• Communications of the Korean Mathematical Society
• /
• v.15 no.2
• /
• pp.257-261
• /
• 2000

Northcott and Mckerrow proved that if R is a left noe-therian ring and E is an injective left R-module, then E[x-1] is an injective left R[x]-module. In this paper we generalize Northcott and McKerrow's result so that if R is a left noetherian ring and E is an in-jective left R-module, then E[x-S] is an injective left R[xS]-module, where S is a submonoid of N (N is the set of all natural numbers).

• ETRI Journal
• /
• v.38 no.4
• /
• pp.645-653
• /
• 2016

This paper demonstrates the performance of a metal-substrate power module with multiple fabricated chips for a high current electrical application, and evaluates the proposed module using a 1.5-kW sinusoidal brushless direct current (BLDC) motor. Specifically, the power module has a hybrid structure employing a single-layer heat-sink extensible metal board (Al board). A fabricated motor driver IC and trench gate DMOSFET (TDMOSFET) are implemented on the Al board, and the proper heat-sink size was designed under the operating conditions. The fabricated motor driver IC mainly operates as a speed controller under various load conditions, and as a multi-phase gate driver using an N-ch silicon MOSFET high-side drive scheme. A fabricated power TDMOSFET is also included in the fabricated power module for three-phase inverter operation. Using this proposed module, a BLDC motor is operated and evaluated under various pulse load tests, and our module is compared with a commercial MOSFET module in terms of the system efficiency and input current.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.424.2-424.2
• /
• 2016

Solar cell converts light energy to electric energy. But a solar cell generates low power, PV module is fabricated by connected in series with dozens of solar cell. Owing to solar cell connected in series, power of PV module is influenced by shading or mismatch power of solar cells. To prevent power loss of PV module by shading or mismatch current, Bypass diodes are installed in PV module. Bypass diode operating reverse voltage by shading or mismatch power of solar cells bypass mismatch current. However, bypass diode in module exposed outdoor is easily damaged by surge voltage. In this paper, we confirm characteristics variation of PV module with damaged bypass diode. As a result, power of PV module with damaged bypass diode is reduced and Temperature of that is increased.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.95-100
• /
• 2007

Channel letter용 High Power LED Module 개발하기 위하여, 1W 백색(단색) LED 1EA LED Module과 1W 백색(단색) LED 3EA LED Module, 3W RGB LED 1EA LED Module에 대한 3종의 제품 개발하고, 고효율 RGB LED SMPS 회로 설계, 광색 가변을 위한 RGB LED 최적 배치 및 렌즈 설계, 고출력 1W LED Module 방열 설계 및 기구 개발, SMPS 회로 및 RGB LED 배열 회로 통합 시제품 직접 제작하였다, 신뢰성 평가 및 성능 시험 등을 실시하였으며, T자형 Channel letter에 기존 고휘도 LED Module과 개발된 고출력 LED Nodule을 동시에 적용한 결과, 기존 고휘도 LED Module를 사용하였을 경우에는 $1W{\times}10$개로 10W의 전력을 소비하였으나 개발된 고출력 LED Nodule은 $3W{\times}3$개로 9W의 전력을 소비하였으며 1W의 에너지가 절감되었음에도 불구하고 평균 휘도는 약 2.5배, 균제도는 1.43 배가 더 우수한 결과를 얻었다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.4
• /
• pp.20-27
• /
• 1996

The main purpose of this research is to develop a program supporting landscape planting design on AutoCAD basis using AutoLISP and DCL language. Current CAD use in landscape architecture field is mainly focused on customizing plant symbols for supporting two dimensional drafting rather than three dimensional consideration. This program is composed of eight module a such as PLANT module for inserting plant symbols, LABEL module for labeling task, SIMULATION module for simulating plant growth and seasonal color variation, TABLE module for generating plant table automatically, BUILDING module, BLOCK module, UTILITY module for deleting, transforming, shading symbols and DB MANAGER module for manipulating data. Design automation ability using automatic object recognition technique in this program allows AutoCAD to be used as a design tool in addition to its main role as a drafting tool through supporting landscape designers to generate many alternatives in the early phase of design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1231-1236
• /
• 2007

Balance Shaft Module is module parts that is installed to vehicles engine to reduce noise and vibration of vehicles engine. Balance Shaft Module's performance exerts important influence on performance of engine. Therefore, must be able to warrant quality and performance of Balance Shaft Module. Existing product found and revised error at continuous process of production, and estimated failure mode in Balance Shaft Module. Previous method hard to secure product that performance is excellent, and bring a lot of damages economically. Therefore, development of inspectin system for quality inspection of parts and performance test of assembly is essential in Balance Shaft Module. In this study, represented development process of automatic dynamic inspection system to test performance and detect breakdown of Balance Shaft Module that is producing in Dongbo.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.4
• /
• pp.973-990
• /
• 2020

For the question "when is E(_RR) a flat left R-module for any ring R?", in this paper, we deal with a class of modules partaking in the hierarchy of injective and cotorsion modules, so-called Harmanci injective modules, which turn out by the motivation of relations among the concepts of injectivity, flatness and cotorsionness. We give some characterizations and properties of this class of modules. It is shown that the class of all Harmanci injective modules is enveloping, and forms a perfect cotorsion theory with the class of modules whose character modules are Matlis injective. For the objective we pursue, we characterize when the injective envelope of a ring as a module over itself is a flat module.

• Kyungpook Mathematical Journal
• /
• v.50 no.1
• /
• pp.101-107
• /
• 2010

A module M is said to satisfy the $EC_{11}$ condition if every ec-submodule of M has a complement which is a direct summand. We show that for a multiplication module over a commutative ring the $EC_{11}$ and P-extending conditions are equivalent. It is shown that the $EC_{11}$ property is not inherited by direct summands. Moreover, we prove that if M is an $EC_{11}$-module where SocM is an ec-submodule, then it is a direct sum of a module with essential socle and a module with zero socle. An example is given to show that the reverse of the last result does not hold.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.449-452
• /
• 2005

For home networking system with a function of air quality monitoring, a wireless sensor module with several air quality monitoring sensors was developed for indoor environment monitoring system in home networking. The module has various enlargements for various kinds of sensors such as humidity sensor, temperature sensor, CO2 sensor, flying dust sensor, and etc. The developed wireless module is very convenient to be installed on the wall of a room or office, and the sensors in the module can be easily replaced due to well designed module structure and RF connection method. To reduce the system cost, only one RF transmission block was used for sensors' signal transmission to 8051 microcontroller board in time sharing method. In this home networking system, various indoor environmental parameters could be monitored in real time from RF wireless sensor module. Indoor vision was transferred to client PC or PDA from surveillance camera installed indoor or desired site. Web server using Oracle DB was used for saving the visions by web-camera and various data from wireless sensor module.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.300-302
• /
• 2006

Middleware offers function that user application program can transmit data independently of network device. Connection management about network connection of module is important for normal service of module base personal robot. Unpredictable network disconnection is influenced to whole robot performance in module base personal robot. For this, Middleware must be offer two important function. The first is function of error detection and reporting about abnormal network disconnection. Therefore, middleware need method for network error detection and module management to consider special quality that each network device has. The second is the function recovering that makes the regular service possible. When the module closed from connection reconnects, as this service reports connection state of the corresponding module, the personal robot resumes the existing service. In this paper proposed method of network connection management for to support fault tolerant about network error of network module based personal robot.