• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.1-7
• /
• 2018

This paper is analyzed for the thermal characteristics(1 year) of the 6 components(DC breaker, DC filter(including capacitor and discharge resistance), IGBT(Insulated gate bipolar mode transistor), AC filter, AC breaker, etc.) of a photovoltaic power generation-based PCS(Power conditioning system) below 20 kW. Among the modules, the discharge resistance included in the DC filter indicated the highest heat at $125^{\circ}C$, and such heat resulting from the discharge resistance had an influence on the IGBT installed on the rear side the board. Therefore, risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet is conducted for classification into top 10 %. According to thermal characteristics and FMEA, it is necessary to pay attention to not only the in-house defects found in the IGBT, but also the conductive heat caused by the discharge resistance. Since it is possible that animal, dust and others can be accumulated within the PCS, it is possible that the heat resulting from the discharge resistance may cause fire. Accordingly, there are two options that can be used: installing a heat sink while designing the discharge resistance, and designing the discharge resistance in a structure capable of avoiding heat conduction through setting a separation distance between discharge resistance and IGBT. This data can be used as the data for conducting a comparative analysis of abnormal signals in the process of developing a safety device for solar electricity-based photovoltaic power generation systems, as the data for examining the fire accidents caused by each module, and as the field data for setting component management priorities.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.322-323
• /
• 2015

Traditional rotation type large beacon was characterized by frequent failure, long repair time and high cost etc. These problems are caused by traditional light sources(metal halide lamps or tungsten halogen lamps). In order to solve these problems, IALA standards-based(efficiency and reliability) large LED beacon technologies are needed. we developed by applying a LED. The object of the this project, to design a reflective optics and the high power LED lighting engine module. And to develop a rotational speed control system for controlling flash pattern of beacon. As a result, to develop of LED beacon for landfall mark that distance to reach the light 20NM to 27NM.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.769-775
• /
• 2016

Characteristics of a wireless sensor powered by the IDE (interdigitated electrode) embedded piezoelectric cantilever generator were analyzed in order to evaluate its potential for use in wireless sensor applications. The IDE embedded piezoelectric cantilever was designed and fabricated to have a self-resonance frequency of 126 Hz and acceleration of 1.57 G, respectively, for the mechanical resonance with a practical conveyor system in a thermal-power plant. It produced maximum output power of 2.81 mW under the resistive load of $160{\Omega}$ at 126 Hz. The wireless sensor module is electrically connected to a rectifier capacitor with capacity of 0.68 farad and 3.8 V for power supply by the piezoelectric cantilever generator. The unloaded capacitor could be charged as a rate of approximately $365{\mu}V/s$ while the capacitor exhibited that of 0.997 mV/min. during communication under low duty cycle of 0.2%. Therefore, it is considered that the fabricated IDE embedded piezoelectric cantilever generator can be used for wireless sensor applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.413-416
• /
• 2017

The development of the internet, which is due to the advent of the fourth industrial revolution, has been slowly affecting our lives. Based on this trend, various products have recently emerged, and have yet to be developed in the context of identifying the dangers of infant babies. Increasingly, children are experiencing problems with detecting and responding to children's lives because of their daily living noise and housekeeping activities. This project attempts to develop a raspberry pie and an audiovisual sensor module to avoid the risk of preventing unwanted behavior from tripping the child's sudden behavior in everyday life. Further, it was designed to provide convenience to the guardian's convenience by implementing the smartphone app with the Wifi signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.58-70
• /
• 1990

This paper describes a VLSI implementation of real-time two dimensional DCT processor for the subprimary rate video codec system. The proposed architecture exploits the parallelism and concurrency of the distributes architecture for vector inner product operation of DCT and meets the CCITT performance requirements of video codec for full CSIF 30 frames/sec. It is also shown that this architecture satisfies all the CCITT IDCT accuracy specification by simulating the suggested architecture in bit level. The efficient VLSI disign methodology to design suggested architecture is considered and the module generator oriented design environments are constructed based on SUN 3/150C workstation. Using the constructed design environments. the suggensted architecture have been designed by double metal 2micron CMOS technology. The chip area fo designed 8x8 2-D DA-DCT (Distributed Arithmetic DCT) processor is about 3.9mmx4.8mm.

• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.81-88
• /
• 2013

The increase of the smartphone users has popularized the mobile payment and the mobile credit card users are rapidly getting increased. The mobile credit cards that currently used provide its users with the service through downloading mobile credit card information into USIM. The mobile credit card saved in USIM has the minimized information for the security and is based on PKI. However certificate-based payment system has a complicated procedure and costs a lot of money to manage the certificates and CRL(Certificate Revocation List). Furthermore, It can be a obstacle to develop local e-commerce in Korea because it is hard for foreigners to use them. We propose the secure and efficient mobile credit card payment protocol based on certificateless signcryption which solve the problem of certificate use.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.167-169
• /
• 2010

Electronic control units for propulsion systems are devices which compute control algorithm by processing the systems' internal sensor signals. Due to the effect of transmission between sensors and a control unit, previous analog systems have drawbacks of signal attenuation and susceptibility to noises. However, a digital sensor can be less influenced by the electrical cable line as it includes sensor, AMP, and AD converter in one module. In addition, it can reduce the process time for control algorithm because extra S/W filtering process is not needed. The current study shows how to process signals for an electronic control unit using digital sensors.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2014

In this study, the effect of the automotive haptic-seat technology which can transmit the driving information by the vibro-stimulus from the seat was investigated to overcome previous system's limitation relied on the visual and audial method and to help handicap driving. A prototype haptic seat covers with 30 coin-type motors and driver module were developed for this sake. A driving simulator on the 6-DOF motion-base was used for driving situation and we executed the seat vibro-stimulus test with 10 young participants who have normal tactile sense. The haptic recognition ratio by 30 locations was measured and analyzed in the result. The intensity of vibro-stimulus was adjusted by input voltage of motors (1.5V,2.5V,3.5V). All vibro-stimulus locations at 2.5V and 3.5V could be recognized by all participants and even in the lowest recognition ratio of 1.5V. The results showed that the seat vibration stimulus could be useful to transfer the drivers' information while driving.

• Journal of The Korean Association of Information Education
• /
• v.14 no.3
• /
• pp.437-447
• /
• 2010

The purpose of this thesis was to design and develop an effective e-PBL(Problem-Based Learning) for cultivating consciousness of information and communication ethics. The proposed e-PBL is based on PBL which is one of the constructivism teaching-learning theories. Online learning and face-to-face classes were systematically combined for achieving the teaching-learning goals. And the main module for online learning run on Moodle, an open source learning management system. To examine educational effectiveness of the proposed e-PBL, an experimental study was conducted through the education content and method to the subject of two class in the second-grade of university located in OO city. For experiment 60 students(treatment group=30, control group=30) are participated. And they were randomly assigned to one of ten subgroups, comprising of six students, respectively. The results of this study showed that the education using proposed e-PBL is more effective in cultivating consciousness of information and communication ethics and learners responded positively than the education using traditional face-to-face PBL learning method.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.1-10
• /
• 2007

Branch prediction accuracy is critical for the overall system performance. Branch miss-prediction penalty is the one of the significant performance limiters for improving processor performance, as the pipeline deepens and the instruction issued per cycle increases. In this paper, we propose "Dynamic Per-Branch History Length Fitting Method" by tracking the data dependencies among the register writing instructions. The proposed solution first identifies the key branches, and then it selectively uses the histories of the key branches. To support this mechanism, we provide a history length adjustment algorithm and a required hardware module. As the result of simulation, the proposed mechanism outperforms the previous fixed static method, up to 5.96% in prediction accuracy. Furthermore, our method introduces the performance improvement, compared to the profiled results which are generally considered as the optimal ones.