• Korean journal of food and cookery science
• /
• v.15 no.2
• /
• pp.197-202
• /
• 1999

The objective of this study was to standardized the cooking method of Imjasootang, a traditional health food in summer. By mixing chicken soup with 20 g (I$_1$), 30 g (I$_2$), 40 g (I$_3$), 50 g (I$_4$) of seasam seeds, the distinctive characteristic and level of preference of Imjasootang were examined through the analyses of the proximate composition, fatty acid contents, color index, turbidity, brix$^{\circ}$, and sensory evaluation. 1. The proximate composition of Imjasootang was 90.2∼95.1% of total moisture, 0.985∼1.271% of crude protein, 0.90∼0.98% of crude fat, 1.592∼2.456% of nonfiber, 0.003∼0.004% of fiber, and 0.77∼0.97% of crude ash. Fatty acid were composed of 15.15∼17.36% of saturated fatty acid and 79.73∼82.54% of unsaturated fatty acid. Imjasootang contains high level of oleic acid and linoleic acid which were dependant on the content of seasame seeds. 2. For color index of samples, the lightness ranged 47.2∼56.9, “a”values 1.82∼2.15%, and “b”values 15.5∼16.5%. The turbidity of samples ranged 39∼61%, in which I$_4$ (chicken stock 100 g+sesame seed 50 g+water 25 g) was the most turbid. Solid content was also the highest in I$_4$, ranging 1.4∼5.1%. 3. In sensory evaluation, all sesame seed Imjasootangs had no significance differences in appearance. The higher the level of sesame seed in Imjasootangs, the more Imjasootang was preferred in terms of nutty aroma, color nutty taste. and viscosity. I$_4$ had the strongest nutty aroma. I$_2$ (chicken stock 100 g+sesame seed 30 g+water 15 g) and I$_3$ (chicken stock 100 g+sesame seed 40 g+water 20 g) were the best in the overall preference.

• Journal of the Korean Ceramic Society
• /
• v.30 no.5
• /
• pp.397-403
• /
• 1993

Widely used dielectrics, barium titanate was promising material for ceramic capacitor. It was produced by specific formulation with various dopants-La2O3, ZrO2, SnO2, CaZrO3, CaTiO3, CaSnO3, Bi2O3, and etc.-according to demanded properties of capacitor. In this study, we would examinate the study of dielectric properties and temperatuer characteristics (T.C.) with the amount of Bi2O3. The sample was prepared with [BaTiO3]10＋[BaZrO3, SnO2, La2O3, ZrO2]10 and Bi2O3 varied from 1.0, 1.5, 2.0, 2.5 to 3.0wt%. After milling and mixing for 15hrs, each sample was dried and then pressed at 700kg/$\textrm{cm}^2$ into pellets. Pellets were fired at 131$0^{\circ}C$, for 3hrs in air. As the result of measurements, dielectric constant, break down voltage, and insulation resistance were increased with the amount of Bi2O3, and the resonant frequency was shifted from high frequency to low frequency range. In the case of temperature characteristics, capacitance change rate was symmetrically changed at -$25^{\circ}C$ and ＋85$^{\circ}C$ respectively. Therefore, it is recognized that the temperature characteristics can be moderated with doping Bi2O3 in our study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.51-56
• /
• 2015

The object of this study is to obtain the optimum mix proportion of halogen free compound with flame resistance and, for the purpose, thermal/electrical characteristics test are conducted using compatibilizing agents, flame resistance agents, hydroxide aluminum, sunscreen, antioxidant and silicon oil on the base resin of linear low density polyethylene (LLDPE), Ethylene vinyl acetate copolymer (EVA). Existing compound method accompanies many requirements to be satisfied including a lot of addition of flame resistance agents, prohibition of impact on mixing capability with base and property and etc. In this study, different from the existing method, the optimum mix proportion is determined and experimented by adding nano clay. Oxygen index test shows no difference between specimens while T-6, T-9 shows oxygen index of 29[%] and 26[%], respectively. This is concluded that hydroxide aluminum, which is a flame resistance agent, leads low oxygen index. From UL94-V vertical flame resistance test, the combustion behavior is determined as V-0, Fail based on UL94-V decision criteria. Viscometry shows low measurements in specimens with separate addition of compatibilizing agents or nano clay. Volume resistivity test shows low measurement mainly in specimens without compatibilizing agents. Therefore, with the flame resistance compound shows better performance for thermal/electrical property and the optimum mix proportion are achieved among many existing materials.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.190-199
• /
• 2020

Globally, more super-tall buildings tend to be constructed competitively in the social and economic foundations. In the circumstance, this study is aimed at establishing a paradigm of super-tall buildings in terms of their various forms. Symbolizing a city or state, super-tall buildings not only are used as resources of tourism, but play an important role as a characteristic landmark. Therefore, it is necessary to find a curved form for a futuristic perspective. The purpose of this study is to infer the convergence relativity of curved forms among complex and diverse unstructured construction forms. This study used as subjects 50 super-tall buildings among the ranking data selected Council on Tall Buildings and Urban Habitat (CTBUH) in order for the basis of constructability related to actual design, rather than the way of recognizing a formative type, in the classification of curved forms into regularized surfaces, developable surfaces, and double-curved surfaces. The results of this study are presented as follows. This classification can be used as a fundamental material which is reasonably involved in the design process pursuing diverse curved surfaces in terms of design of tall buildings.

• Clean Technology
• /
• v.11 no.4
• /
• pp.171-179
• /
• 2005

Biodiesel is synthesized by transesterification of vegetable or animal oils with alcohols. Since it has similar characteristic with diesel fuel, it can be used as a fuel by mixing with diesel fuel. Moreover, it is advantageous that biodiesel can reduce air pollution emitted from fuel combustion and is produced from sustainable energy, biomass. Recently, many researchers have investigated biodiesel synthesis using supercritical methanol since it is economical due to shorter reaction time and simple separation/purification process, compared with conventional alkali- or acid-catalyzed process. By the development of biodiesel production process from waste edible oil using supercritical methanol, it can be expected to utilize potential energy resources, reduce carbon dioxide emission, and improve environmental conditions.

• Applied Biological Chemistry
• /
• v.41 no.5
• /
• pp.367-371
• /
• 1998

The characteristics of four samples of noodle flours milled from Australian Standard White(ASW) wheat were compared with one sample of noodle flour prepared from a blend of hard red winter(HRW) and western white(WW) American wheats. The ASW flours had lower content of protein and ash. Farinograms revealed that the absorption of the ASW flours was slightly higher than that of the HRW-WW flour. The mixing time, however, showed no difference between ASW flours and HRW-WW flour. The stability and the mechanical tolerance index were different among ASW flours, which were lower than HRW-WW flour. The ratios of resistance to extention determined by extensigraph for ASW flours were higher except one flour than HRW-WW flour. The flours showed characteristic mean particle sizes, which may reflect the differences in hardness of wheat used in the flour production. Farinograph indices showed no correlations with protein content and extensigraph indices. The amylograph peak viscosity was inversely correlated with the protein content (p<0.05).

• Preventive Nutrition and Food Science
• /
• v.16 no.3
• /
• pp.267-271
• /
• 2011

Static Headspace Gas Chromatographic analysis was used to study the partitioning behavior of five organic printing ink solvents between chocolate cookie/air systems. Three cookie sample formulations varied with respect to chocolate type and overall percentage of constituents. Major considerations involved differences in fat content and type and resulting variability in chemical and physical structure. Each of the solvents studied (ethyl acetate, hexane, isopropanol, methyl ethyl ketone, toluene) represents a general class of printing ink solvents based on predominate functional group. Values of the partitioning coefficient (Kp) were determined at equilibrium using measured quantities of both solvent and cookie sample in closed systems at temperature of 25, 35, and $45^{\circ}C$. In each of the three cookies at the three test temperatures, toluene always exhibited the greatest value of partitioning to cookie and hexane always exhibited the least. Results also showed that the partitioning behavior of solvents is generally inversely related to temperature and that solvent affinity, though constant for a particular cookie type over all test temperatures, varies significantly among the three cookie types. The preference of each of the five solvents for each cookie sample was also found to vary with temperature. No correlation was found between the extent of partitioning and cookie formulation or physical characteristic of solvent. The Hildebrand parameter, related to ${\Delta}Hmix$ (heat of mixing), may be used to describe differences in partitioning based on the overall potential of a solvent/cookie interaction to occur. The potential for interaction is dependent upon the chemical structure of the cookie sample and thus the availability of 'active-sites' required for a given solvent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.168-168
• /
• 2008

Dimension of a transistor has rapidly shrunk to increase the speed of device and to reduce the power consumption. However, it is accompanied with several problems like direct tunneling through the gate dioxide layer and low conductivity characteristic of poly-Si gate in nano-region. To cover these faults, study of new materials is urgently needed. Recently, high dielectric materials like $Al_2O_3$, $ZrO_2$, and $HfO_2$ are being studied for equivalent oxide thickness (EOT). However, poly-Si gate is not compatible with high-k materials for gate-insulator. Poly Si gate with high-k material has some problems such as gate depletion and dopant penetration problems. Therefore, new gate structure or materials that are compatible with high-k materials are also needed. TiN for metal/high-k gate stack is conductive enough to allow a good electrical connection and compatible with high-k materials. According to this trend, the study on dry etching of TiN for metal/high-k gate stack is needed. In this study, the investigations of the TiN etching characteristics were carried out using the inductively coupled $BCl_3$-based plasma system and adding $Cl_2$ gas. Dry etching of the TiN was studied by varying the etching parameters including $BCl_3$/Ar gas mixing ratio, RF power, DC-bias voltage to substrate, and $Cl_2$ gas addition. The plasmas were characterized by optical emission spectroscopy analysis. Scanning electron microscopy was used to investigate the etching profile.

• Journal of the Korean Society of Costume
• /
• v.43
• /
• pp.259-282
• /
• 1999

To analyze the characteristics of Orientalism which is expressed in the fashion of the 1990's this study was examined according to three aspects such as form textiles and pattern and the aspects was considered with regard to Chinese Indian Japanese Korean, Southeas Asian and North African style. 1. In form Orientalism which is influenced by latest other fashion trend; Naturalism and Minimalism is expressed as a comfortable casual style which simplifies the way of wearing and mixes the characteristic elements of folk costume with western costume. The way of layerd wearing like knotting wrapping draping and the symbolic from which is inspired by the unique are of each country are shown. 2. In textiles Chinese Japanese and Indian silk as well as Southeast Asian and North African cotton show a splendid oriental impression using vivid color. On the other hand the linens of Korea like hemp and ramie emphasize natural characteristics and show a simple and unartificial oriental beauty. But in the use of material and color it shows a remarkable tendency to break the preconceived idea by coordinating a luxurious silk with a practical denim or harmonizing technical new-masterials with traditional materials. 3. In pattern the decorative elements of Orientalism such as a traditional pattern skills to dye embroidery and other decorations are emphasized on the form of western costume. The sketchy patterns of Chinese Korean and Japanese styles which include the pattern of a flower a bamboo and a butterfly are expressed using embroidery or textile printing. The geometrical seriate patterns of Southeast Asian and North African styles use traditional dyeing methods like Batik. Also the Indian technique of decoration like Mirro Work satisfies handcrafted royalty and feminine romantic taste in modern minimal fashion. The Orientalism expressed in the fashion of 1990's emphasizes the characteristics of people wearing colthing which break the preconceived idea by simplifying the form harmonizing differences between oriental and western cultures and mixing the elements of traditional costumes among countries. Most of all. Ethno using geonmetrical seriate pattern and technical new metal material and Romantic Ethnic using flower embroidery precious stones and beads are appearing as a distinctinve feature.

• Journal of the Korean Society of Costume
• /
• v.61 no.8
• /
• pp.18-31
• /
• 2011

Gianni Versace was a designer who established his unique fashion world by thinking creatively and using rich design sources. The purpose of this study is to present designers a methodology for creative and characteristic design development by searching Gianni Versace's idea source for fashion design. As a method of the study, visual and textual data were investigated for Versace's fashion and design source especially focusing on those elements that inspired him. Versace was born in the southern area of Italy in 1946. Ever since his childhood, he had a lot of experience with clothes because his mother was a dressmaker. His first collection was made in 1978, and Versace became one of the most famous fashion designers in the world within 20 years. He used a wide range of design sources such as history, culture, and art and created his design world with it. He focused on four important epochs. They were classicism, Byzantium, the eighteenth century centering on Baroque, and the 1920s and 1930s centering on Madeleine Vionnet and Madame Gres. Among cultural elements, costume design for ballet and opera and rock 'n' roll music inspired him greatly. Also, Pop art and various paintings such as Chagall's and Delaunay's had a huge effect on Versace. With these elements, he created a bold and unique coordination of style by mixing & matching history, genre, material, and style into his design. Thus he completed an extraordinary and original fashion style by emphasizing on decorative and glamorous points and changing a way of thinking.