary near the mid-portion of the body, bilobed seminal vesicle, and anterolateral location of two testes. These morphological features were a little different from the original description, hence, an emended version of M. spinulosw was given. M. spinuLosw is a new intestinal trematode of animals and possibly man in Korea.

• Korean Journal of Veterinary Research
• /
• v.39 no.3
• /
• pp.628-634
• /
• 1999

We have studied, by a nonisotopic in situ end-labeling(ISEL) technique, frequency of apoptosis in the external granular layer(EGL) of the cerebellum of immature mice by ${\gamma}$-rays irradiation from $^{60}Co$ or diagnostic ultrasound exposure. The total number of normal cells and cells showing morphological features of apoptosis were counted. The frequency of apoptotic cells was expressed as a percentage of the total number of cells in EGL. The extent of changes following 200 cGy(1090 cGy/min) was studied at 2, 4, 6, 8, 12, or 24 hours after exposure. The maximal frequency was found 6~8 hours after exposure. The immature mice that received 18, 36, 54, 108, 198, 396 cGy of ${\gamma}$-rays or diagnostic ultrasound(7.5MHz, 4.2mW, $I_{SPTA}=7.9mW/cm^2$, $I_{SPTA}=114.3W/cm^2$) for 10 or 30 minutes were examined 6 hours after irradiation. Measurements performed after ${\gamma}$-ray irradiation showed a dose-related increase in apoptotic cells in each of the mice studied. The dose-response curves were analyzed by a linear-quadratic model ; frequency of apoptotic cell in the EGL was y = $(0.1349{\pm}0.01175)D$+$(-0.0001522{\pm}0.0000334)D^2$+0.048($r^2$ = 0.981, D = dose in cGy). In the experiment of ultrasound exposure, the frequency of apoptotic cell was $0.106{\pm}0.130$(10 minutes exposure) and $0.167{\pm}0.220$(30 minutes exposure). We estimated the relative dose of the yield from the experiment with ultrasound by substituting the yield from ultrasound exposure into the curve from the ${\gamma}$-irradiation. The relative dose of ultrasound exposure compared with ${\gamma}$-irradiation were 0.432 cGy(10 minutes exposure) and 0.885 cGy(30 minutes exposure). We have found that there is no evidence to indicate that diagnostic ultrasound involves a significant risk.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.1-5
• /
• 2007

The Precesses for leaf development in dicotyledonous plants are surprisingly complex, while the mechanism of controlling and coordinating them is poorly understood. To characterize the fundamental features of the leaf development of Arabidopsis, we first attempted to isolate mutants that alter leaf morphology. Here, leaf morphological mutant of Arabidopsis, lanceolatal (lan1) which has small and narrow leaves have isolated and characterized. To clarify the function of LAN1 in organ development, we characterized lan1-7 mutant using an anatomical and genetic approach. The lan1-7 mutant had reduced size of foliage leaves and reduced dimensions of stems. A reduction both in cell size and in cell number was evident at the cellular level in the lan1 mutant, revealing that LAN1 gene appears to affect cell division at an earlier stage and cell elongation throughout the development of leaf primordia. from the analysis of heterogeneous plant with lan1 mutation and 35S-AG transgenic plant, AG gene is revealed to regulate leaf morphology under the control of 35S promoter. Thus, MADS-box gene was revealed to have some relationship to that of LAN1 gene at certain stage in leaf development processes.

• Korean Journal of Plant Taxonomy
• /
• v.41 no.4
• /
• pp.345-352
• /
• 2011

The morphological characters of Scrophularia kakudensis Franch. and its relatives were examined. The major features of S. kakudensis were determined to resolve the taxonomic confusion with the closely related taxa of S. kakudensis var. microphylla, S. pilosa and S. cephalantha. S. kakudensis is characterized by its flowering in Jul. to Sep., the node numbers on a stem, the size of the leaves, the development of inflorescences and the presence of glandular trichomes on its stems and leaves. S. cephalantha is distinct from S. kakudensis by the earlier flowering season, fewer node numbers on a stem, and fewer numbers of flowers on shorter rachis. Smaller sizes of S. kakudensis var. microphylla, considered to be a problematic character previously, are stable and distinctive from other taxa in the natural habitats of the multiple populations investigated in the study. Therefore, the taxon should remain as a variety of S. kakudensis. An examination of the diagnostic characteristics of S. pilosa, such as its inflorescence type and the presence of a stem with pubescence, does not provide sufficient distinction from S. kakudensis. A type specimen and habitat survey also support the merging of the two taxa. S. pilosa should be treated as a synonym of S. kakudensis, because it is considered to be a misidentification of S. kakudensis.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.170-187
• /
• 2010

Much interest on the thermoplastic elastomers (TPEs) has recently been attracted in commercial fields as well as scientific and applied researches. The TPEs have their own characteristic area especially in relation with block copolymers as well as many other polymeric materials, since they show interesting features displayed by the conventional vulcanized rubber, and at the same time, by the thermoplastics. In addition, they are characterized by a set of interesting properties inherent to block and graft copolymers, variety of blends and vulcanized materials. The importance of TPE as organic materials can be evaluated by the number of published reports (papers, patents, technical reports, etc). The input of the concept 'thermoplastic elastomer' to SciFinderScholar yields 18,508 results between 1939 and July 10, 2010, and the number increased exponentially after the mid of 1990. For the suitable introduction of the TPE, historic, scientific, technical and commercial considerations should be taken into account. This review article starts with a brief discussion on historical considerations, followed by a introduction of the main preparations and analytical techniques utilized in chemical, structural, and morphological studies. The properties, processing tools, the position among organic materials, and applications of TPEs are also briefly reviewed. Finally, the most probable trends of their future development are discussed in a short final remarks.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.359-369
• /
• 2005

It has been suggested that morphologic characteristics of the periodontium are partly related to the shape and form of the teeth. Furthermore, the severity of symptoms of periodontal disease have been proposed to differ among these various morphologic entities or "biotypes". The purpose of the present study was to examine the relationship between the form of the crowns in the maxillary anterior tooth segment and (1) a group of morphological characteristics and (2) the thickness of the gingiva. The thickness of gingiva was measured by ultrasonic device(SDM). 100 subjects devoid of symptoms of destructive periodontal disease were examined regarding, e.g., probing depth, gingival recession, width of keratinized gingiva, thickness of the keratinized gingiva. From maxillary study cast, the width(at the apical third-CW) and the length(CL) of the crowns of the 6 anterior teeth were determined. A CW/CL-ratio was calculated for each tooth and averaged for each tooth region. The individual mean CW/CL-ratio values for the central incisors were ranked. The 10 subjects ranked highest and the 10 ranked lowest were selected as having either a long-narrow(group N) or a short-wide(group W) form of the crown of the tooth. The data for each of the examined parameters were averaged for each tooth region in each subject and mean values for subjects in groups W and N were compared using the Student t-test. Stepwise multiple regression analysis, including data from the whole sample, was performed for each tooth region with the thickness of the free gingiva as the dependent variable. The results from the analyses demonstrated that individuals with a long-narrow form of the central incisors displayed, compared to individuals with a short-wide crown, form (l) a narrow zone of keratinized gingiva, (2) a pronounced "scalloped" contour of the gingival margin. There was no significant difference between groups N and W with respect to the thickness of the keratinized gingiva. The CW/CL-ratio data revealed that a certain form of the crowns in the central incisors was accompanied by a similar form in the lateral incisors and canine tooth region. The regression analyses demonstrated that the thickness of the keratinized gingiva in central, lateral incisors and canines was significantly related to the width of the keratinized gingiva.