• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.377-380
• /
• 2010

MANET(Mobile Ad-hoc Network) has been proposed as a infrastructure-less network using distributed algorithm for remote environment monitoring and control. The mobility of MANET would make the topology change frequently compared with a static network and a node is resource-constrained. Hence, to improve the routing protocol in MANET, energy efficient routing protocol is required as well as considering the mobility would be needed. In this paper, we extend RODMRP(Resilient Ontology-based Dynamic Multicast Routing Protocol) structure by a modifying the level of cluster. We call this network protocol CACH-RODMRP. Our contribution consists estimating the optimal level of clustering depth with considering node position and reducing the network residual energy. The simulation results of proposal algorithm show that the energy is significantly reduced compared with the previous clustering based routing algorithm for the MANET.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.10-14
• /
• 2009

We propose a trapezoidal gate AlGaN/GaN high electron mobility transistor(HEMT) to improve the breakdown voltage characteristics and its feasibility is investigated by two-dimensional device simulations. The use of a trapezoidal gate structure appears to be quite effective in dispersing the electric fields concentrated near the gate edge on the drain side from the simulation result. We find that a peak value of the electric field along the 2-DEG channel is reduced by 30%, from 4.8 to 3.5 MV/cm and thereby, the breakdown voltage(Vbr) of the proposed AlGaN/GaN HEMT is increased by about 40%, from 49 to 69 V, compared to those of the standard AlGaN/GaN HEMT.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.592-597
• /
• 2020

Since SiC has 10 times higher breakdown field and 3 times higher energy gap than Si, it is possible to manufacture an excellent power MOSFET with a high breakdown voltage. However, since it has a high on-resistance due to low mobility, a Trench MOSFET has been proposed to lower it, but at the same time, it has a problem that BV decreases. The purpose of this paper is to design a 1200V trench MOSFET, and to solve this, split Epi depth, Trench depth, and Trench depth to Epi depth, which are important variables for BV and Ron, to achieve maximum electric field, BV, Ron's reliability characteristics were compared and analyzed. As the epi depth increased, the trench depth decreased, and the epi depth decreased at the trench depth, the maximum electric field decrease, BV increase, and Ron increase were confirmed. All results were simulated by sentaurus TCAD.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.61-67
• /
• 2008

Proxy MIPv6 (PMIPv6) is that network-based mobility management protocol that network supports mobile node's mobility on behalf of the MN. In PMIPv6, when two MNs located within the same PMIPv6 domain want to communicate each other, sub-optimal path is established between the two MN. Route optimization method for PMIPv6 is proposed to resolve the problem. However, the method still suffer from the performance degradation due to out-of-sequence packet problem. In this paper, we propose the route optimization mechanism in PMIPv6 based on Flush message to resolve the out-of-sequence packet problem. The proposed mechanism is evaluated by performing simulations, and the simulation results show that the proposed one gives better performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.191-200
• /
• 2007

As the IEEE 802.11 WLAN has widely installed as a high-speed wireless network information infrastructure, there has been growing interest in both security and mobility of mobile terminals. However, for the case of mobile terminal employing IEEE 802.11i security standard, it is known that the user authentication procedure of IEEE 802.1x for stronger security enforcement may, due to its large delay, not be suitable for real-time multimedia communication. In this paper, we have proposed fast authentication method to resolve the above authentication delay problem, and verifies its performance via simulation analysis. Mobile terminals can get AP information reliably, and selectively execute authentication in advance during handover, which results in fast user authentication. In addition, by effectively managing the authentication information in mobile terminal, which are distributed in advance for pre-authentication, the problem of long-time revelation of authentication information has been solved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3A
• /
• pp.287-295
• /
• 2010

In wireless sensor networks(WSNs), the studies that support sink mobility without global position information exploit a Backbone-based Virtual Infrastructure (BVI) which considers one-hop clusters and a backbone-based tree. Since the clusters of a sink and a source node are connected via flooding into the infrastructure, it causes high routing cost. Although the network could reduce the number of clusters via multi-level clusters, if the source nodes exist at nearest clusters from the cluster attached by the sink and they are in different branches of the tree, the data should be delivered via detour paths on the tree. Therefore, to reduce the number of clusters, we propose a novel multi-hop cluster based communication protocol supporting sink mobility without global position information. We exploit a rendezvous cluster head for sink location service and data dissemination but the proposed protocol effectively reduces data detour via comparing cluster hops from the source. Simulation shows that the proposed protocol is superior to the existing protocols in terms of the data delivery hop counts.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.314-323
• /
• 2002

The routing protocols designed for wired networks can hardly be used for mobile ad-hoc networks due to limited bandwidth of wireless transmission and unpredictable topological change. Recently, several routing protocols for mobile ad-hoc networks have been Proposed. However, when theme protocols are applied to support real time services like multimedia transmission, they still have problems in ad-hoc networks, where the topology changes drastically. In this paper, we propose a new route selection algorithm which selects the most reliable route that is impervious to route failures by topological changes by mobile hoots. For reliable route selection, the concept of virtual zone (stable zone and caution zone) is proposed. The zone is located in a mobile node'transmission range and determined by mobile node's mobility information received by Global Positioning System (GPS). The proposed algorithm is applied to the route discovery procedure of the existing on-demand routing protocol, AODV, and evaluated by simulation in various traffic conditions and mobility patterns.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.224-232
• /
• 2002

The routing protocols designed for wired networks can hardly be used for mobile ad-hoc networks due to limited bandwidth of wireless transmission and unpredictable topological change. Recently, several routing protocols for mobile ad-hoc networks have been proposed. However, when these protocols are applied to support real time services like multimedia transmission, they still have problems in ad-hoe networks, where the topology changes drastically. In this paper, we propose a new route selection algorithm which selects the most reliable rouse that is impervious to route failures by topological changes by mobile hosts. For reliable route selection, the concept of virtual zone (stable lone and caution zone) is proposed. The lone is located in a mobile node's transmission range and determined by mobile node's mobility information received by Global Positioning System (GPS). The proposed algorithm is applied to the route discovery procedure of the existing on-demand routing protocol, AODV, and evaluated by simulation in various traffic conditions and mobility patterns.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.377-385
• /
• 2010

In this paper, we propose a SInk-initiated geographic Multicast (SIM) protocol to reduce frequent location updates from mobile sinks to a source and to achieve fast multicast tree construction and data delivery. The proposed protocol allows sinks to construct their own data delivery paths to a source node and a multicast tree to be atomically constructed by merging the paths. Then, the source forwards data to the destinations down the multicast tree. This paper also propose a round-based virtual infrastructure with a radial shape for increasing the merging probability of data delivery paths and reducing reconstruction ratio of the multicast tree due to mobility of sinks. Simulation results show that the proposed protocol is superior to previous SOurce-initiated geographic Multicast (SOM) protocols in term of average data delivery delay and average energy consumption.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.99-107
• /
• 2012

We propose control mechanism of UAV(Unmanned Aerial Vehicle) group for making the communication network to the base station after the target is found. We assume UAVs can communicate to each other by wireless LAN without existing communication infrastructure. UAVs started to fly in linear formation, after finding target, UAVs move to the base station to send the information about the target. At least one UAV stays the position that the target is found. This paper explains the mechanism supporting reliable connectivity during UAV group's flying. We verify the proposed scheme and evaluate the performance through NS-2 simulation. The proposed scheme can be applied to the disaster area and war zone, which the existing communication infrastructure cannot be worked.