• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.459-464
• /
• 1998

In this paper, we propose a stable fuzzy logic controller architecture for inverted pendulum,. In the design procedure, we represent the fuzzy system as a Takagi-Sugeno fuzzy model and construct a global fuzzy logic controller by considering each local state feedback controller and a supervisory controller, Unlike usual parallel distributed controller, one can design a global stable fuzzy controller without finding a common Lyapunov function by the proposed method. A simulation is performed to control the inverted pendulum to show the effectiveness and feasibility of the proposed fuzzy controller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.650-655
• /
• 2012

This paper proposed PSO-Fuzzy controller design method. We could improve the learning performance of fuzzy controller by using PSO algorithm, which had recently showed its robust of performance while solving various difficult optimization problems. In other words, our aim was to forward the controller is performance by deciding fuzzy model structure that had good performance on optimization of the controller, based on PSO. During a simulation, we could see whether the mobile robot could convergence on the final goal or not, and also see the error, and through this process, we found out that this controller is more robust than the conventional controller.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.510-512
• /
• 1999

In this paper, we present a method for the analysis and design of fuzzy controller for nonlinear systems. In the design procedure, we represent the dynamics of nonlinear systems using a Takagi-Sugeno fuzzy model and formulate the controller rules, which shares the same fuzzy sets with the fuzzy system, using parallel distributed compensation method. Then, after the feedback gain of each local state feedback controller is obtained using the existing optimal pole-placement scheme, we construct an overall fuzzy logic controller by blending all local state feedback controller. Finally, the effectiveness and feasibility of the proposed fuzzy-model-based controller design method has been evaluated through an inverted pendulum system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.851-856
• /
• 2011

In this paper, the fuzzy output-feedback controller is addressed for a discrete-time nonlinear interconnected systems with common input. The nonlinear interconnected system is represented by a T-S (Takagi-Sugeno) fuzzy model. Based on T-S fuzzy interconnected system, the fuzzy output-feedback controller is designed with common input. The stability condition of the closed-loop system is represented to the LMI (Linear Matrix Inequality) form. PEMFC model is given to show the verification of the controller discussed throughout the paper.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.423-429
• /
• 2011

This paper deals with the observer-based decentralized fuzzy controller design for nonlinear interconnected system for PEMFC. The nonlinear interconnected system is represented by a Takagi-Sugeno (T-S) fuzzy model. Based on T-S fuzzy interconnected system, the fuzzy observer and the decentralized fuzzy controller are designed. The stability condition of the closed-loop system with the proposed controller is represented to the linear matrix inequality (LMI) form, and the observer and control gain s are obtained by LMI. An example is given to show the verification discussed throughout the paper.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.123-128
• /
• 1996

In this paper, a fuzzy controller is proposed for the operation of stoker-type refuse incinerator with many kinds of uncertain factors. To build the exact mathematical model is very difficult because of the variation of physical/chemical properties of refuse as a fuel and the complexity of the combusiton process. The fuzzy controller consists of fuzzy sensor, fuzzy decision maker and tracking part. The rules based on the professional operators empirical knowledge are made for the control of the boiler evaporation rate, emission gas and refuse throughput. For the performance measure of the proposed fuzzy controller, the model of the incinerator is constructed and the simulation results are given.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.3
• /
• pp.215-223
• /
• 2002

This paper investigates the adaptive control of a fuzzy logic based speed and flux controller fur a vector controlled induction motor drive. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the model reference adaptive control(MRAC) fuzzy controller is evaluated by simulation for various operating conditions. The validity of the Proposed MRAC fuzzy controller is confirmed by performance results for induction motor drive system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1516-1520
• /
• 2005

We proposed the indirect adaptive fuzzy model based sliding mode controller to control a nonaffine nonlinear systems. Takagi-Sugano fuzzy system is used to represent the nonaffine nonlinear system and then inverted to design the controller at each sampling time. Also sliding mode component is employed to eliminate the effects of disturbances, while a fuzzy model component equipped with an adaptation mechanism reduces modeling uncertainties by approximating model uncertainties. The proposed controller and adaptive laws guarantee that the closed-loop system is stable in the sense of Lyapunov and the output tracks a desired trajectory asymptotically.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.169-172
• /
• 1999

In this paper, piecewise quadratic Lyapunov functions are used to analyze the stability of fuzzy-model-based controller. We represent the nonlinear system using a Takagi-Sugeno fuzzy model, which represent the given nonlinear system by fuzzy inference rules and local linear dynamic models. The proposed stability analysis technique is developed by dividing the whole fuzzy system into the smaller separate fuzry systems to reduce the conservatism. Some necessary and sufficient conditions for the proposed method are obtained. Finally, stability of the closed system with various kinds of controller for TS fuzzy model is checked through the proposed method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.701-708
• /
• 2017

This paper proposes an optimum design method using Teaching-Learning-based optimization for the fuzzy PID controller of Magnetic levitation rail-guided vehicle. Since an attraction-type levitation system is intrinsically unstable, it is difficult to completely satisfy the desired performance through the conventional control methods. In the paper, a fuzzy PID controller with fixed parameters is applied and then the optimum parameters of fuzzy PID controller are selected by Teaching-Learning optimization. For the fitness function of Teaching-Learning optimization, the performance index of PID controller is used. To verify the performances of the proposed method, we use a Maglev model and compare the proposed method with the performance of PID controller. The simulation results show that the proposed method is more effective than conventional PID controller.