• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.57-62
• /
• 2009

An embedded system is a computer system designed to perform one or a few dedicated functions often with real-time computing constraints. A traditional design process of embedded systems is the development of document-centric approach, and it is difficult to develop an embedded system efficiently because communication between teams or steps is not smooth. So the Model Based Design Process are applied to the development of embedded systems. This paper will compare the Model Based Design Process and the traditional design process, and introduce example of development of vehicle device applied the Model Based Design Process.

• Electronics and Telecommunications Trends
• /
• v.32 no.6
• /
• pp.105-115
• /
• 2017

This paper describes a project - based quality management model that identifies development technologies and codes while at the same time verifying the ability to implement processes that are essential in R & D projects. In order to verify the process implemented in the R & D project implementation, there are review, checking points, and evaluating methods the process performance levels for five processes such as defining requirements which is the beginning stage of system development, testing process which is the completion stage of system development, and project management and peer review process for project management and support in the proposed project-based quality management model. For development technology and code validation, the model included the documented test cases for each requirement by the developer in the requirements definition stage, debugging and testing in the design and implementation stages, static analysis and open source licence verification procedure, and system environment. After applying the model in SW development R&D project for evaluating the process performance, and verifying the development technology and the code, the developers responded that the improvement in the development technique and the code, and upgrade of process performance level for project are more than 10%.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1029-1034
• /
• 2004

Recent engineering process requires fast development and manufacturing of the products. This paper mainly discusses the process of rapid product development (RPD) from the reverse engineering to the optimal design. A laser scanning system scans a product and the efficient data processing method reduces the scanned point data. The reduced (scanned) points model is transformed to a finite element model without the construction of a CAD model. Since CAD modeling is a time-consuming work, skipping this step can save much time. This FE model is updated from the result based on the structural characteristics from modal test of the real model. For FE model updating, Response Surface Method is adopted. Finally, the updated FE model is optimized using the reliability-based topology optimization, which is developed recently. All these processes are applied to the design of an upper part model of a cellular phone.

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.51-56
• /
• 2017

This paper presents a requirement development process using the model based systems engineering design process to the developments of the missile Seeker. SysML Model and requirement analysis templates were used as the specific execution method for applying the system engineering process. This paper will present a process for deriving the technical requirements and derived requirements using them.

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.55-60
• /
• 2015

This paper presents an SBA (simulation-based acquisition) effectiveness analysis environment using the RUP (Relational Unified Process) model. The RUP model has 4 phases which cover the whole development steps such as requirement analysis, design, development and test. By applying the RUP model, SW development can be represented with the iterations of developments for each phase. Such a characteristics of the model would make the model suitable for defense acquisition. In this paper, we show the relation between the RUP model and V process model, which is the foundation for defense acquisition. In order to show how the model could be applied to SBA effectiveness analysis, graphical user interfaces for the analysis are presented at the end of the paper.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.1047-1057
• /
• 2016

Design engineering process for field programmable gate array (FPGA)-based reactor trip functions are developed in this work. The process discussed in this work is based on the systems engineering approach. The overall design process is effectively implemented by combining with design and implementation processes. It transforms its overall development process from traditional V-model to Y-model. This approach gives the benefit of concurrent engineering of design work with software implementation. As a result, it reduces development time and effort. The design engineering process consisted of five activities, which are performed and discussed: needs/systems analysis; requirement analysis; functional analysis; design synthesis; and design verification and validation. Those activities are used to develop FPGA-based reactor bistable trip functions that trigger reactor trip when the process input value exceeds the setpoint. To implement design synthesis effectively, a model-based design technique is implied. The finite-state machine with data path structural modeling technique together with very high speed integrated circuit hardware description language and the Aldec Active-HDL tool are used to design, model, and verify the reactor bistable trip functions for nuclear power plants.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1170-1175
• /
• 2009

When managers estimate exact construction cost at early stage and design phase, they can reduce construction cost in a more efficient way than to predict at construction stage. But, the current of public construction cost estimation and management is concentrated almost after detailed design phase. Therefore, construction cost management in design development phase to generally use approximate estimating is not correct. Also, the existing construction cost used the method that estimated by gross floor area-based cost estimates at design development phase. So, it is difficult to show the specific amount of materials and basis about the estimated cost of the construction. This study derived problems and limits of construction management at design development phase in case of public office building project through review of literature and current survey, and suggested estimating process model process of structural construction cost go improve these matters.

• International Journal of Automotive Technology
• /
• v.3 no.2
• /
• pp.47-52
• /
• 2002

The integration of CAD/CAM/CAE in product development is the key to realize concurrent engineering. Generally, different systems are employed in product development departments. These different systems create a lot of trout)toes such as difficulty in communication, misunderstanding and so on. A new approach to integrate CAD/CAM/CAE in one system based on CATIA thor the end-to-end process in cylinder head development is presented. Hulti Model Technology (MMT) is used to create consistent and associated CAD models for the end-to-end process in cylinder head development. The concept and method to create and organize multi models are discussed. A typical four-layer structure of HHT for mechanical products is defined. The multi level structure of the cylinder head models based on MMT is provided. The CAD models of cylinder head created based on MMT can be used as the consistent model. All models in the downstream of cylinder head development such as structure analysis, CFD, sand core design , casting simulation and so oil are associated with the CAD models. Practice shows the approach in this paper enables the development process to be carried concurrently and can obviously shorten time to the market, reduce product cost and improve product quality.

• Journal of Internet Computing and Services
• /
• v.5 no.4
• /
• pp.95-113
• /
• 2004

RUP(Rational Unified Process) is a development process which is based on object-oriented, use case centric, architecture centric, and iterative approach. Public projects performed previously adopt waterfall lifecycle model for development of large scale software. However, recently various projects adopt an iterative approach to minimize risks of a project and to enhance quality of software. But few research result on practices of RUP as the subprocess of system development process is available. This paper presents a system development process which uses RUP as the subprocess for a subset of the system. Thus we introduce a tailored RUP for K-CIS(Korean Core Instrumentation System). Moreover, we assess the application result of K-CIS with typical waterfall lifecycle model and RUP. We believe that the results of our work are useful for tailoring a system development process with RUP, reducing risks of development, and enhancing the quality of a final product.

• Journal of KIISE:Software and Applications
• /
• v.33 no.3
• /
• pp.267-276
• /
• 2006

IS 15504 and CMMI, etc are already proven models as a framework to improve the maturity of enterprise software development. However, these process maturity models can't present the detail and practical methods with which people can enhance the development competence and efficiency of an enterprise. Each company or organization should develop its own model or tailor the above models to make them suitable to its unique environment such as product or technology domain, scale of business or organization and cultural environment, etc for the practical application. This study introduces experiences that organizational and technical capability was reinforced based on our own process capability improvement model to improve software development strength in Samsung Electronics. We modeled our own improvement model which is expanded from IS 15504 against our experience. Our SPI model expanded its capability to organizational and technical issues including newly introduced capability level for evaluating its implementation. We expect that our study would give contribution for presenting industry experience and reference model for reinforcing software development competence.