• 한국지반공학회논문집
• /
• 제21권2호
• /
• pp.85-91
• /
• 2005

본 논문에서는 실내모형실험 및 유한요소 프로그램인 CRISP을 이용하여 사질토 지반에 근입되어있는 선단지지 말뚝의 하중-침하(P-S) 관계를 규명하였다. 선단지지말뚝의 효과를 유한요소 해석에서 모사하기 위하여 몇 가지 형태의 인터페이스 요소들(slip elements)을 말뚝 주변 및 선단에 도입하였다. 비관련 소성흐름 법칙의 정도, 즉 지반강도 정수인 내부마찰각과 팽창각의 차이 정도를 고려한 Mo-Coulomb 지반 모델에 있어서, 인터페이스 요소들이 포함된 선단지지말뚝은 내부마찰각과 팽창각의 차이가 유한요소 해의 수렴에 매우 중요한 역할을 하는 것으로 나타났다. 한편, 이와는 대조적으로 말뚝 주변에 적용한 인터페이스 요소 대신 Roller로 모사된 선단지지말뚝의 유한요소 해는 비관련 소성흐름 법칙의 정도에 대해서 영향을 받지 않고 수렴되는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.79-91
• /
• 2019

Renewed interest in the long-term pile foundations has been driven by the increase in offshore wind turbine installation to generate renewable energy. A monopile subjected to repetitive loads experiences an evolution of displacements, pile rotation, and stress redistribution along the embedded portion of the pile. However, it is not fully understood how the embedded pile interacts with the surrounding soil elements based on different pile geometries. This study investigates the long-term soil response around offshore monopiles using finite element method. The semi-empirical numerical approach is adopted to account for the fundamental features of volumetric strain (terminal void ratio) and shear strain (shakedown and ratcheting), the strain accumulation rate, and stress obliquity. The model is tested with different strain boundary conditions and stress obliquity by relaxing four model parameters. The parametric study includes pile diameter, embedded length, and moment arm distance from the surface. Numerical results indicate that different pile geometries produce a distinct evolution of lateral displacement and stress. In particular, the repetitive lateral load increases the global lateral load resistance. Further analysis provides insight into the propagation of the shear localization from the pile tip to the ground surface.

• 한국항해항만학회지
• /
• 제30권8호
• /
• pp.711-719
• /
• 2006

본 연구는 변위억제형 Sheet pile 이 설치된 SCP복합지반의 지지력 특성에 대한 연구로서 원심모형실험과 수치해석을 통하여 SCP 복합지반의 하중-침하 관계, 응력분담특성, 최종함수비 등의 변화에 대해 알아보았다. SCP를 기초폭의 2배로 개량한 조건과 Sheet pile를 기초 한쪽 모서리에 설치한 경우, Sheet pile를 기초 양쪽 모서리에 설치한 경우 3가지에 대하여 연직하중재하 실험을 실시하였다. 한편, 원심모형실험 결과를 모사하기 위하여 상용 유한요소 프로그램인 CRISP을 이용하였으며 수치해석시 모래다짐말뚝은 탄소성모델로 점토지반은 한계평형 상태에 기초한 수정 Cam-clay 모델을 사용하였다. 원심모형실험결과 Sheet pile이 기초파괴활동을 억지하여 항복하중강도가 증가하였으며 Sheet pile 설치에 따른 응력분담비는 $2{\sim}4$의 값을 나타내었다. 또한 수치해석 결과 Sheet pile설치에 따라 지반융기량이 $20{\sim}30%$감소하였고 수평변위는 $28{\sim}43%$ 감소효과를 나타내었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.255-262
• /
• 2000

Shaking table tests were peformed to evaluate the subgrade reaction of ground according to the build-up of pore water pressure. Model pile was installed in the sand ground. The acceleration of the model ground, the pore water pressure build-up and displacement of pile were recorded by measuring devices. Subgrade reaction approach based on Winker soil model was applied to obtain the modulus of the horizontal subgrade reaction. The results of analysis show that the reduction factor of the subgrade reaction due to pore pressure increase is about 1 and the horizontal subgrade reaction of liquefied ground is not influenced by the stiffness of pile, a ground acceleration and the intial ground density.

• 산업기술연구
• /
• 제25권A호
• /
• pp.67-73
• /
• 2005

In this research, centrifuge model experiments and numerical approach of finite element method to analyze experimental results were performed to investigate the behavior of improved ground with sand compaction piles. One of typical clay minerals, kaolinite powder, were prepared for soft ground in model tests. Jumunjin standard sand was used to sand compaction pile installed in the soft soil. In order to investigate the characteristics of mechanical behavior of sand compaction piles with low replacement ratios, centrifuge model experiments with the replacement ratio of 40%, changing the width of improved area with respect to testing results the width of surcharge loads, were carried out to obtain of bearing capacity, characteristics of load-settlement, vertical stresses acting on the sand pile and the soft soil failure mechanism in improved ground.

• Computers and Concrete
• /
• 제4권5호
• /
• pp.363-376
• /
• 2007

The paper presents the development of an adaptable strut-and-tie model that can be applied to the design or analysis of four-pile caps that support axial compression and biaxial flexure from a supported rectangular column. Due to an absence of relevant test data, the model is validated using nonlinear finite element analyses (NLFEA). The results indicate that the use of the proposed model would lead to safe and economical designs. The proposed model can be easily extended to any number of piles, providing a rational procedure for the design of wide range of pile caps.

• 대한가정학회지
• /
• 제40권9호
• /
• pp.175-189
• /
• 2002

The purpose of this study was to test a structural model about family income as causally related to family hardiness, pile-up stress, communication, and family adaptation in families of children with disabilities. 250 families of children with disabilities participated as subjects. The models were developed on the basis of confirmatory factor analysis and compared using covariance structure modeling(LISREL). Adequate fitness of the model was observed. Family income showed negative effect on pile-up stress and positive effect on family adaptation. Pile-up stress showed negative effect on family hardiness. Family hardiness showed positive effect on family communication, and family communication showed positive effect on family adaptation.

• 한국지반공학회지:지반
• /
• 제9권1호
• /
• pp.31-44
• /
• 1993

말뚝이 설치되는 동안과 하중이 재하되는 동안에 유발되는 관내토의 거동과 관내토가 개단 말뚝의 지지력에 미치는 영향, 그리고 관내토의 하중전이 메카니즘 등을 알아보기 위하여, 개단말뚝의 단면부에 작용하는 지지력과 관내토에 의한 지지력 및 외주면마찰력을 분리하여 측정할 수 있도록 제작된 모형 개단강관말뚝과 압력조절이 가능한 토조를 이용하여 모래지반을 대상으로한 모형말뚝실험을 실시하였다. 실험결과로부터, 개단말뚝의 폐색정도는 폐색길이비(PLR)보다는 특정회수율(${\gamma}$)에 의하여 더 정화히 성의될 수 리음을 알 수 있으며, 내주면마찰력의 대부분은 말뚝 선단부로부터 말뚝내경의 3배까지의 영역에 존재하는 관내토에 의하여 발생되는 것으로 나타났다. 또한 전체 지지력에서 내주면마찰력이 차지하는 비율은 외주면마찰력이 차지하는 비율보다 상당히 크기 때문에, 개단말쪽의 지지력 산정시 내주면마찰력은 필수적으로 고려되어야 한다.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.95-100
• /
• 2004

H-pile can be more easily driven than pipe pile by pile driver and shows high skin friction and plugging effect. And lately It is well grown that the high strength H-pile has been widely used f3r pile foundations. To compare the skin frictions of H piles under different density soil conditions, this paper presents results of a series of model tests on vertically loaded group piles. Model piles made of steel embedded in weathered granite soil were used in this study. Pile arrangements $(2\times2,\;3\tunes3)$, pile space(2D, 4D, 6D), and soil density$(D_r=40\%,\;80\%)$ were tested. The main results obtained from the model tests can be summarized as follows. The series of tests found that compression load for group piles increases as number of piles increase and piles space ratic decrease to $D_r=40\%$ of soil density. The analysis also found that the theoretical value of skin friction for group piles is greater than practical value as piles space ratio increases to $D_r=40\%$ of soil density. Piles showed the greatest difference of the skin friction in case that the pile space ratio(S/D) is 6. The theoretical value by Meyerhof and DM-7 showed 1.83 times and 1.32 times respectively as great as practical value in case of S/D=6 and $2\times2$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.476-481
• /
• 2009

Bi-directional load test is one of O-cell tests. The O-cell test is a system which may be used for performing static load tests on cast in situ reinforced concrete bored piles. The technique was devised and developed by Osterberg of Northwestern University(USA) and has been in use around the world. The principle of the method is that an O-cell is installed in a cast in situ bored pile base. Once the pile concrete reaches its design strength the cell is connected to an hydraulic pump and pressured. Pressurization causes the cell to expand, developing an upward force on the section of pile above the cell loads, pile movements and strains within the pile then enable the capacity of the pile and its load settlement curves to be ascertained. The O-cell pile load test with variable end plate is operated on second steps - the first step is to confirming end bearing capacity with variable end plate and the second step is similar to the conventional O-cell test. In the study, To calculate ultimate capacity of bi-directional load test using model with the pile with variable end plate O-cell.