• Journal of Korean Association for Spatial Structures
• /
• v.15 no.3
• /
• pp.77-83
• /
• 2015

The cases of conducting the vibration measurement using the mobile phone with regard to the building's horizontal vibration are very rare in Korea and foreign countries. Therefore, this study analyzed the horizontal vibration nature of the building using the mobile phone targeting 5 tall buildings, and reviewed about the applicability of the mobile phone vibration measuring instrument through the comparison/verification with the data of the existing vibration measuring instrument. The peak of the measured time series waveform was measured clearly and it showed a similar value to the existing natural frequency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1288-1292
• /
• 2007

Mobile phone is necessary articles by increasing mobile communication now. People usually use the Mobile phone in any time and place. Ring tone of Mobile phone effect owner or other person. The sound level of Mobile phone ring tone could be considered as noise if it is too loud a specific situation. Manufacturing company improve ring tone of mobile phone better in consumer's perception. In this study, we record ring tone of mobile phone and estimated the complexity and nonlinear characteristics of the relation between subjective evaluation and sound metrics. Linear regression models were obtained for the subjective evaluation and sound quality metrics. Semantic Differential Method is used to study sound quality Evaluation. To analyze the sound quality of ring tone.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.740-742
• /
• 2005

In the past, a mobile phone had only a function of communication. Recently, new functions such as an mp3 player and a camera are added in a mobile phone. For the application of a camera module to a mobile phone, the size of the camera module needs to become smaller than a general Digital Camera. Furthermore, it is also required that the performance of the camera module in a mobile phone be the same as that of a Digital Camera. In order to fulfill these requirements, the camera module should have functions such as Auto Focus, Zoom, the shutter and the aperture. Therefore, we introduce a simple and effective actuator and propose the shutter composed of solenoid.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.4
• /
• pp.109-116
• /
• 2016

Recently, with development of city traffic network planning, there are various effects with living space from vibration of railway. But, study which about effect from vertical vibration in floor slab in nearing structure is lack in nowadays. This thesis have analysed result from acceleration response per distance as well as proceed with serviceability evaluation and extracted natural frequency from measuring vibration of railway using mobile phone application which is oriented for building which have distances about 5m to 22m from railway.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.11
• /
• pp.875-881
• /
• 2003

The received signal of a mobile phone is normally sensed through two independent means which are the sound generation of a speaker and vibration generation of a vibration motor. As an improvement scheme to meet the consumer's demand on weight reduction and miniaturization of a mobile phone, the design and development of an integrated vibration and sound generating device are performed in this research. To this purpose, the optimal shapes of the voice coil. the permanent magnet and the vibration plate are designed, and the excitation force applied to the vibration system of the new device is estimated and verified through theoretical analyses, computer simulation, and experiments using an expanded model. In addition, vibration performance comparison of the device with the existing vibration motor is performed, and from the overall process, therefore, the method and procedure for the vibration performance analysis of the integrated vibration and sound generating device are established.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.4
• /
• pp.99-105
• /
• 2015

The serviceability design of the high-rise building is affected by the wind response vibration such as the acceleration, at this time it is important to calculate the natural frequency correctly. Since the suggestion equation of the natural frequency being used in the design phase is not the regression equation obtained from the vibration measurement of the high-rise building, the verification to use for the serviceability design of the high-rise building is necessary. This thesis conducted an ambient vibration measuring on the high-rise building through the mobile-phone application to calculate the natural frequency and suggested a natural frequency approximate expression following the building's height, and compared with the domestic/foreign standard and the result of the eigen-value analysis.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.1
• /
• pp.27-35
• /
• 2004

A study was conducted to investigate an optimal vibration frequency for mobile phones with just noticeable difference(JND). The just noticeable difference, Weber's law, is the minimum amount by which stimulus intensity must be changed in order to produce a noticeable variation in sensory experience. In order to find the optimal vibration frequency, sixteen frequencies ranged from 24Hz to 603Hz were selected. Subjects then wereasked to differentiate a pair of vibration frequencies. For the analysis, the psychometric function to determine the optimal vibration frequency and the logistic regression to validate the determined frequency were used. The results show that the 2nd order polynomial equations were best fitted for the JND psychometric function and the optimal mobile phone vibrations were determined at 140Hz, 151 Hz, and 160Hz. With the ogive-shaped psychometric function developed by the logistic regression, the results of this study was validated that the determined vibration frequencies (140Hz, 151 Hz, and 160Hz) were optimal mobile phone vibration frequencies.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.2
• /
• pp.47-54
• /
• 2016

It is very important to calculate natural frequency of the observatory tower correctly because it is keenly affected by wind response vibration due to its large slenderness ratio, weight and small damping ratio. Additionally, suggestion equation of natural frequency being used in the design phase has considerable difference between actual measured value thereby making it inappropriate to be used in the serviceability design of the observatory tower. Therefore, this paper conducted an ambient vibration measuring on 10 observatory towers through mobile-phone application thereby calculating the natural frequency and comparing the result with the domestic and foreign standards and that of the eigen-value analysis. This paper suggested approximate equation of the natural frequency of the observatory tower; T=0.0266H. The square of the corelation coefficient is 0.940, which is high.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.230-235
• /
• 2008

With the advent of the telecommunication era, a mobile phone becomes a necessary communication device in modern society. For silent tactile signal, vibration motors have become one of the generic components in most mobile phones. Conventional vibration motors employ three-phase windings with mechanical brushes for commutation. However, mechanical commutation in these prior arts greatly deteriorates its life span, reliability, and productivity due to structural intricacy. This paper introduces a novel design of solenoid-type vibrators using electromagnetic and mechanical analysis. The proposed vibrators have a simpler structure and longer life span by eliminating wear-prone commutation parts in vibration motors.

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.4
• /
• pp.39-46
• /
• 2014

In Seoul, total 27 places of foot-bridges were chosen to evaluate the damping ratio through vibration measurement by mobile-phone application. Model vibration test was performed to compare the natural frequency and damping ratio between the conventional accelerometer and mobile-phone application. Measured average damping was compared with the one of Bachmann. The relation between the damping ratio and span was also investigated. Measured average damping ratio was greater than that of Bachmann. It was shown that there is no distinct trend between damping and span.