• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.687-695
• /
• 2005

A bandpass sampling technique, which is a method directly downconverting a bandpass signal to a baseband or a low IF signal without analog mixers, can be an alterative choice for the SDR system to minimize the RF front-end. In this paper, a complex bandpass sampling technique for two bandpass-filtered signals is proposed. We derived generalized formulae for the available sampling range, the signal's IF and the minimum sampling frequency taking into consideration the guard-bands for the multiple RE signals. Thru the simulation experiments, the advantages of the . complex bandpass sampling over the pre-reported real bandpass sampling are investigated for applications in the SDR design.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.21
• /
• pp.81-90
• /
• 1990

In stratified random sampling a simple random sample must be taken in each stratum to reduce the maximum gain in precision given the minimum cost. The purpose of this paper is to deal with the propertics of the estimates and variances and obtain the economic design of stratified random sampling through the optimum allocation of the sample sizes. In addition, the between stratum variation and the within stratum variation is stratifying the population are described.

• Journal of Ecology and Environment
• /
• v.35 no.4
• /
• pp.301-306
• /
• 2012

Determination of the minimum population size is an important component for the ex situ conservation of an endangered species. Here, we present the identification of collection strategies that most efficiently captured the genetic diversity of Brasenia schreberi J.F. Gmelin (water-shield) in natural populations from the mainland (MGC) and Jeju Island (JNS) of South Korea, using amplified fragment length polymorphism (AFLP) markers. A total of 313 and 383 polymorphic bands were detected in the MGC and JNS populations, respectively. All of the 140 sampled ramets were distinguishable by the presence of distinct AFLP phenotypes. According to the simulation of the individual sampling by maximization sampling, 25 and 28 individuals captured all of the genetic diversity in the MGC population (mainland of South Korea) and the JNS population (Jeju Island), respectively. The level of genetic diversity of the core collections was similar to the entire collection, indicating that the core collections very well represent the diversity of the entire collection. We therefore suggest a management unit of B. schreberi based on the genetic information for assessing the minimum population size for its ex situ conservation.

• Journal of Korean Society for Quality Management
• /
• v.11 no.1
• /
• pp.18-23
• /
• 1983

Continuous sampling plans CSP-1(i,f)'s with which AOQL is guaranteed, can be applied to the cases in need of effective sampling without stopping the process or dividing batches during production. But the plans that can guarantee the same AOQL value are too many. Therefore we have to select one plan among them. There may be a lot of ways to choose it. This paper connects with various sampling costs, the concept to try to detect the shift of process average under fractional inspection in CSP-1,to find a minimum cost sampling plan among several CSP-1 sampling plan alternatives (i, f)'s with the same AOQL value.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.120-126
• /
• 2011

The fatigue damages in structural details of offshore plants can be accumulated due to various environmental loadings such as swell, wave, wind and current. It is known that load histories acting on mooring and riser systems show stationary and ergodic bimodal wide-banded process. This paper provides refined approach to obtain time signals representing stress range histories from wide-banded bimodal spectrum which consists of ideally narrow-banded and fully separated two spectrums. Variations of the probabilistic characteristics for time signals according to frequency and sampling time increments are compared with the reference data to be the probabilistic characteristics such as zero-crossing period, peak period, and irregularity factor obtained from an assumed ideal spectrum. It is proved that the sampling time increment more affects on the probabilistic characteristics than frequency increment. The fatigue damages according to the frequency and sampling time increments are also compared with the ones with minimum increment condition which are thought to be exact fatigue damage. It is concluded that the maximum sampling time increment to obtain reliable time signals should be determined that ratio of applied maximum sampling time increment and minimum period is less than approximately 0.08.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1249-1256
• /
• 2006

This paper proposes, based on a bandpass sampling theory, a novel method to find valid sampling frequency range and minimum sampling rate with low computational complexity for downconversion of multiple bandpass radio frequency (RF) signals. Guard-bands or spacing between adjacent downconverted signal spectrums are also taken into consideration in determining sampling frequency for practical implementation. Moreover, we verify through comparison with other method that the proposed method has more advantageous properties.

• Journal of Korean Society for Quality Management
• /
• v.10 no.2
• /
• pp.25-33
• /
• 1982

We discuss a model for acceptance/rejection decision regarding finite populations. The model is based on a beta-binomial prior distribution and additive costs -- relative sampling costs, relative sorting costs and costs of accepted defectives. A substantial part of the paper is devoted to constructing a Bayes sequential sampling acceptance plan (BSSAP) for attributes under the model. It is shown that the Bayes fixed size sampling acceptance plans (BFSAP) are better than the Hald's (1960) single sampling acceptance plans based on a uniform prior. Some tables and examples are provided for comprisons of the minimum Bayes risks of the BSSAP and those of the BFSAP based on a uniform prior and the model.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.74-96
• /
• 2002

The objectives of this study is to suggest the rectifying sampling inspection plan considering quality cost. Limiting quality level(LQL) plans(also called LTPD plans) and outgoing quality(OQ) plans are considered. The Hald's linear cost model is discussed with and without a beta prior for the distribution of the fraction of nonconforming items in a lot. It is assumed that the sampling inspection is error free. We consider the design of reliability acceptance sampling plan (RASP) for failure rate level qualification at selected confidence level. The lifetime distribution of products is assumed to be exponential. MIL-STD-690C and K C 6032 standards provide this procedures. But these procedures have some questions to apply in the field. The cost of test and confidence level(1-$\beta$ risk) are the problem between supplier and user. So, we suggest that the optimal life test sampling inspection plans using simple linear cost model considering product cost, capability of environment chamber, environmental test cost, and etc. Especially, we consider a reliability of lots that contain some nonconforming items. In this case we assumed that a nonconforming item fail after environmental life test. Finally, we develope the algorithm of the optimal sampling inspection plan based on minimum costs for rectifying inspection and RASP. And computer application programs are developed So, it is shown how the desired sampling plan can be easily found.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.852-857
• /
• 2013

In this paper we propose a design algorithm for nonbinary LDPC (low-density parity-check) codes with low error-floors. The proposed algorithm determines the nonbinary values of the nonzero entries in the parity-check matrix in order to maximize the binary minimum distance of the designed nonbinary LDPC codes. We verify the performance of the designed nonbinary LDPC codes in the error-floor region by Monte Carlo simulation and importance sampling over BPSK (binary phase-shift keying) modulation.

• The Korean Journal of Applied Statistics
• /
• v.14 no.1
• /
• pp.13-24
• /
• 2001

In this paper, we investigated mean estimation methods in two-phase sampling. Under the fixed expected cost we reviewed the optimal sample sizes, minimum variances and approximate unbiased variance estimators for usual ratio estimator, stratified sample mean with proportional allocation and Rao's allocation of the second phase sample. Also we proposed combined ratio estimator, which uses both ratio estimation and stratification and derived optimal sample size, minimum variance and unbiased variance estimator. Through a limited simulation study, we compared estimators by design effects and came to know that ratio estimator is more efficient than stratified sample mean in some cases and inefficient in the other cases, but combined ratio estimator is more efficient than others in most cases.