• 대한화학회지
• /
• 제38권11호
• /
• pp.808-818
• /
• 1994

$MCl_z$(M = Mo; z = 5, M = V; z = 3)과 N,P 주개 리간드를 acetonitrile 용매에서 반응시켜 중성착물 [$MCl_3L_2$(MeCN)] (M = Mo, V: L = $PPh_3$, 1/2 phda)을 합성하였다. Acetone 용액에서 이들 중성 화합물과 $AgClO_4$를 반응시켜 [$MCl_3-_nL_2(MeCN)(S)_n$]$(ClO_4)_n$ (n = 1, 2 : s = solvent)의 양이온 화합물을 얻었다. 2가의 양이온 화합물과 중성 화합물을 반응시켜 염소가 다리 연결된 이핵 화합물 $[(MeCN)(L)_2ClM({\mu}-Cl)_2M'Cl(L)_2(MeCN)](ClO_4)_2$ 및 1가의 양이온 화합물과 pyzidine을 2:1 화학양론으로 반응시켜 pyzidine이 다리 결합된 이핵 화합물 $[(MeCN)(L)_2Cl_2M({\mu}-pyz)M'Cl_2(L)_2(MeCN)](ClO_4)_2$형의 호모(M = M'), 헤테로(M ${\neq}$ M') 화합물을 합성하였다. 합성한 착물들은 원소분석과 적외선, $^1H$, $^{13}C$ 핵자기 공명 및 전자 흡수스펙트럼 등을 이용하여 그 특성을 조사하였다.

• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.387-392
• /
• 2017

A high-performing all-transparent photodetector was created by configuring a $MoO_x$/NiO/ZnO/ITO structure on a glass substrate. The ITO bottom layer was applied as a back contact. To achieve the transparent p/n junction, p-type NiO was coated on the n-type ZnO layer. Reactive sputtering was used to spontaneously form the ZnO or NiO layer. In order to improve the transparent photodetector performance, the functional $MoO_x$ window layer was used. Optically, the $MoO_x$ window provided a refractive index layer (n=1.39) lower than that of NiO (n=2), increasing the absorption of the incident light wavelengths (${\lambda}s$). Moreover, the $MoO_x$ window can provide a lower sheet resistance to improve the carrier collection for the photoresponses. The $MoO_x$/NiO/ZnO/ITO device showed significantly better photoresponses of 877.05 (at ${\lambda}$=460nm), 87.30 (${\lambda}$=520 nm), and 30.38 (${\lambda}$=620 nm), compared to 197.28 (${\lambda}$=460 nm), 51.74 (${\lambda}$=520 nm) and 25.30 (${\lambda}$=620 nm) of the NiO/ZnO/ITO device. We demonstrated the high-performing transparent photodetector by using the multifunctional $MoO_x$ window layer.

• 대한화학회지
• /
• 제36권5호
• /
• pp.661-668
• /
• 1992

MoCl_5와 NaNO_2 및 산성화시킨 FeSO_4의 reductive nitrosylation 반응을 통해 다핵 화합물인 [{Mo(NO)_2Cl_2}n]을 합성하였다. 이 [{Mo(NO)_2Cl_2}n]와 한자리 및 두자리 리간드를 반응시켜 높은 수득률(80∼90%)로 중성의 단핵 화합물인 [Mo(NO)2Cl2L2(or L-L)]을 얻었다. 사용한 리간드는 3,5-Lutidine, {\gamma}-Cyanopyridine, 1,2-Phenylenediamine, 1,10-Phenanthroline, sym-Diphenylethylenediamine, 9,10-Phenanthrenequinone, 1,3-Bis(diphenylphosphino)propane 및 8-Hydroxyquinoline 이였다. 합성한 dinitrosylmolybdenum 착물은 원소분석과 적외선, 핵자기 공명 및 전자 흡수 스펙트럼 등을 이용해서 그 특성을 조사하였다. 적외선 스펙트럼은 모든 화합물이 팔면체 구조로서 두 개의 NO 기가 cis 위치로 배위되어 있음을 보였다.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.645-651
• /
• 2012

This study investigated changes in phase fraction caused by the addition of Mo, as well as the subsequent behaviour of N and its effect on the mechanical properties of welded 24Cr-N duplex stainless steel weld metals. Filler metal was produced by fixing the contents of Cr, Ni, N, and Mn while adjusting the Mo content to 1.4, 2.5, 3.5 wt%. The delta ferrite fraction increased as the Mo content increased. In contrast, the ${\gamma}$ fraction decreased and changed from a round to an acicular shape. Secondary austenite (${\gamma}^{\prime}$) was observed in all specimens in a refined form, but it decreased as the Mo content increased to the extent that it was nearly impossible to find any secondary austenite at 3.5 wt% Mo. Both tensile and yield strengths increased with the addition of Mo. In contrast, the highest value of ductility was observed at 1.41 wt% Mo. At all temperatures, impact energy absorption showed the lowest value at 3.5 wt% Mo, at which the amount of ${\delta}$-ferrite was greatest. There was no significant temperature dependence of the impact energy absorption values for any of the specimens. As the fraction of ${\gamma}$ phase decreased, the amount of N stacked in the ${\gamma}$ phase increased. Consequently, the stacking fault energy decreased, while the hardness of ${\gamma}$ increased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.691-693
• /
• 2007

We report on a highly conductive and stable hole transporting layer comprising of N,N'-di(1- naphthyl)-N,N'-diphenylbenzidine $({\alpha}\;-NPD)$ doped with molybdenum oxide $(MoO_3)$. Compared to the reference device, the device with $MoO_3-doped$ hole transporting material exhibits higher conductivity and thermal stability. The temperature dependence of the current-voltage characteristics are studied for various $(MoO_3)$ doping concentration.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.561-571
• /
• 1999

Microstructure and mechanical properties of five Cr-Mo steels for nuclear industry applications have been investigated. Transmission electron microscopy, energy dispersive spectrometer, differential scanning calorimeter, hardness, tensile, and impact test were used to evaluate the Cr and W effect on the microstructure and mechanical properties. Microstructures of Cr-Mo steels after tempering are classified into three types : bainitic 2.25Cr-lMo steel, martensitic Mod.9Cr-lMo, HT9M, and HT9W steels, and dual phase HT9 steel. The majority of the precipitates were found to be M$_{23}$C$_{6}$ carbides. As minor phases, fine needle-like V(C,N), spherical NbC, fine needle-like Cr-rich Cr$_2$N, and Cr-rich M$_{7}$C$_3$were also found. Addition of 2wt.% W in Cr-Mo steels retarded the formation of subgrain and dissolution of Cr$_2$N precipitates. Hardness and ultimate tensile strength increased with increasing Cr content. Though Cr content of HT9W steel was lower than that of HT9 steel, the hardness of HT9W was higher due to the higher W content. W added HT9W steel had the highest ultimate tensile strength above $600^{\circ}C$. But impact toughness of W added steel (HT9W) and high Cr steel (HT9) was low.w.w.

• Bulletin of the Korean Chemical Society
• /
• 제18권2호
• /
• pp.213-217
• /
• 1997

Magnesium reduction of Mo(N-C6H3-2,6-i-Pr2)2Cl2(DME) in the presence of trimethylphosphine led to a mixture of Mo(N-C6H3-2,6-i-Pr2)(PMe3)2Cl3, 1, and Mo2(PMe3)4Cl4, 2. In solution 1 is slowly air-oxidized to Mo(N-2,6-i-Pr2-C6H3)(OPMe3)(PMe3)Cl3, 3. 1 is chemically inert to carbon nucleophiles (ZnMe2, ZnEt2, AlMe3, AlEt3, LiCp, NaCp, TlCp, NaCp*, MeMgBr, EtMgBr), oxygen nucleophiles (LiOEt, LiO-i-Pr, LiOPh, LiOSPh), and hydrides (LiBEt3H, LiBEt3D). Crystal data for 1: orthorhombic space group P212121, a=11.312(3) Å, b=11.908(3) Å, c=19.381(6) Å, Z=4, R(wR2)=0.0463 (0.1067). Crystal data for 2: monoclinic space group Cc, a=18.384(3) Å, b=9.181(2) Å, c=19.118(3) Å, b=124.98(1)°, Z=4, R(wR2)=0.0228 (0.0568). Crystal data for 3: orthorhombic space group P212121, a=11.464(1) Å, b=14.081(2) Å, c=16.614(3) Å, Z=4, R(wR2)=0.0394 (0.0923).

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1992년도 춘계연구발표회 논문개요집
• /
• pp.70-71
• /
• 1992

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.720-724
• /
• 2016

Transparent n-type metal-oxide semiconductor of $MoO_x$ was applied on a p-type Si substrate for high-performing heterojunction photodetector. The formation of $MoO_x$ on Si spontaneously established a rectifying current flow with a high rectification ratio of 1,252.3%. Under light illumination condition, n-type $MoO_x$/p-type Si heterojunction device provided significantly fast responses (rise time : 61.28 ms, fall time : 66.26 ms). This transparent metal-oxide layer ($MoO_x$) would provide a functional route for various photoelectric devices, including photodetectors and solar cells.

• 공업화학
• /
• 제7권5호
• /
• pp.861-868
• /
• 1996

n-butene의 i-butene으로의 골격 이성질화 반응은 발열반응으로서 열역학적으로 저온($100^{\circ}C{\sim}150^{\circ}C$)에서 최고수율을 나타내며 반응 mechanism은 carbonium ion의 형성과 methyl기의 골격치환에 따른 2step으로 규정된다. 산처리되어 강산점을 가지는 zeolite, alumina와 비교하여, $Pt/MoO_3/SiO_2$ 촉매 사용시 $110^{\circ}C$ 등온 환원반응 실험으로 설명되는 Proton의 증가된 표면 이동 속도는 골격 이성질화 반응시 carbonium ion의 형성을 빠르게 촉진시킬 수 있으며, 이에 따라 $110^{\circ}C$에서 1-butene의 수율은 최대치로 나타나며 부산물은 생성되지 않는다. $110^{\circ}C$에서의 등온 환원반응에서 $Pt/MoO_3/SiO_2$가 $Pt/MoO_3/Al_2O_3$보다 높은 proton spillover 속도를 보이지만 약 90분 경과한 $MoO_3$ 표면의 proton 포화상태에서는 i-butene의 반응수율이 같고, $MoO_3$가 없는 zeolite, $Pt/SiO_2$보다 높은 전환율을 보이므로 proton spillover에 의한 carbonium ion의 생성이 반응속도를 조절하는 것으로 나타난다. $Pt/MoO_3/SiO_2$에서 산점의 증가, Pt 및 $MoO_3$ 함량의 증감은 i-butene 수율에 영향을 미치지 않으며, 이는 proton spillover에 의한 Pt 표면위의 carbonium ion의 형성이 속도 결정 단계이기 때문인 것으로 사료된다.