• 제목/요약/키워드: Mixed oxide catalyst

검색결과 60건 처리시간 0.029초

Solid-State 51V NMR and Infrared Spectroscopic Study of Vanadium Oxide Supported on $ZrO_2-WO_3$

  • 손종락;이만호;도임자;배영일
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권8호
    • /
    • pp.856-862
    • /
    • 1998
  • Vanadium oxide catalyst supported on ZrO2-WO3 was prepared by adding the Zr(OH)4 powder into a mixed aqueous solution of ammonium metavanadate and ammonium metatungstate followed by drying and calcining at high temperatures. The characterization of prepared catalysts was performed using solid-state 51V NMR and FTIR. In the case of calcination temperature at 773 K, for the samples containing low loading V2O5 below 18 wt % vanadium oxide was in a highly dispersed state, while for samples containing high loading V2O5 equal to or above 18 wt % vanadium oxide was well crystallized due to the V2O5 loading exceeding the formation of monolayer on the surface of ZrO2-WO3. The ZrV2O7 compound was formed through the reaction Of V2O5 and ZrO2 at 873 K and the compound decomposed into V2O5 and ZrO2 at 1073 K, which were confirmed by FTIR and 51V NMR.

혼합 금속산화물 촉매에서 글리세롤의 수소화 분해반응을 통한 프로필렌 글리콜의 합성 (Synthesis of Propylene Glycol via Hydrogenolysis of Glycerol over Mixed Metal Oxide Catalysts)

  • 김동원;문명준;류영복;이만식;홍성수
    • 청정기술
    • /
    • 제20권1호
    • /
    • pp.7-12
    • /
    • 2014
  • 이원계 및 삼원계 금속산화물 촉매에서 프로필렌 글리콜의 글리세롤의 전환반응을 행하였다. Cu/Zn 및 Cu/Cr 혼합산화물 촉매에서는 단일 금속 산화물에 비해 글리세롤의 전환율과 프로필렌 글리콜의 선택도가 증가하였다. 또한, Cu/Zn 촉매에 Al이 첨가된 혼합산화물 촉매에서는 글리세롤의 전환율과 프로필렌 글리콜의 선택도가 매우 크게 증가하였다. 반응온도가 증가함에 따라 글리세롤의 전환율은 점차 증가하지만 프로필렌 글리콜의 선택도는 $200^{\circ}C$에서 최대값을 보이다가 $250^{\circ}C$에서는 오히려 감소하였다. 글리세롤의 농도가 커질수록 글리세롤의 전환율과 프로필렌 글리콜의 선택도가 감소하였다.

Ni/SiO2-Al2O3 복합 산화물 촉매 상에서 에탄올의 직접 아민화 반응에 의한 선택적 아세토니트릴 합성 (Selective Synthesis of Acetonitrile via Direct Amination of Ethanol Over Ni/SiO2-Al2O3 Mixed Oxide Catalysts)

  • 김한나;신채호
    • Korean Chemical Engineering Research
    • /
    • 제59권2호
    • /
    • pp.281-295
    • /
    • 2021
  • Si/(Si + Al) 몰비를 30 몰%까지 변화시켜 제조한 SiO2-Al2O3 복합 산화물(SA) 상에 니켈을 함침법으로 제조한 촉매 상에서 에탄올의 아민화반응에 미치는 영향을 연구하였다. 제조된 촉매의 물리·화학적 특성을 알아보기 위하여 X-선 회절분석(XRD), N2 흡착분석, 이소프로판올 승온탈착(IPA-TPD), 에탄올 승온탈착(EtOH-TPD), 수소 승온환원(H2-TPR), H2 화학흡착, 투과전자현미경(TEM) 분석을 수행하였다. SA 복합 산화물 상에서 Si/(Si + Al) = 30 몰%가 될 때까지 지속적으로 산점이 증가하였다. 담지된 Ni 금속의 분산도, 비표면적 및 산 특성 등이 촉매 반응활성에 복합적으로 영향을 미쳤다. 산점 증가와 니켈 산화물의 낮은 환원 온도는 아세토니트릴 생성에 유리하게 작용하는 것으로 사료된다. 에탄올의 전환율 측면에서는 10 wt% Ni이 담지된 Si/(Si + Al) = 10 몰% 촉매가 가장 높은 전환율을 보였으며 이를 기준으로 화산형 형태를 나타냈고, Ni 금속 분산도와 경향이 일치했다.

구리복합산화물 촉매상에서 일산화탄소의 산화반응 (CO oxidation Reaction over copper metal oxide catalysts)

  • 이학범;고형림
    • 한국응용과학기술학회지
    • /
    • 제33권1호
    • /
    • pp.129-135
    • /
    • 2016
  • Cu-Mn과 Cu-Zn 촉매를 침전제로 다르게 하거나, 금속의 몰비율, 소성온도를 다르게 하여 공침법으로 제조하였고 CO산화반응을 수행하여 혼합산화물 촉매에서 Cu, Mn 과 Zn의 영향 및 소성온도가 미치는 영향을 조사하였다. 촉매의 물리 화학적 특성을 알아보기 위하여 XRD, $N_2$ 흡착 및 SEM의 분석을 수행하였다. $Na_2CO_3$로 침전시켜 $270^{\circ}C$로 소성하여 제조한 2Cu-1Mn 산화물 촉매가 저온에서 CO 산화반응 활성이 가장 좋았으며 2Cu-1Mn 산화물 촉매는 $43m^2/g$으로 가장 높은 비표면적과 촉매 활성을 나타내었다. XRD로 촉매의 결정구조를 분석하였을 때 $Cu_{0.5}Mn_{2.5}O_4$의 결정구조를 갖는 촉매는 낮은 활성을 보였다. $270^{\circ}C$에서 소성한 촉매가 좋은 활성을 나타냈으며 Pt 촉매와 비교하여도 저온에서 CO산화반응이 더욱 우수함을 알 수 있었다.

혼합가스 주입형 연료전지를 위한 전지 디자인 (Cell Design for Mixed Gas Fuel Cell)

  • 박병탁;윤성필
    • 한국세라믹학회지
    • /
    • 제42권12호
    • /
    • pp.860-864
    • /
    • 2005
  • In this study, we fabricated honeycomb type Mixed-Gas Fuel Cell (MGFC) which has advantages of stacking to the axial direction and increasing volume power density. Honeycomb-shaped anode with four channels was prepared by dry pressing method. Two alternative channels were coated with electrolyte and cathode slurry in order to make cathodic reaction sites and the others were filled with partial oxidation (POX) catalyst to increase fuel conversion. Furthermore we employed the sol-gel technique which can increase cell performance and decrease carbon coking.

AICoPd (1/1/0.05) 및 AICoFe (1/1/2)의 혼합금속산화물 촉매에 의한 NO, $N_2O$$O_2$의 흡탈착 특성 연구 (Adsorption-Desorption Characteristics of NO, $N_2O$ and $O_2$ over Mixed Oxide Catalysts of AlCoPd (1/1/0.05) and AlCoFe (1/1/2))

  • 한아름;황영애;장길상
    • 청정기술
    • /
    • 제17권2호
    • /
    • pp.142-149
    • /
    • 2011
  • 혼합금속산화물인 AlCoPd (1/1/0.05) 및 AlCoFe (1/1/2) 촉매의 Lean $NO_x$ Trap (LNT) 적용을 위하여 NO 및 $N_2O$에 대한 흡착 및 탈착 특성을 살펴보았다. 이들은 NO 및 $N_2O$에 대해 산화 과정 없이도 NO를 잘 흡착하는 성능을 나타냈다. 산소가 공존하는 복합 성분의 흡착에서는 흡착량이 많이 떨어졌지만 NO의 경우 산소대비 높은 선택성과 흡착능을 유지한 반면 $N_2O$의 선택성과 흡착능은 급격히 떨어지는 양상을 나타냈다. 또한 TPD로 살펴본 탈착 특성에서는 고온 영역에서 NO 및 $N_2O$성분이 분해되며 생성된 산소 성분 등이 높은 온도에서도 촉매에 강하게 결합되어 있는 것으로 파악되었다.

복합전도성 세라믹 분리막의 탄화수소 직접분해에 의한 고순도 수소와 탄소 제조 (Development of Mixed Conducting Ceramic Membrane for High Purity Hydrogen and Carbon Production from Methane Direct Cracking)

  • 김지호;최덕균;김진호;조우석;황광택
    • 한국수소및신에너지학회논문집
    • /
    • 제22권5호
    • /
    • pp.649-655
    • /
    • 2011
  • Methane direct cracking can be utilized to produce $CO_x$ and $NO_x$-free hydrogen for PEM fuel cells, oil refineries, ammonia and methanol production. We present the results of a systematic study of methane direct cracking using a mixed conducting oxide, Y-doped $BaZrO_3$ ($BaZr_{0.85}Y_{0.15}O_3$), membrane. In this paper, dense $BaZr_{0.85}Y_{0.15}O_3$ membrane with disk shape was successfully sintered at $1400^{\circ}C$ with a relative density of more 93% via addition of 1 wt% ZnO. The ($BaZr_{0.85}Y_{0.15}O_3$) membrane is covered with Pd as catalyst for methane decomposition with an DC magnetron sputtering method. Reaction temperature was $800^{\circ}C$ and high purity methane as reactant was employed to membrane side with 1.5 bar pressure. The $H_2$ produced by the reaction was transported through mixed conducting oxide membrane to the outer side. In addition, it was observed that the carbon, by-product, after methane direct cracking was deposited on the Pd/ZnO-$BaZr_{0.85}Y_{0.15}O_3$ membrane. The produced carbon has a shape of sphere and nanosheet, and a particle size of 80 to 100 nm.

Mo-Al 복합 산화물의 질화반응 처리된 촉매상에서 암모니아 촉매 분해반응 (Catalytic Ammonia Decomposition on Nitridation-Treated Catalyst of Mo-Al Mixed Oxide)

  • 백서현;윤경희;신채호
    • Korean Chemical Engineering Research
    • /
    • 제60권1호
    • /
    • pp.159-168
    • /
    • 2022
  • MoO3 비율을 10-50 중량비로 변화하여 제조한 Mo-Al 복합 산화물 상에서 소성 후 승온 질화반응을 통하여 얻은 Mo-Al 질화물 상에서 암모니아 분해반응에서의 촉매 활성을 검토하였다. 제조된 촉매의 물리·화학적 특성을 알아보기 위하여 N2 흡착분석, X-선 회절분석(XRD), X-선 광전자분석법(XPS), 수소 승온환원(H2-TPR), 투과전자현미경(TEM) 분석을 수행하였다. 600 ℃에서 소성 후 Mo-Al 복합산화물은 γ-Al2O3와 Al2(MoO4)3 결정상을 나타냈으며 질화반응 후의 질화물은 비정형 형태를 보여주었다. 질화반응 후의 비표면적은 MoO3의 위상전환반응에 의해 Mo 질화물 형성으로 인해 증가하였으며, Mo 질화물이 γ-Al2O3에 담지된 형태를 보여주었다. 암모니아 분해반응에서의 촉매 활성은 40 wt% MoO3가 가장 좋은 활성을 보여주었고, 질화반응 시간이 증가함에 따라 활성이 증가하였으며 이에 따라 활성화에너지 감소 효과를 나타냈다.

P123-Templated Co3O4/Al2O3 Mesoporous Mixed Oxides for Epoxidation of Styrene

  • Jung, Mie-Won;Kim, Young-Sil
    • 한국재료학회지
    • /
    • 제22권6호
    • /
    • pp.316-320
    • /
    • 2012
  • $Co_3O_4$, $Al_2O_3$ and $Co_3O_4$/$Al_2O_3$ mesoporous powders were prepared by a sol-gel method with starting matierals of aluminum isopropoxide and cobalt (II) nitrate. A P123 template is employed as an active organic additive for improving the specific surface area of the mixed oxide by forming surfactant micelles. A transition metal cobalt oxide supported on alumina with and without P123 was tested to find the most active and selective conditions as a heterogeneous catalyst in the reaction of styrene epoxidation. A bBlock copolymer-P123 template was added to the staring materials to control physical and chemical properties. The properties of $Co_3O_4$/$Al_2O_3$ powder with and without P123 were characterized using an X-ray diffractometer (XRD), a Field-Emission Scanning Electron Microscope (FE-SEM), a Bruner-Emmertt-Teller (BET) surface analyzer, and $^{27}Al$ MAS NMR spectroscopy. Powders with and without P123 were compared in catalytic tests. The catalytic activity and selectivity were monitored by GC/MS, $^1H$, and $^{13}C$-NMR spectroscopy. The performance for the reaction of epoxidation of styrene was observed to be in the following order: [$Co_3O_4$/$Al_2O_3$ with P123-1173 K > $Co_3O_4$/$Al_2O_3$ with P123-973 K > $Co_3O_4$-973 K>$Co_3O_4$/$Al_2O_3$-973 K > $Co_3O_4$/$Al_2O_3$ with P123-1473 K > $Al_2O_3$-973 K]. The existence of ${\gamma}$-alumina and the nature of the surface morphology are related to catalytic activity.

침전법으로 제조된 CuO-CeO2 혼합산화물에서 벤젠의 촉매연소반응 (Catalytic Combustion of Benzene over CuO-CeO2 Mixed Oxides Prepared by Co-precipitation Method)

  • 홍성수
    • 공업화학
    • /
    • 제25권3호
    • /
    • pp.312-317
    • /
    • 2014
  • 공침전법으로 제조된 CuO-$CeO_2$ 혼합산화물 촉매에서 벤젠의 촉매연소 반응에 대해 연구하였다. CuO-$CeO_2$ 혼합산화물 촉매들은 침전제 및 CuO 전구체를 달리하여 제조하였고, XRD, BET, XPS 및 $H_2-TPR$에 의해 특성분석을 하였다. 침전제의 종류에 상관없이 CuO 피크가 $2{\Theta}=35.5^{\circ}$$38.5^{\circ}$에서 뚜렷하게 나타났다. $NH_4OH$를 침전제로 사용하여 제조한 Cu/(Cu+Ce)의 몰비율이 0.35인 촉매가 가장 높은 활성을 보여주었다. 또한, 수소로 전처리하면 벤젠 연소반응의 활성이 증가하였고, $400^{\circ}C$에서 수소로 전처리한 촉매가 가장 높은 활성을 보여주었다.