• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.3
• /
• pp.147-154
• /
• 2014

In the context of an increasing need for safety in concrete structures under blast and impact loading condition, the behavior of concrete under high strain rate condition has been an important issue. Since concrete subjected to impact loading associated with high strain rate shows quite different material behavior from that in the static state, several material models are proposed and used to describe the high strain rate behavior under blast and impact loading. In the process of modelling high strain rate conditions with these material models, mesh dependency in the used finite element(FE) is the key problem because simulation results under high strain-rate condition are quite sensitive to applied FE mesh size. This paper introduces an criterion which can minimize the mesh-dependency of simulation results on the basis of the fracture energy concept, and HJC(Holmquist Johnson Cook) model is examined to trace sensitivity to the used FE mesh size. To coincide with the purpose of the perforation simulation with a concrete plate under a projectile(bullet), the residual velocities of projectile after perforation are compared. The analytical results show that the variation of residual velocity with the used FE mesh size is quite reduced and accuracy of simulation results are improved by applying a unique failure strain value determined according to the proposed criterion.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.2
• /
• pp.93-106
• /
• 2021

In general, segment lining tunnel refers to a tunnel formed by connecting precast concrete segments as a ring and connecting such rings to each other in the longitudinal direction of the tunnel. As the structural properties of the segment lining is highly dependent on the behavior of the segment joints, thus correct modelling of joint behavior is crucial to understand and design the segment tunnel lining. When the tunnel is subjected to ground loads, the segment joint behaves like a hinge that resists rotation, and when the induced moment exceeds a certain limit of the rotation then it may enter into non-linear field. In understanding the effect of the segment joint on the lining behavior, a moment-rotation relationship of the segment joint was explored based on the Japanese practice and Janssen's approach commonly used in the actual design. This study also presents a method to determine the rotational stiffness of joint refer to the bearing strength. The rotation of the segment joint was estimated in virtual design conditions based on the existing models and the proposed method. And the sectional force of the segment lining and joint were calculated along with the estimated rotation. As the rotation at the segment joint increases, the joint contact area decreases, so the designer have to verify the segment joint for bearing strength as well. This paper suggests a consistent method to determine the rotational stiffness and bearing strength of joints.

• The Korean Journal of Franchise Management
• /
• v.13 no.2
• /
• pp.53-66
• /
• 2022

Purpose: How to build the attitude on brand is very important, because it affects the positive word of mouth and revisit intention. Brand attachment, brand name, and image congruence play important role on consumer behavior in terms of reinforcing consumers' perception of food service companies and differentiating them from competing brands. Following the planned behavior theory, this paper examines the effect of linking brand attitude to word-of-mouth and revisit intentions in the restaurant sector. Research design, data, and methodology: This paper examines the structural relationship among brand attachment, brand name, image congruence, brand attitude, WOM, and revisit intention. In order to test the purposes of this study, research model and hypotheses were developed. The questionnaire items were modified and used according to the content of this study based on previous studies. All constructs were measured by multiple items tested and developed in the previous research. The study is based on the quantitative method and considered 519 questionnaires fulfilled by customers of restaurants. The data were explored employing the partial least square-structural equation modelling (PLS-SEM). Frequency analysis was conducted to identify the general characteristics of the survey subjects. To measure the reliability and validity of the measurement tools, confirmatory factor analysis was conducted. Structural model analysis was conducted to verify the research model. Result: The findings demonstrate that brand attachment and brand name had positive effects on attitude while image congruence did not have. Also, attitude had positive effect on WOM and revisit intention. Conclusions: This study expands the literature about WOM and revisit intentions. This study expands prior research in a similar field to which the theory of planned behavior (TPB) is applied, and reveals that brand attachment, brand name, and brand image congruence play an important role in developing brand attitude that affect revisit intention and WOM. And provide guidelines on how to enhance competitiveness in the restaurant sector based on understanding of linking brand attitude to customer loyalty and repeat business. By putting into practice these suggestions in the restaurant industry, brands can easily build up their attitude and boost a positive WOM and the intention to revisit.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.155-173
• /
• 2022

Purpose: This study was undertaken to update the Nutrition Quotient for Elderly (NQ-E), which reflects dietary quality and behavior among Korean older adults. Methods: The first 29 items of the measurable food behavior checklist were obtained from a previous NQ-E checklist, recent literature reviews, and national nutrition policies and recommendations. One-hundred subjects (50 men and 50 women) aged ≥ 65 years living in the Seoul Metropolitan Area, including Gyeonggi Province, completed a pilot survey from March to April 2021. Based on the results of the pilot study, we conducted factor analysis and frequency analysis to determine whether the items of the survey were properly organized and whether the distribution of answers for each evaluation item was properly distributed. As a result, we reduced the number of items on the food behavior checklist and used 23 items for the national survey. Nationwide, 1,000 subjects (472 men and 528 women) aged > 65 years, completed the checklist survey, which was applied using a face-to-face survey method from May to August 2021. The construct validity of the NQ-E 2021 was assessed using confirmatory factor analysis, LISREL. Results: Seventeen food behavior checklist items were selected for the final NQ-E 2021. Checklist items addressed three factors: balance (8 items), moderation (2 items), and practice (7 items). Standardized path coefficients were used as the weights of items to determine nutrition quotients. NQ-E and three-factor scores were calculated according to the weights of questionnaire items. Conclusion: The updated NQ-E 2021 produced by structural equation modelling provides a suitable tool for assessing the dietary quality and behavior of Korean older adults.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.139-152
• /
• 2008

A series of numerical experiments were carried out to simulate the rock cutting behavior by TBM disc cutter in a given took condition. AUTODYN-3D, a commercial program capable of simulating three-dimensional dynamic failure, was utilized to carry out the numerical tests over four different disc cutter spacing conditions. After modelling three-dimensional geometries of disc cutter and rock specimen, the linear cutting tests by a disc cutter were simulated for eight different types of rocks. The numerical result, that is the optimum cutter spacing for isotropic rocks had the good agreements with those from linear cutting test. However, for relatively anisotropic or jointed rocks, the specific energy obtained from the numerical tests was almost two-times bigger than the real linear cutting results. Therefore, to simulate cutting procedures for anisotropic rocks realistically, further studies would be necessary.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.29-37
• /
• 2007

This study deals with displacement analysis of anisotropic folded structures with triangular elements and quadrilateral elements. When folded plates are analyzed, triangular elements as well as quadrilateral elements are needed for conveniences of modelling. However, using triangular elements is not a simple problem. A simple formulation is presented which allows a quadrilateral element to degenerate into a triangular element. Therefore it can easily be used for computational simplicity and avoided complexities on mixed use of triangular element and quadrilateral element. In this paper, a high-order shear deformation theory using only Lagrangian interpolation functions and drilling degrees of freedom for folded plates are utilized for more accurate analysis. Especially, various results of anisotropic laminated and folded composite structures with triangular element and quadrilateral element show the structural behavior characteristics of them.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.1
• /
• pp.68-78
• /
• 2009

In this paper, the electrostatic charging and discharging mechanism, and its effects in space plasma environment are reviewed and the system design control documents, ESD analysis tools and modelling techniques, and the SPIS program in Europe are introduced. A design of the satellite system against the electrostatic discharge (ESD) effects in space plasma environments is carefully taken into account at the early stage of development. In a view of the space system design, it really depended on the mission of system, electrical and mechanical configuration, system operation, and orbit condition. Behavior of the electrons and the ions in those environments may be occurred the sever problem to the satellite operation. So it is carefully understood for implementation of the satellite system. By this reason, the space environments and its effects have been comprehensively studied in U.S.A and Europe.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.4
• /
• pp.1-8
• /
• 2005

Plasma researches using parallel-plate electrodes are widely used in semiconductor application such as etching and thin film deposition. Therefore, a quantitative understanding and control of plasma behavior are becoming increasingly necessary because their important applications and simulation techniques have been actively carried out in order to solve such problems above. In this paper, we developed a two-dimensional(2D) self-consistent fluid model, because 2D models can deal with real reactor geometries. The fluid model is based on particle continuity equations for taking account of an electrode system in a cylindrical geometry. An pure Ar gas was used at 500[mTorr] and radio-frequency (13.56(MHz)). Four models were simulated under the different electrode geometries which have chamber widths of 5.25, 6.0, 8.0, and 10.0[cm] and we compared their results with each other. Plasma uniformity and a do self-bias voltage were also discussed.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.226-233
• /
• 2013

This study examines determinants of film consumption. Using structural equation modelling, this study explores some factors that explained film consumption based on film tastes and information seeking and socio-demographic factors. The major results are as follows: firstly, the major factor for explaining film consumption was individual tastes for films. The higher the degree of tastes for films, the greater the degree of film consumption. Secondly, there were significant relationships between tastes for films and film related information seeking such as internet search behavior and the use of film blogs. More specifically, the use of film blogs partially explained the degree of film consumption. Thirdly, a demographic factor like gender was highly correlated to film consumption. However, an income factor was not correlated to fim consumption. In conclusion, the degree of film consumption was determined by tastes for flims, the use of film blogs and gender factors.

• Computers and Concrete
• /
• v.18 no.5
• /
• pp.1041-1051
• /
• 2016

In this study, the construction of a reinforced concrete bridge pier was analyzed from durability point of view. The goal of the study is to analyze the crack iniation condition due to construction and present some recommendations for construction conditions of the reinforced concrete bridge pier. The bridge is located at the western port area of Shenzhen, where the climate is high temperature and humidity. To control the cracking of concrete, a construction simulation was carried out for a heat transfer problem as well as a thermal stress problem. A shrinkage model for heat produced due to cement hydration and a Burger constitutive model to simulate the creep effect are used. The modelling based on Femmasse(C) is verified by comparing with the testing results of a real underground abutment. For the bridge pier, the temperature and stress distribution, as well as their evolution with time are shown. To simulate the construction condition, four initial concrete temperatures ($5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$) and three demoulding time tips (48h, 72h, 96h) are investigated. From the results, it is concluded that a high initial concrete temperature could result in a high extreme internal temperature, which causes the early peak temperature and the larger principle stresses. The demoulding time seems to be less important for the chosen study cases. Currently used 72 hours in the construction practice may be a reasonable choice.