• Korean Journal of Cleft Lip And Palate
• /
• v.7 no.1
• /
• pp.63-76
• /
• 2004

Cleft lip and palate(CLP) patients usually have midface deficiency and Class III malocclusion. Distraction osteogenesis (DO) has been used recently to correct the maxillary hypoplasia with stable and predictable result. Both external and internal devices that permit midface distraction are available, This case report describes intraoral DO for correction of the midface deficiency in a adult CLP patient with relapse following orthognathic surgery. The purpose of this report is to present advantages of the intraoral DO for the treatment of CLP, The relative and potential clinical indications, treatment planning, patient preparation, and possible vector control for DO are discussed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.2
• /
• pp.169-173
• /
• 2001

Maxillary-malar deficiency is the most frequently occurring midface dentofacial deformity. Clinicaly patients with maxillary-malar deficiency exhibit malar and infraorbital rim deficiency and class III malocclusion. For treatment of these deformities, modified LeFort III osteotomy have been used. Modified LeFort III osteotomy advances maxilla with orbital rims and zygomatic bone anteroposteriorly. This is a case of patient who had severe mandibular prognthism with midface deformity. We performed modified LeFort III osteotomy for maxillary-malar advancement and simultaneous bilateral sagittal split ramus osteotomy for mandibular prognathism and autogenous iliac bone graft.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.143-152
• /
• 2018

Objective: This study examined cone-beam computed tomography (CBCT)-derived multiplanar-reconstructed (MPR) cross-sections to clarify the salient characteristics of patients with skeletal class III malocclusion with midface deficiency (MD). Methods: The horizontal and sagittal plane intersection points were identified for middle-third facial analysis in 40 patients in the MD or normal (N) groups. MPR images acquired parallel to each horizontal plane were used for length and angular measurements. Results: A comparison of the MD and N groups revealed significant differences in the zygoma prominence among female patients. The convex zygomatic area in the N group was larger than that in the MD group, and the inferior part of the midface in the N group was smaller than that in the MD group for both male and female patients. A significant difference was observed in the concave middle maxillary area among male patients. Conclusions: This study was conducted to demonstrate the difference between MD and normal face through MPR images derived from CBCT. Male patients in the MD group had a more flattened face than did those in the N group. Female patients in the MD group showed a concave-shaped lower section of the zygoma, which tended to have more severe MD. These findings indicate that orthognathic surgery to improve skeletal discrepancy requires different approaches in male and female patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.1
• /
• pp.1-4
• /
• 2000

True midfacial deficiency is defined as a hypoplasia of various components of midface such as maxilla, orbit, zygoma and nasal bone. For treatment of these anomalies Le Fort III osteotomy and its modifications have been used traditionally. Le Fort III osteotomy is the method which advances maxilla with nasal bone and zygomatic bone at a time. At first midfacial osteotomy was introduced by Gillies to treatment of dentofacial deformity in 1950. In 1967 Tessier designed Le Fort III osteotomy according to Le Fort III midfacial fracture line and popularized to treat midfacial deficiency using coronal incision to appoach osteotomy sites. This is a case of patient who had mandibular prognathism with midfacial deficiency with severe discrepancy in maxillomandibular interrelation. First we performed Le Fort III osteomomy for zygomaticomaxillary advancement, and then carried out simultaneous two jaw surgery with Le Fort I osteotomy and BSSRO three months after first surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.1
• /
• pp.53-60
• /
• 2009

Maxillary deficiency, anterior cross bite, constriction of maxillary arch, malaligned teeth are frequently observed in patients with cleft lip and palate. Surgery and orthodontics, combined intervention are needed to correct maxillary deficiency. Distraction osteogenesis that currently used has many advantages like less relapse tendency, more advancement of maxilla, capable in growing patients. In case 1, 18 years old girl with BCLP had severe midfacial deficiency and multiple missing of teeth. LeFort I osteotomy, followed by maxillary distraction osteogenesis utilizing rigid external distraction device(RED) system, was performed. After a 6-day latency period, distraction proceeded at a rate of 1mm per day (at 1st week, 1.5mm/day). Total advancement was 19mm. The RED device left in place for the additional 4 weeks for consolidation. After the RED device was removed, face mask was applied with elastic traction for 5 weeks. After achieving acceptable facial appearance and occlusion, orthodontic appliance was removed. The results after 4 years follow-up was sustained pretty well without aggravation of velopharyngeal function. In case 2, 22 years old man with UCLP had severe midfacial deficiency and palatally erupted upper 2nd premolars due to arch length discrepancy, but the anterior segment of maxillary did not show constriction and crowding. patient had no arch width discrepancy, crowding was concentrated on premolar region. Segmental LeFort I osteotomy was performed. After a 6 - day latency period, using internal distraction device, distraction proceeded at a 0.5mm per day(at 1st week, 0.75 - 1 mm/day). Total advancement was 15mm. After internal distraction device was removed, face mask was applied with elastic traction for 4 weeks. After surgical-orthodontic treatment, facial appearance and occlusion was improved pretty good, and after 46 months follow-up the result was retained well.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.3
• /
• pp.225-232
• /
• 2011

Purpose: This study was designed to retrospectively evaluate the postsurgical initial stability of the Le Fort I osteotomy with posterior impaction and rigid internal fixation for the correction of mandibular prognathism with midface deficiency. Particular attention was paid to the magnitude and direction of the initial postsurgical change. Methods: 20 healthy patients with mandibular prognathism and midface deficiency participated in this study. All patients underwent Le Fort I osteotomy with posterior impaction and mandibular setback BSSO by one surgeon. Preoperative (T0), immediate postoperative (T1) and follow-up period (T2) cephalograms were taken and analyzed. Change between T0~T1 and T1~T2 was measured and analyzed. Results: Between T0~T1, significant differences were observed in all measurements except the ANS point and mandibular plane angle. Between T1~T2, only the occlusal plane angle was significantly changed. No significant changes were found in all other measurements. Conclusion: This study indicates that Le Fort I osteotomy with posterior impaction is stable at initial stages. Although changes in the occlusal plane angle were observed, it was caused by tooth movement after post-operative orthodontic treatment. However, more studies with larger samples are required to form definitive conclusions. Conclusion: This study indicates that Le Fort I osteotomy with posterior impaction is stable at initial stages. Although changes in the occlusal plane angle were observed, it was caused by tooth movement after post-operative orthodontic treatment. However, more studies with larger samples are required to form definitive conclusions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.44-50
• /
• 2002

Apert syndrome is a kind of congenital-acrocephalosyndactyly syndrome which was first reported by Apert in 1906 and characterized by its acrocephaly and syndactyly. Clinical characteristic features are cone-shaped skull morphology due to early fusion of coronal suture, fusion of fingers of hands and toes of feet. It is an autosomal dominant-heritable syndrome. Due to hypo-development of midface region, Apert syndrome patients have a tendency to have ocular proptosis, hypertelorism, maxillary deficiency. High palate and soft palate cleft are common findings in these patients. In general, mandibular growth pattern is normal, but relative maxillary deficiency exaggerates mandibular forward position, so relative mandibular prognathism is inevitable. Narrow maxillary and mandibular dental arch worsen teeth alignment and crowding. Skeletal malocclusion and open bite are also common. This is a case report of a Korean 3 year 1 month male Apert syndrome child referred by department of plastic surgeon for the possibility of orthodontic treatment. General features of Apert syndrome, patient's medical history, radiographic evaluation, clinical examination, orthodontic and surgical treatment planning are discussed in this report.

• Korean Journal of Cleft Lip And Palate
• /
• v.14 no.1_2
• /
• pp.19-28
• /
• 2011

Maxillary anterior segmental distraction osteogenesis (DO) has been the alternative treatment option for patients with midfacial retrusion. The patient showed unilateral cleft lip and palate, and premaxillary distraction with rigid external device (RED) was planned to solve midface deficiency and to create alveolar space. Significant advancement of A point was observed, but relapse of A point was detected during consolidation period. The vertical position of the ANS was found to have moved downward. Axis of upper incisor decreased after DO. Maxillary anterior segmental DO is effective for treatment of patient with cleft lip and palate. The alveolar space is regained successfully, and the facial profile is improved without velopharyngeal problems.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.346-355
• /
• 2020

The treatment of skeletal Class III malocclusion in adolescents is challenging. Maxillary protraction, particularly that using bone anchorage, has been proven to be an effective method for the stimulation of maxillary growth. However, the conventional procedure, which involves the surgical implantation of mini-plates, is traumatic and associated with a high risk. Three-dimensional (3D) digital technology offers the possibility of individualized treatment. Customized mini-plates can be designed according to the shape of the maxillary surface and the positions of the roots on cone-beam computed tomography scans; this reduces both the surgical risk and patient trauma. Here we report a case involving a 12-year-old adolescent girl with skeletal Class III malocclusion and midface deficiency that was treated in two phases. In phase 1, rapid maxillary expansion and protraction were performed using 3D-printed mini-plates for anchorage. The mini-plates exhibited better adaptation to the bone contour, and titanium screw implantation was safer because of the customized design. The orthopedic force applied to each mini-plate was approximately 400-500 g, and the plates remained stable during the maxillary protraction process, which exhibited efficacious orthopedic effects and significantly improved the facial profile and esthetics. In phase 2, fixed appliances were used for alignment and leveling of the maxillary and mandibular dentitions. The complete two-phase treatment lasted for 24 months. After 48 months of retention, the treatment outcomes remained stable.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.51-68
• /
• 2001

Midfacial hypoplasia in patients with clefts of the lip and palate is considered to be the result of congenital dysmorphogenesis. And cleft lip and palate developes facial deformity, jaw abnormality, speech problem, which is most frequent hereditary deformity in maxillofacial region. So cleft lip and palate is characterized by midface deformity which shaws maxillary anterior nasal septal deviation and deformity. Our study describes congenital correlates of midfacial hypoplasia by examining the displacement of a normal complement of parts, a triangular tissue deficiency low on the lip border on the columellar side, and a linear deficiency and displacement in the line of the bilateral cleft lip. 15 patients with bilateral cleft lip and palate were taken impression before operation, but the patient who had other abnormalities and complications were excluded. Average age is 3.4 months and they were classified into both complete, both incomplete and complete & incomplete group. The obtained results were as follows 1. There were no differences on intercanthal width and canthal width between each of the groups. 2. Both complete group had longer lateral ala length than both incomplete group, but there were no differences between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 3. Columella length was greater in both incomplete group than in both complete group, but there was no difference between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 4. Both complete group had longer ala width & ala base width than both incomplete group had. But there were no differences between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 5. There were no differences between each of the groups on upper lip length, but nose/mouth width ratio was greater in both complete group than in both incomplete group. 6. Pronasale(pm), subnasle(sn), la~rale superioris(ls), stomion(sto) points were located around the central vertical line of face but deviated to incomplete side in com. & incom. group. 7. Nasal tip protrusion was greater in both incomplete group and com. & incom. group than both complete group, but there was no difference between both incomplete group and com. & incom. group.