• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.103-107
• /
• 2021

Temperature dependences of electronic and thermal transport properties of narrow band gap thermoelectric materials are dependent on the transport behavior of minority carriers as well as majority carriers. Thus, weighted mobility ratio, which is defined the ratio of weighted mobility for majority carriers to that for minority carriers, must be one of the important parameters to enhance the performance of thermoelectric materials. Herein, we provided a practical guide for the development of high-performance Bi-Te-based thermoelectric materials based on the weighted mobility ratio control by considering theoretical backgrounds related to the electronic transport phenomena in semiconductors.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.290-300
• /
• 1995

Tooth mobility is one of the most important clinical parameters in examination, diagnosis, prognosis and treatment planning procedure. In order to determine the differences of tooth mobility according to radiographical bone level, clinical root length, clinical crown/root ratio, and bleeding on probing, 90 male adults with periodontal disease and 10 male adults with periodontal health($25{\sim}45$ years old) were selected through clinical examinations including occlusal relationship, probing depth, attachment level, and bleeding on probing. On the mandibular anterior teeth, standard periapical radiographs were taken, and tooth mobility was measured by Periotest(Siemens Co., Germany). The radiographic bone level of individual tooth was evaluated as coronal 1/3, middle 1/3, and apical 1/3 to anatomical root length, and clinical crown length from incisal edge to bone level and clinical root length from bone level to root apex were measured with Boley gauge, and subsquently clinical crown/root ratio was calculated. The difference of tooth mobility(Periotest value) according to radiographical bone level, clinical root length, clinical crown/root ratio, and bleeding on probing was statistically analyzed by unpaired Student t-test. Tooth mobility was significantly higher in bleeding group than non-bleeding group on probing in the teeth radiographic bone level of middle 1/3, with clinical root length longer than 6mm, and with clinical crown/root ratio over 0.3(p<0.01). But there was no statistical difference in tooth mobility between bleeding group and non-bleeding group on probing in the teeth with radiographic bone level of apical 1/3, with short clinical root length less than 5mm, and with clinical crown/root ratio under 0.2(p>0.05). The results note that the tooth mobility depends on clinical root length, clinical crown/root ratio and gingival inflammation, and in the teeth with relatively good alveolar bone support gingival inflammation is one of the most important factors that affect tooth mobility.

• Tribology and Lubricants
• /
• v.17 no.1
• /
• pp.22-27
• /
• 2001

This paper presents an analysis of eccentricity ratio of rolling piston using mobility method which is a powerful tool for analyzing dynamically-loaded journal bearings with efficiency and applicability. And, we investigate influences of design parameters (discharge pressure, radial clearance, rotational velocity of shaft, and eccentricity of compressor) on bearing load and eccentricity ratio. The results show that the discharge pressure, radial clearance and rotational velocity of shaft have significant influence on eccentricity ratio, and the discharge pressure and eccentricity of compressor have influence on bearing load.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.15-19
• /
• 2012

Presented herein are the results of the study that was conducted on the electrical characteristics of organic field-effect transistors based on poly(3-hexylthiophene), particularly the thickness and annealing temperature of their active layer is varied. The changes in field-effect mobility and current on/off ratio were explored. It was observed that both increasing annealing temperature from $60^{\circ}C$ to $100^{\circ}C$ and various concentrations influence the trade-off relations between the mobility and current on/off ratio. The surface morphology of the 2-${\mu}m^2$ area with various thicknesses was scanned via atomic-forcemicroscopy(AFM) to verify the relationship between surface morphology, which is related to the thickness of the film, and device performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.39-49
• /
• 2012

With group mobility, minimizing routing overhead among intra-group nodes can be achieved by making longer the routing update period, which may lead to degradation of inter-group's routing performance and consequently the inter-group packet delivery success ratio will be decreased. To reduce the inter-group routing overhead without lowering the inter-group packet delivery success ratio, a mobility-adaptive routing update(MARU) scheme is proposed in this paper. Main idea of the proposed scheme is group-based mobility prediction and updating routing paths by selecting intermediate common relay groups.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.763-767
• /
• 2012

The ratio of the mobility handicapped person is about 25.8% of the total population in Korea(MCT, 2006). In order to prepare for the enforcement of the "Transportation Services Improvement Act for the Mobility Handicapped People"(MCT, 2006), various equipments and installations should be developed to ensure appropriate safety level for the mobility handicapped persons in maritime transportation. While approximately 10 million people are using domestic passenger vessels annually, preferences for maritime transport is very low, especially for the mobility handicapped. This study reviewed a current status of the mobility handicapped person in domestic passenger ship and analysed the improvement plan for them. To investigate the current status of domestic passenger vessel usage by the mobility handicapped, to analysis the requirements for amenities necessary for the mobility handicapped and select the ones to be developed based on the investigated results and to do feasibility study of barrier-free ship.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.2
• /
• pp.211-216
• /
• 2013

For diffusion limited cluster agglomerates the ratio of the mobility radius to the radius of gyration $R_m/R_g$ vs. N and the ratio of the mobility radius to the radius of primary particle $R_m$/a are determined using experimental data obtained with DMA-APM and tandem DMA over a range of Knudsen numbers extending into the transition region where there is a lack of data. It was found that in slip regime with the number of primary particles between 100 and 400, datapoints are found to be between the two asymptotic lines for the continuum and free molecular regimes as those datapoints are plotted in both $R_m/R_g$ vs. N and $R_m$/a vs. N.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.13-28
• /
• 2009

Routing protocols in Delay/Disruption Tolerant Networks(DTN) are important to enhance the performance of transmission delay and delivery success ratio. In this paper, we propose an efficient DTN routing algorithm, called "Nobility Pattern based Routing(MPR)", that controls the total number of transferred message copies based on mobility patterns of mobile nodes. We consider a realistic "Levy walk" mobility pattern that has a super-diffusive property which well represents human mobility pattern. We implemented a DTN simulator using ONE simulator for the proposed MPR algorithm and Levy walk mobility pattern. Simulation results show that mobility patterns are very important for accurate evaluation of DTN routing performance, and the proposed MPR enhances the routing performance of delivery delay and success delivery ratio under realistic mobility pattern.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.3
• /
• pp.363-373
• /
• 2010

Purpose : The purpose of this study was to compare differences in thoracolumbar ranges of motions by comparing ratios among 4 type diagnosis for patient with chronic low back pain. Methods : The subjects were 58 chronic low back pain patients. A motion analysis program (Global Postural System) was used after photography for posture measurement. To analyze differences in mobility percentages and ratios of thoracolumbar ranges of motion, one-way ANOVA was used. Results : Regional difference spinal posture and movement were found to diagnosis patients with chronic low back pain. Comparison of thoracolumbar ranges of motion revealed significant differences in the thoracic region during forward-bending of the trunk (p<.05). In the upper thoracic region, the herniated intervertebral lumbar disc (HILD) group was significantly larger than the spinal stenosis/herniated intervertebral lumbar disc (SS/HILD) group (p<.05). In the lower thoracic region, chronic sprains (CS) were significantly greater than in the spinal stenosis (SS) group and in the (SS/HJLD) group (p<.05). Comparative analysis of thoracic/lumbar mobility ratio showed the CS group's ratio during forward bending was largest: 1.66, while the HILD group's ratio was smallest: 84 a significant difference between the two groups (p<.01). Diagnosis was not associated with difference in thoracolumbar backward-bending range of motion (p>.05). Conclusion : Theses results indicate the clinical efficacy of diagnosing for chronic low back pain by evaluating spinal mobility.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.10
• /
• pp.940-946
• /
• 2012

This paper proposes a method to predict maximum traction for unmanned robots on rough terrain in order to improve traversability. For a traction prediction, we use a friction-slip model based on modified Brixius model derived empirically in terramechanics which is a function of mobility number $B_n$ and slip ratio S. A friction-slip model includes characteristics of various rough terrains where robots are operated such as soil, sandy soil and grass-covered soil. Using a friction-slip model, we build a prediction model for terrain parameters on which we can know maximum static friction and optimal slip with respect to mobility number $B_n$. In this paper, Mobility number $B_n$ is estimated by modified Willoughby Sinkage model which is a function of sinkage z and slip ratio S. Therefore, if sinkage z and slip ratio are measured once by sensors such as a laser sensor and a velocity sensor, then mobility number $B_n$ is estimated and maximum traction is predicted through a prediction model for terrain parameters. Estimation results for maximum traction are shown on simulation using MATLAB. Prediction Performance for maximum traction of various terrains is evaluated as high accuracy by analyzing estimation errors.