• Journal of the Korean housing association
• /
• v.18 no.3
• /
• pp.51-61
• /
• 2007

This study is aimed to provide a guide for PC use space in apartment. To achieve this, a design about PC use space which was considered adequate location, area, form was suggested. As methods of the study, survey research method and case study. The survey was taken by five hundred-eighty-nine people who used PCs in apartment from May 2005 to July 2005 in JeJu Special Self-governing Province for an analysis of data. The results of the survey were showed PC use space situation and furnitures layout patterns. The case was classified by unit plans of size, and it showed design example of PC use space. In types of $61{\sim}69$ square meters ($m^2$), PC use space was located in dead-space in the residence with minimum scale, because of $61{\sim}69$ square meters types are smaller than the other types. In types $100{\sim}129$ square meters, PC use space which was divided with a partition panel was located in the livingroom expanding the room space to the balcony. In types of 130 square meters, PC use space was located in the room of sons or daughters which was arranged with other furniture. The adequate area of PC use space is $1.4{\sim}2.2$ square meters, and it should take into account furniture size and human active sphere. And PC use space of form should consider traffic line, personal space and privacy. Besides it is required of ergonomic design in chair, table in its scale. And it is necessary development of systematic furniture for PC use space.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.86-91
• /
• 2006

This study is aimed to provide a guide for PC use space in apartment. To achieve this, a design about PC use space which was considered adequate location, area, form was suggested. As methods of the study, survey research method and case study. The survey was taken by five hundred-eighty-nine people who used PCs in apartment from May 2005 to July 2005 in Je-Ju province for an analysis of data. The results of the survey were showed PC use space situation and furnitures layout patterns. The case was classified by unit plans of size, and it showed design example of PC use space. In case of the 20s pyeong(about 3.30 square meters) type, PC use space was located in dead-space in the residence with minimum scale, because of 20s pyeong types are smaller than the other types. In case of the 30s pyeong type, PC use space which was divided with a partition panel was located in the livingroom expanding the room space to the balcony. In case of the 40s pyeong type, PC use space was located in the room of sons or daughters which was arranged with other furniture. The adequate area of PC use space is 1.4$^{\sim}$2.2 square meters, and it should take into account furniture size and human active sphere. And PC use space of form should consider traffic line, personal space and privacy. Besides it is required of ergonomic design in chair, table in its scale. And it is necessary development of systematic furniture for PC use space.

• Physical Therapy Korea
• /
• v.24 no.3
• /
• pp.40-46
• /
• 2017

Background: The active knee extension (AKE) test commonly used to assess the flexibility of the hamstring muscles. Many researchers have tested the reliability of the AKE test; however, no published studies have examined the intrarater and interrater reliability of the AKE test using a PBU. Objects: The purpose of this study was to determine the intrarater and interrater reliability of the AKE test performed with a pressure biofeedback unit (PBU) on healthy subjects. Methods: Sixteen healthy male participants volunteered and gave informed consent to participate in this study. Two raters conducted AKE tests independently with a PBU. Each knee was measured twice, and the AKE testing was repeated one week after the first round of testing. Results: The interrater reliability's intraclass correlation coefficients ($ICC_{2,1}$) were .887~.986 for the right knees and .915~.988 for the left knees. In addition, the intrarater (test-retest) reliability ($ICC_{3,1}$) values ranged between .820~.915 and .820~.884 for Raters 1 and 2, respectively. The values for the standard error of mesurement were low for all tests ($.81{\sim}2.97^{\circ}$); the calculated minimum detectable change was $2.24{\sim}8.21^{\circ}$. Conclusion: These findings suggest that the AKE test performed with a PBU had excellent interrater and intrarater reliability for assessing hamstring flexibility in healthy young males.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.3
• /
• pp.334-340
• /
• 2011

Turbo-pumps have weak points, such as the pumping operation is unstable on the positive slope of the head curve and/or the cavitation occurs at the low suction head. To improve simultaneously both weak points, the first author invented the unique pumping unit composed of the tandem impellers and the peculiar motor with the double rotational armatures. The front and the rear impellers are driven by the inner and the outer armatures of the motor, respectively. Both impeller speeds are automatically and smartly adjusted in response to the pumping discharge, while the rotational torques between both impellers/armatures are counter-balanced. Such speeds contribute to suppress successfully not only the unstable operation at the low discharge but also the cavitation at the high discharge, as verified with the axial flow type pumping unit in the previous paper. Continuously, this paper investigates experimentally the effects of the tandem impeller profiles on the pump performances and the rotational speeds against the discharge, using the impellers whose loads are low and/or high at the normal discharge. The worthy remarks are that (a) the unstable operation is suppressed as expected and the shut off power is scarcely large in the smart control, (b) the blade profile contributes to determine the discharge giving the maximum/minimum rotational speed where the reverse flow may incipiently appears at the front impeller inlet, (c) the tandem impeller profiles scarcely affect the rotational speeds, while the loads of the front and the rear impellers are same, but (d) the impeller with the low load must run faster and the impeller with the high load must run slower at the same discharge to take the same rotational torque, and (e) the reverse flow at the inlet and the swirling velocity component at the outlet of the front impeller with the high load require making the rotational speed of the rear impeller with low load fairly faster at the lower discharge.

• The Plant Pathology Journal
• /
• v.18 no.2
• /
• pp.68-73
• /
• 2002

The influence of fungicidal spray was assessed on powdery mildew epidemics caused by Erysiphe polygoni D.C. and on yield-attributing characters of mungbean [Vigna radiata (L.) Wilczek]. Mildew attack adversely affected the yield-attributing characters of mungbean and exhibited negative significant correlation with pod length (-0.57), pods/plant (-0.74), pod weight (-0.68), 100 seeds weight (-0.69), 100 seeds swell weight (-0.59), and seed germination (-0.71). These characters had direct or indirect effects on grain yield, which was also adversely affected due to mildew attack (-0.89). Powdery mildew was significantly retarded due to the single spray of carbendazim (0.05%) at 30-day-old crop, where the apparent rate of infection (r) was minimum at 0.0095/ unit/day and with low (11.44%) powdery mildew intensity. Other fungicides like tridemorph (0.075%) and penconazole (0.05%) were equally effective against the mildew disease where the disease intensity was less than 20% and the values of r were 0.0134 and 0.039/unit/day respectively, as compared with the control at 0.267/unit/day. Fungicide spray influenced the yield-attributing characters besides controlling the disease. Such effects were more pronounced in carbendazim (0.05%)-treated plots due to its phytotonic nature where pod length (7.59cm), pods/plant (29.75), pod weight (8.16 g), 100 grain weight (3.94 g), and swell weight of 100 seed (9.49 g) were maximum resulting to the highest yield (480 kg/ha) as compared with that of control (224 kg/ha). Spray of carbendazim also improved seed germination (74.5%). Spray of other fungicides like carbendazim with copper oxychloride in 1:1 ratio, tridemorph (0.075%), and penconazole (0.05%) was equally effective against powdery mildew of mungbean. These fungicides also exhibited positive effects on yield-attributing characters of the crop and finally increased yield. These systemic fungicides were more effective in controlling powdery mildew disease of V. radiata in the rainy season compared with wettable sulphur.

• Korean Journal of Veterinary Research
• /
• v.48 no.3
• /
• pp.267-274
• /
• 2008

This study was to evaluate the efficacy of single dose Mycoplasma hyopneumoniae (M. hyo)-vaccination in the swine farms which had different serological patterns of porcine reproductive and respiratory syndrome virus (PRRSV) and porcine circovirus type 2 (PCV2). A minimum of 240 pigs from each farm was applied, allocating M. hyo vaccinated and control groups. The PRRSV and PCV2 infections were analyzed by serological method (commercial ELISA kit). After administrating pigs a single dose of M. hyo vaccine or control saline at 3 weeks of age, serum antibodies to M. hyo, PRRSV and PCV2 were monitored at 4, 10, 16 and 22 weeks of age. Mortality, weight changes, feed conversion ratio (FCR) and lung score were also evaluated. A single-dose vaccination of M. hyo bacterin was efficacious to reduce mycoplasmal lung lesions and induce good humoral immune response. However, FCR was improved only in one of the three farms where showed seronegative status to both PRRSV and PCV2 in the period from 4 to 16 weeks of age. These results might imply that M. hyo vaccine alone could not overcome the PRRSV and PCV2 infection-associated wasting in the field condition. Therefore, the control of PRRSV and PCV2 should be considered to obtain the better effects of M. hyo vaccination.

• The Journal of Society for e-Business Studies
• /
• v.10 no.2
• /
• pp.21-41
• /
• 2005

An Enterprise Architecture (EA) Framework is a tool which supports implementation of the Enterprise architecture that is used to enhance the interoperability of the IT components. In this paper, we propose a framework named as ENAE (ENterprise Architecture Framework) which combines enterprise architecture unit (AU), reference model, and association relationship between domain model. Architecture Unit is defined as a minimum set of a business process and its associated components such as application system and technical components. An EA can be designed and implemented by the aggregating the related AUs including association relationship between Architecture Units. Because UML model has limitations to describe business domain semantics because it is designed for general purpose, we adapt the DSM (Domain Specific Modeling) concept. We describe association relationship between Architecture Units designed by Domain Specific Modeling through Topic Map. Session 2 describes related works about Enterprise Architecture frameworks, Domain Specific Modeling, and Topic Map, while Session 3 explains components of the ENAF. Finally Session 4 shows the case study for implementation of the new Framework called ENAF.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.1-12
• /
• 2004

Nowadays, a satellite image is widely utilized in identifying and predicting urban spatial growth. It provides essential informations on horizontal expansion of urbanized areas. However, its usefulness becomes very limited in analyzing density of urban development. On the contrary, zonal data, typically census data, provides various density information such as population, number of houses, floor information within a given zone. The problem of the zonal data in analyzing urban growth is that the size of the zone is too big. The minimum administration unit, Dong, is too big to match the satellite images. This study tries to derive synergy effects by matching the merits of the two information sources-- image data and zonal data. For this purpose, basic statistical unit (census block size) is utilized as a zonal unit. By comparing the image and zonal data of 1985 and 2000 of Daegu metropolitan area, this study concludes that urban growth pattern is better explained when the two types of data are properly used.

• Journal of architectural history
• /
• v.22 no.3
• /
• pp.7-14
• /
• 2013

Ikseon-Dong 166 is one of the traditional urban resident area developed during 1930's. The purpose of this research is to analyze the structural relationship between a conventional housing unit plans and modern block plans based on orthogonal geometry. To fully explore the selling point of the new urban development, the planner or real estate developer in private sector did not abandon or compromise the conventional house layouts, consists of single layer of rooms keeping the main room facing south. This study concludes the following factors connecting the urban and architectural plans. Oblong block plans following east-west direction did not allow the southern exposure of courtyard and main room, which was the absolute requirement for traditional house units, the longer side of block plan followed north-south direction as a result. Considering the possibility of rent, having entrance at the east or west side of individual site enables two separate household maintain their spatial privacy. In addition to the factors mentioned above, when the blocks are to be divided into individual addresses, north-south oblong block plans maintained the length to face the front road minimum while the southern exposure maximized. These factors explains why the private developers maintained their blocks elongated to north-south direction when the block plans laied out by public sectors which did not care that much of southern exposure show random orientation in the view point of solar exposure.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.42-53
• /
• 2011

This study is to present a method of compiling consistently accurate construction cost estimates in minimum of time. There are two kind of applications for estimating system based on quantity-per-unit and the daily work-crew. The former system is still applied 45% as a estimating method to construction job site by the second half of 2010. However, it is necessary for quantity-per-unit to complement the defect of standard integrating specification and improve the integrating method to the various construction conditions. The later system is intended to represent a standard or basic core which can be adopted in many type of construction estimating used across the wide variety of construction in advanced countries. In this study daily work-crew based on productivity is applied to the representative B.O.Q Item in road project. These results are compared to productivity of Japan and U.S.A estimated under the similar circumstances.