• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.98-102
• /
• 2006

Recent development of Information Technology, the ubiquitous computing environment is on the rise. At the same time, RFID technology and its related applications are actively investigated. In this paper, a portable merchandise information providing system using cheap wireless transmission module is developed in order to overcome the mobility limitation of the wired RFID system. The TRF6901 chipset of 900MHz band from TI is used for the wireless transmission module and the MPS430F149 is used for the MPU. It is expected that the developed system can be applied to numerous innovative wireless applications such as library circulation desk for lending service and automated door system for entrance control.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.203-210
• /
• 2008

Because BSP(Basic Support Protocol) of NEMO(Network Mobility) has important limitation of not providing route optimization, several route optimization schemes have been proposed. By analyzing and improving the limitations of the existing schemes. we Propose an advanced integrated route optimization scheme for the communication through both the internal and external routing of nested NEMO. Our proposal includes a secure route optimization protocol which connects TLMR directly to an external node CN without passing through any HAs. and allows TLMR to control the internal path without passing through the internet. Thus, our scheme can strengthen the security as well as improve the path and delay of NEMO communication.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.189-196
• /
• 2021

In this paper, we propose techniques to correct the altitude error and heading error of 3D Pedestrian Inertial Navigation (PIN). When a PIN is used to estimate the location of a pedestrian only with an Inetrial Measurement Unit (IMU) without infrastructure, there is a problem in that the location error gradually increases due to the limitation of the observability of the filter. To solve this problem without additional sensors, we propose two techniques in this paper. First, stair walking is recognized in consideration of the altitude difference that may occur during one step. If it is recognized as stair walking, only Zero-velocity UPdaTe (ZUPT) is performed, and if it is recognized as level walking, ZUPT + Altitude Damping (AD) is performed together to correct the altitude error. Second, the straight-line movement direction is calculated through the difference of the estimated position, and the heading error is corrected by matching this information with the link information of the digital map. By applying these techniques, it is verified through real tests that accurate three-dimensional location information of pedestrians can be estimated without infrastructure.

• Clinical Pain
• /
• v.18 no.2
• /
• pp.121-125
• /
• 2019

Arthritis of hip joints deteriorates the quality of life in ankylosing spondylitis (AS) patients. Secondary to the articular inflammatory process, the shortened hip-girdle muscles contribute to the decreased joint mobility which may lead to the functional impairment. As the limitation of range of motion (ROM) usually progress slowly, clinicians regard it as a chronic condition and prescribe long-term therapy. However, by short-term intensive multimodal treatment, a 20-year-old man diagnosed as AS with severely limited hip joint ROM who relied on crutches doubled the joint angle and could walk independently only within 2 weeks. The combination included intra-articular steroid injection, electrical twitch obtaining intramuscular stimulation, extracorporeal shock wave therapy, heat, manual therapy, and stretching exercises. The management focused on the relaxation of hip-girdle muscles as well as the direct control of intra-articular inflammation. Hereby, we emphasize the effectiveness of intensive multimodal treatment in improving the function even within a short period.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.1
• /
• pp.49-60
• /
• 2024

This study used the Unified Theory of Acceptance and Use of Technology(UTAUT) model to find factors that influence consumer acceptance intention toward Vertiport, a physical ground support technology required to implement AAM services. The analysis showed that among the four independent variables, Vertiport's social influence and facilitating conditions have a significant impact on future Vertiport usage behavior. At this point, the public has not yet had actual experience with Vertiport, so there is a limitation of considering it as a future concept based on speculation and measuring acceptance by actual behaviors related to its use (inquiries, information gathering, interest, etc.). Research on acceptance and attitudes toward new transportation methods should be further activated and developed along with future service development. Through the results of this study, we aim to understand the initial public acceptance of Vertiport as a ground-based infrastructure in the AAM field (or UAM) and propose strategic implications for the direction of service development.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.147-154
• /
• 2007

Network topology in ad hoc networks keeps changing because of node mobility and no limitation in number of nodes. Therefore, the scalability of routing protocol is of great importance, However, table driven protocols such as DSDV have been known to be suitable for relatively small number of nodes and low node mobility, Various protocols like FSR, OLSR, and PCDV have been proposed to resolve scalability problem but vet remain to be proven for their comparative superiority for scalability, In this paper, we compare and amine them by employing various network deployment scenarios as follows: network dimension increase's while keeping node density constant node density increases while keeping network dimension fixed, and the number of sessions increase with the network dimension and the number of nodes fixed. the DSDV protocol showed a low scalability despite that it imposes a low overhead because its convergence speed against topology change is slow, The FSR's performance decreased according to the increase of overhead corresponding to increasing number of nodes, The OLSR with the shortest convergence time among them shows a good scalability, but turned out to be less scalable than the PCDV that uses a clustering because of its relatively high overhead.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.85-98
• /
• 2009

Recently, there are a number of researches and developments for the personalized software platform for mobility based on SaaS. The platform requires an optimal virtual machine in order to satisfy the operating systems of various users for the software. In addition, the platform must guarantee the mobility of the users' working environments by supporting fast and secure services between internal and external networks in the platform operating systems. In order to verify the optimal behaviors of virtual machines for the platform, the performance of the virtual machines must be measured and analyzed in various perspectives. In the previous research, unfortunately, the performance of a virtual machine were conducted in the condition that a guest operating system was installed on the virtual machine and considered as a computer, by measuring the network traffic between the guest operating system and an external client operating system. This performance measurement was not suitable for a virtual machine for the platform since a number of different software must be handled in the virtual machine. In order to overcome this limitation, this paper presents a measurement method for network performance and proposes the most optimal virtual machine by the method.

• Archives of Reconstructive Microsurgery
• /
• v.2 no.1
• /
• pp.46-52
• /
• 1993

Soft-tissue deficits over the plantar forefoot, plantar heel, Achilles tendon, and distal parts of lower leg are often troublesome to cover with a simple graft or local flap due to limited mobility of surrounding skin and poor circulation in these area. Soft-tissue reconstruction in these regions should provide tissue components similar to the original lost tissue, supply durability and minimal protective pressure sensation and result in a donor site that is well tolerated and treated. We analysed 7 cases that were treated with the Instep flap due to soft-tissue defects over these regions from July of 1990 to July of 1993. All flaps were viable and successful at follow-up. 1. The age ranged from 9 years to 60 years, and 6 cases were male and 1 case female. 2. The sites of soft-tissue loss were the plantar forefoot(1 case), plantar heel(3 cases), Achilles tendon(2 cases), and distal parts of lower leg(1 case). 3. The causes of soft-tissue loss were simple soft-tissue crushing injury(1 case), crushing injury of the 1st toe(1 case) and posttraumatic infection and necrosis(5 cases). 4. The associated injury were open distal tibio-fibula, fracture(2 cases), medial malleolar fracture of the ankle(1 case), Achilles tendon rupture(2 case) and 1st metatarso-phalangeal disarticulation(1 case). 5. The size of flap was from $3{\times}4cm$ to $5{\times}10cm$(average $4{\times}5.6cm)$. 6. In 7 cases, we were not to find post-operative necrosis and infection, non-viability, limitation of ankle joint, and gait disturbance caused by the Instep flap surgery. 7. This study demonstrates that the Instep flap should be considered as another valuable technique in reconstruction of these regions.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.85-95
• /
• 2005

Whereas the traditional multicast schemes based on Mobile IP can support a limited number of very large multicast groups, the Xcast protocol can support a very large number of small multicast groups, In the Xcast, the source node encodes the list of destinations in the Xcast header. Therefore, the maximum packet size in the network limits the number of destinations that a Xcast packet may have. In this paper, an enhanced Xcast protocol is proposed to solve the multicast group size limitation of the existing Xcast protocol in providing multicast service for mobile nodes. Moreover, the SIP (a very flexible control plane protocol) is integrated with the proposed multicast scheme to provide mobility awareness on the application layer. The simulation results verify that the proposed multicast scheme not only increases the packet delivery ratio and the data packet forwarding efficiency but also achieves low latency of packets in the network.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.250-253
• /
• 2013

In this paper, we fabricated 3D pillar type silicon-oxide-nitride-oxide-silicon (SONOS) devices for high density flash applications. To solve the limitation between erase speed and data retention of the conventional SONOS devices, bandgap-engineered (BE) tunneling oxide of oxide-nitride-oxide configuration is integrated with the 3D structure. In addition, the tunneling oxide is modulated by another method of $N_2$ ion implantation ($N_2$ I/I). The measured data shows that the BE-SONOS device has better electrical characteristics, such as a lower threshold voltage ($V_{\tau}$) of 0.13 V, and a higher $g_{m.max}$ of 18.6 ${\mu}A/V$ and mobility of 27.02 $cm^2/Vs$ than the conventional and $N_2$ I/I SONOS devices. Memory characteristics show that the modulated tunneling oxide devices have fast erase speed. Among the devices, the BE-SONOS device has faster program/erase (P/E) speed, and more stable endurance characteristics, than conventional and $N_2$ I/I devices. From the flicker noise analysis, however, the BE-SONOS device seems to have more interface traps between the tunneling oxide and silicon substrate, which should be considered in designing the process conditions. Finally, 3D structures, such as the pillar type BE-SONOS device, are more suitable for next generation memory devices than other modulated tunneling oxide devices.