• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.997-999
• /
• 1999

We fabricated white light-emitting organic electroluminescent device which have a mixed single emitting layer containing poly(N-vinylcarbazole)[PVK], tris(8-hydroxyquinoline)aluminum[Alq3] and poly(3-hexylthiophene)[P3HT] and investigated the emission properties of it. We expect to obtain a blue light from PVK, green light from Alq3 and red light from P3HT The fabricated device emits white light over 18V with slight orange light. We think that the energy transfer in a mixed layer occurred from PVK to $Alq_3$ and P3HT resulted in decreasing the blue light intensity from PVK. With mixing of N, N'-diphenyl-N, N'-(3-methylphenyl)-[1,1'-biphenyl]-4, 4'-diamine[TPD], hole transport material, to the emitting layer, the luminance intensity of device was increased 50 times than that of the device which not contain TPD. We find that the efficiency of the white light electroluminescent device can be improved by injecting electron more effectively and blue light need to improve the color purity of white light.

• Journal of Welding and Joining
• /
• v.18 no.5
• /
• pp.105-111
• /
• 2000

The wear behavior of thermal sprayed AlSiMg-40TiC composite coatings were studied as a function of load and sliding velocity under unlubricated conditions. Experiments were performed using a block-on-ring(WC-6wt%/Co, Hv 1500) type. The tests were carried out a various load(30∼ 125.5N) and sliding velocity(0.5∼2.0m/s). Three wear rate regions were observed in the AlSiMg-40TiC composite coatings. The wear rate in region I at low load (less then 8N( were less than 1×{TEX}$10^{-5}${/TEX}㎣/m. Low wear rates in region I resulted from the load-bearing capacity of TiC particles. The transition from region I to II occurred when the applied load exceeded the fracture and pull-out strength of the particles. The TiC fractured particles trapped between the specimen and the counterface acted as third-body abrasive wear. The subsurface layer worn surface in region II was composed of the mechanically mixed layer (MML). The wear rate increase abruptly above a critical load (region III). The high wear rate in region III was induced by frictional temperature and involves massive surface damage.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.1
• /
• pp.20-27
• /
• 2018

We describe a redox-enhanced electric double-layer capacitor (EDLC) that turns the electrolyte in a conventional EDLC into an integral, active component for charge storage-charge is stored both through faradaic reactions with soluble redox-active molecules in the electrolyte, and through the double-layer capacitance in a porous carbon electrode. The mixed-redox electrolyte, composed of vanadium and iodides, was employed to achieve high power density. The electrochemical reaction in a supercapacitor with vanadium and iodide was studied to estimate the charge capacity and energy density of the redox supercapacitor. A redox supercapacitor with a mixed electrolyte composed of 0.75 M NaI and 0.5 M $VOSO_4$ was fabricated and studied. When charged to a potential of 1 V, faradaic charging processes were observed, in addition to the capacitive processes that increased the energy storage capabilities of the supercapacitor. The redox supercapacitor achieved a specific capacity of 13.44 mAh/g and an energy density of 3.81 Wh/kg in a simple Swagelok cell. A control EDLC with 1 M $H_2SO_4$ yielded 7.43 mAh/g and 2.85 Wh/kg. However, the relatively fast self-discharge in the redox-EDLC may be due to the shuttling of the redox couple between the polarized carbon electrodes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.220-220
• /
• 2023

단순한 하상 변동 모형은 단일한 입경으로 구성된 하상재료를 다루는 데에 비해, 실제 하천에서는 다양한 입경의 유사가 섞여있다. 이러한 혼합 입경의 유사 이송을 모의하고자 하면 퇴적층의 생성과 소멸을 어떻게 모의하는지에 대한 기법이 중요해진다. 과거 연구에서는 유수의 영향을 받는 하상 두께가 입도 분포에 따라 다르다고 생각하였다. 반면, 다른 연구들에서는 두께가 합리적인 범위 내에 있다면 모의 결과에 영향을 미치지 않는다고 보고 상수로 설정하였다. 퇴적층의 개수를 어떻게 고려하느냐에 따라서도 모의기법이 나누어진다. 단일한 입경을 모의하는 경우 단일 퇴적층을 고려하지만, 혼합 입경을 고려하는 모형은 크게 2개의 퇴적층(active layer와 non-active layer)으로 나누는 종류와 3개 이상의 퇴적층을 고려하는 모형으로도 나눌 수 있다. 이 연구에서는 혼합 입경의 유사 이송을 모의할 수 있는 전 지형 발달 모형을 활용하여 퇴적층 처리 기법의 차이가 얼마나 모의 결과에 영향을 주는지를 파악하였다. 모의 결과는 기법이 바뀜에 따라 매우 민감하게 변하는 것을 확인할 수 있었다. 또한 이 연구에서는 3개 이상의 퇴적층을 고려함에 있어서 기존 퇴적층에 새로운 물질이 퇴적되었을 때 경계면에서 입자가 섞이는 mixed layer를 고려하는 개념을 제시한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.67-68
• /
• 2008

A simple bi-layer structure of organic light emitting diode (OLED) was used to study the characteristics of anode preparation. Indium tin oxide (ITO) anode surface treatment of OLEDs was performed to get the optimum condition for the ITO anode. The ITO surface was treated by $O_2$ or $O_2$ / Ar mixed gas plasma with different processing time. The electrical characteristics of OLED were improved by plasma treatment. The operating voltage of OLED with $O_2$ or $O_2$/Ar mixed gas plasma treated anodes decreases from 8.2 to 3.4 V and 3.2V, respectively. The $O_2$ /Ar mixed gas plasma treatment results in better electrical property.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.101-109
• /
• 2017

This paper presents a high-throughput low-complexity 512-point eight-parallel mixed-radix multipath delay feedback (MDF) fast Fourier transform (FFT) processor architecture for orthogonal frequency division multiplexing (OFDM) applications. To decrease the number of twiddle factor (TF) multiplications, a mixed-radix $2^4/2^3$ FFT algorithm is adopted. Moreover, a dual-path shared canonical signed digit (CSD) complex constant multiplier using a multi-layer scheme is proposed for reducing the hardware complexity of the TF multiplication. The proposed FFT processor is implemented using TSMC 90-nm CMOS technology. The synthesis results demonstrate that the proposed FFT processor can lead to a 16% reduction in hardware complexity and higher throughput compared to conventional architectures.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.220-226
• /
• 1998

In this pater, a method of strength evaluation applying fracture mechanics in adhesively bonded joints of A1/A1 materials was investigated. Various adhesively bonded joints of double-cantilever beam with a interfacial crack in its adhesive layer were prepared for the fracture toughness test of comprehensive mixed mode conditions from nearly pure mode I to mode II. The experiment of fracture toughness was carried out under various mixed mode conditions with an interfacial crack and critical energy release rate, Gc by the experimental measurements of compliances was determined. From the results, fracture toughness on mixed mode with an interfacial crack is well characterized by strain energy release rate and a method of strength evaluation by the fracture toughness in adhesively bonded joints of A1/A1 materials was discussed.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11b
• /
• pp.300-315
• /
• 2005

Recently plasma surface-cleaning or surface-etching techniques have been focused in the respect of decontamination of spent or used nuclear parts and equipment. In this study decontamination rate of metallic cobalt surface was experimentally investigated via its surface etching rate with a $CF_4-O_2$ mixed gas plasma and metallic surface wastes of cobalt oxides were simulated and decontaminated with $NF_3$ - Ar mixed gas plasma. Experimental results revealed that a mixed etchant gas with about $80{\%}\;CF_4-20{\%}\;O_2$ gives the highest reaction rate of cobalt disk and the rate reaches with a negative 300 DC bias voltage up to $0.43\;{\mu}m$/min at $380^{\circ}C$ and $20{\%}\;NF_3-80\%$ Ar mixed gas gives $0.2\;{\mu}m$/min of reaction rate of cobalt oxide film.

• Water Engineering Research
• /
• v.3 no.3
• /
• pp.155-162
• /
• 2002

This study presents the theoretical approach for volume concentration, velocity profile, and granular discharge on the fluid-granule mixed flow downstream of the scour hole at the outlet of the hydraulic structure. Concept of dilatant model was applied for the stress-strain relationships of fluid-granule mixed flow since the flow downstream of the scour hole corresponds to debris flow, where momentum transfers through particle collisions. Mathematical formulations were derived using momentum equation and stress-strain relation of the fluid-granule mixture. Velocity profile under the assumption of uniform concentration over flowing layer showed the downward convex type. Deposition angle of downstream hump was found to be a function of an upstream slope angle, a dynamic friction angle and a volume concentration irrespective of flow itself, Granular discharge and the overflow depth were obtained with given values of inflow rates. Experimental results showed relatively good agreements with theoretical ones.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.735-739
• /
• 2005

Presented is a voltammetric study of co-adsorption of irreversibly adsorbing Sb and Te on Pt(111). When a layer of Sb and Te was formed via simultaneous adsorption, the reduction peak of Te was observed at 0.30 V in the initial cathodic scan. In contrast, sequential adsorption of Sb followed by Te adsorption led to a Te reduction peak at 0.50 V in the initial scan. As the voltammetric scan was continued, in addition, the voltammogram of the simultaneously co-adsorbed layer changed, while that of the sequentially co-adsorbed layer did not. These observations are discussed in terms of formation of a homogeneously mixed layer and a layer consisting of heterogeneously separated domains of Sb and Te. Also, the difference in the adsorption strength of Sb and Te was observed.