• 시스템엔지니어링학술지
• /
• 제12권2호
• /
• pp.59-67
• /
• 2016

Recently, the increased complexity of systems has made systems engineering necessary. It is very useful for system designers to understand the whole context of the concerned system based on systems engineering. A system model can be used to describe the outcome of a system design. A system model describes the system from the viewpoint of the stakeholder's needs using the mutually exclusive and collectively exhaustive principle. A system model can be used to smoothly design a large and complicated system based on the systems engineering development process. Many companies and countries are attempting to apply model-based systems engineering, and the significance of the system model quality is increasing as system models are referenced during system development. In this paper, we propose a quality assessment method for ontology which is one of system models by focusing on the system development process. First, in this process, a system developer should explicitly show the relationship between viewpoints. Then, the system developer should select dependent rather than independent viewpoints. With dependent viewpoints, each viewpoint used to describe the system has some logical relationship. The set of viewpoints makes it possible to show, not only tangible and physical system parts, but also conceptual system parts. In this paper, we develop an ontological system model of a Japanese weather observation system. By comparing some ontological system models, we verify the effectiveness of explicitly describing the relationships between viewpoints and select dependent viewpoints.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1165-1168
• /
• 2002

Knowledge acquisition is the process that extracts the required knowledge from available sources, such as experts, textbooks and databases, for incorporation into a knowledge-based system. Knowledge acquisition is described as the first step in building expert systems and a major bottleneck in the efficient development and application of effective knowledge based expert systems. One cause of the problem is that the process of human reasoning we need to understand for knowledge-based system development is not available for direct observation. Moreover, the expertise of interest is typically not reportable due to the compilation of knowledge which results from extensive practice in a domain of problem solving activity. This is also a problem of modeling knowledge, which has been described as not a problem of accessing and translating what is known, but the familiar scientific and engineering problem of formalizing models for the first time. And this formalization process is especially difficult for knowledge engineers who are often faced with the difficult task of creating a knowledge model of a domain unfamiliar to them. In this paper, we propose an automated knowledge acquisition tool which is based on an implementation of the Inferential Modeling Technique. The Inferential Modeling Technique is derived from the Inferential Model which is a domain-independent categorization of knowledge types and inferences ［Chan 1992］. The model can serve as a template of the types of knowledge in a knowledge model of any domain.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.42-48
• /
• 2017

OCD (Operational Concept Document) is very important in system development. To develop OCD we should answer questions about, what template to use, what is the overall process to develop OCD, what kinds of diagrams we should use and how can we validate the OCD. To answer about the template we compared tow industrial guide on operational concept development and tailored it. For development process, we proposed a comprehensive process which satisfies the requirements of the project context. For use of proper diagram, we analyzed many kinds of diagrams used in representing behavior of system and choose some diagrams which best fit for our purpose. Finally we established validation criteria for operational scenario and requirement texts in operational concept documents.

• Journal of Information Technology Applications and Management
• /
• 제11권2호
• /
• pp.167-178
• /
• 2004

Different from traditional development methodologies like waterfall model, the CBD (component based development) methodology relies on a building block approach in the design and development of information system. The audit procedure and checklist for the traditional IS development methodology are required to be modified to be suitable for CBD. This research reviewed IS audit guidelines for the existing development process and analyzed multiple projects that employed the by component based development process. For the purpose of this study, we chose a governmental project and a next-generation IS project of a financial agency as sample cases. By comparing existing IS audit checklists and items actually reviewed in audit projects, this study identified appropriate check items for the CBD-centric audit program. New items were proposed as additional items such as project control in management phase, usage case and conceptual model establishment, component evaluation and design, in implementation phase, and so forth. The result of the research provides new guidelines for the audit CBD projects for the purposed of increased efficiency and qualify of application development projects.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1065-1069
• /
• 2005

The construction failures can be decreased through continuous improvement of construction process based upon the information of construction failures. Herein, the information of construction failures can be utilized as the key factor for identifying and enhancing various ineffective construction processes that can prevent failures. This research proposes a process model for the continuous improvement of construction processes by using construction failure information. Extensive reviews and analyses of literatures related to construction failures are performed to investigate its definition, type, cause, and lessons learned. This research adapts process modeling methodology and case-based reasoning for the development of the proposed CIMCP(continuous improvement model of construction process), and then suggests its framework that contains modules of case retrieval, case index, and case adaptation.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.59-67
• /
• 2019

Since it is really hard to construct process models based on prior process knowledges, various statistical approaches have been employed to build fault diagnosis models. However, the crucial drawback of these approaches is that the solutions may vary according to the fault magnitude, even if the same fault occurs. In this study, the parameter monitoring approach is suggested. When a fault occurs in a chemical process, this leads to trigger the change of a process model and the monitoring parameters of process models is able to provide the efficient fault diagnosis model. A few important variables are selected and their predictive models are constructed by partial least square (PLS) method. The Euclidean norms of parameters of PLS models are estimated and a fault diagnosis can be performed as comparing with parameters of PLS models based on normal operational conditions. To improve the monitoring performance, cumulative summation (CUSUM) control chart is employed and the changes of model parameters are recorded to identify the type of an unknown fault. To verify the efficacy of the proposed model, Tennessee Eastman (TE) process is tested and this model can be easily applied to other complex processes.

• 한국실내디자인학회논문집
• /
• 제16권4호
• /
• pp.119-126
• /
• 2007

A prototype design process visualization and guidance system, is being developed. Its purpose is to visualize the design process in more intuitive manner so that one can get an insight to the complicated aspects of the design process. By providing a tangible utility to the design process performed by the expert designers or guided by the system, novice designers will be greatly helped to learn how to approach a certain class of design. Not only as an analysis tool to represent the characteristics of the design process, the system will be useful also for learning design process. A design ontology is being developed to provide the system with a knowledge-base, representing designer's activities associated with various design information during the conceptual design process, and then to be utilized for a computer environment for design analysis and guidance. To develop the design ontology, a conceptual framework of design activity model is proposed, and then the model has been tested and elaborated through investigating the nature of the early conceptual design. A design process representation model is conceptualized based on the ontology, and reflected into the development of the system. This paper presents the development process of the visualization system, modeling of design process ontology, and how the system could be utilized for the analysis and learning of conceptual design methods using computer mediated design support environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.140-143
• /
• 2005

The hybrid CAE/CAT methods are widely applied to product development in various fields because this method can predict the response of the whole system when a part of the system is changed. Especially, the hybrid CAE/CAT method is very useful to predict tile vehicle NVH characteristics after changing some parts of the vehicle. Target parts can be established on the basis of test models and FE models of the prototype constructed in the planning stage of car development. In this study, the topic was focused on the proper test-based FBS application process to predict vehicle NVH characteristic. First, the test-based FBS method was apply to vehicle substructure and car-body. And then the test-based model was replaced with FE model to apply hybrid CAE/CAT method. The replaced FE model was modified through the optimization process. The interior noise in vehicle during the drive was predicted with Modified FE model, then the predicted results were verified by experimenting with actual modified model.

• 한국과학교육학회지
• /
• 제27권8호
• /
• pp.724-742
• /
• 2007

The purpose of this study was to develop a scientific inquiry model that makes scientific inquiry accessible to science teachers as well as students. To develop a scientific inquiry model, we investigated the research process demonstrated by ten scientists who were working at academic research institutions or industrial research institutions. We collected data through scientists' journal articles, lab meetings and seminars, and observation of their inquiry process. After we analyzed the scientists' inquiry strategies and processes of inquiry, we finally developed the Scientist's Methodology of Investigation Process model named SMIP. The SMIP model consists of four domains, 15 stages, and link questions, such as "if, why", and "how". The SMIP model stressed that inquiry process is a selective process rather than a linear or a circular process. Overall, these findings can have implication science educators in their attempt to design instruction to improve the scientific inquiry process.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.836-843
• /
• 2003

The automatic train control (ATC) system development project for the Automated Guideway Transit (AGT) system has high technical risk because the system is unmanned train control system using wireless technology which was unprecedented in train control industry of Korea. To overcome the technical risk during concept design phase of the ATC system development project, the integrated product team(IPT) carried out a reverse and reengineering process using a systems engineering design model. The generic systems engineering process is incorporated in the both reverse and reengineering process. As a result of the systems engineering effort, the IPT has built top layer systems engineering design model of the ATC subsystem. The purpose of this paper is to deliver the reverse and reengineering process which was used to develop the systems engineering design model of ATC system using a computer aided systems engineering tool. This study also shows that the model based reverse and reengineering process can reduce the technical risk by identifying the differences of requirement, functional and physical architecture between a reference system and a target system.