• 한국화재소방학회논문지
• /
• 제31권6호
• /
• pp.40-46
• /
• 2017

대도심지의 교통 체증 문제로 발생되는 경제적 손실의 해결방안으로 대심도 지하도로 개발이 국내외적으로 대두되고 있으며, 이 중 일부는 시공성 및 경제성이 뛰어난 복층터널로 계획되고 있다. 그러나 복층터널은 하나의 굴착단면에 중간 슬래브를 설치하여 상 하행선으로 사용하는 특수한 구조로 인해 일반 터널보다 층고가 낮게 설치되어 터널내에서 발생되는 화재사고 및 환기 문제에 대해 비교적 취약하다. 따라서, 복층터널의 방재적 약점을 극복하기 위해서는 복층터널에 최적화된 방재 설비구축 연구가 국내에서도 체계적으로 수행되어야 한다. 본 연구에서는 복층터널 화재 안전성 향상을 위해 화재발생시 초기 화재 진압 및 확산 방지가 가능한 자동모니터 소화설비를 개발하였으며, 차량화재 진압 실험을 통해 성능시험을 수행하였다. 그 결과로부터 30 m 거리의 차량내부화재 및 10 m 거리의 엔진룸 화재에 대해 화재 확산 방지 및 진압 효과를 확인하였다.

• 한국실내디자인학회논문집
• /
• 제21호
• /
• pp.107-113
• /
• 1999

The purpose of this study is to suggest the materials for developing the new house style by analysing the space characteristics of wood frame houses in suburbs of Seoul. For this, we analysed 45 drawings(site plan, floor plan, elevation, section) that were designed by MICHOO, WOOD-LAND, STUGA and CHOWONJUTECK company etc. The space design characteristics that we found are as follows; 1. The wood is fragile to humidity. Therefore this characteristic is especially considered in designing the space of bathroom and utility room. 2. It is the merit of wood frame house that inner space can be designed variously by using spilt-level and the slope of roof. 3.The public space and private space are completely separated in most cases and the stair is located in the middle of house. This structure of house is short of horizontal openness. Instead, most houses gets vertical openness by making second floor on the living room opev. 4. In wood frame house as the rural house, the outer space is well used by setting up deck and balcony. The outer spaces like deck and balcony are usually used as a part of life space in connected with living room, dining room, master bed room and family room. 5. The public spaces like kitchen, living room, dining room and family room are considered so important in design that those are arranged in front in order to have good outlook and directiov.

• Wind and Structures
• /
• 제10권6호
• /
• pp.555-576
• /
• 2007

Statistical analysis on the measured responses of a suspension bridge deck (Law, et al. 2007) show that vibration response at the first torsional mode of the structure has a significant increase at and beyond the critical wind speed for vortex shedding as noted in the wind tunnel tests on a sectional model. This paper further analyzes the measured responses of the structure when under typhoon conditions for any possible vortex shedding events. Parameters related to the lifting force in such a possible event and the vibration amplitudes are estimated with a single-degree-of-freedom model of the system. The spatial correlation of vortex shedding along the bridge span is also investigated. Possible vortex shedding events are found at both the first torsional and second vertical modes with the root-mean-square amplitudes comparable to those predicted from wind tunnel tests. Small negative stiffness due to wind effects is observed in isolated events that last for a short duration, but the aerodynamic damping exhibits either positive or negative values when the vertical angle of wind incidence is beyond ${\pm}10^{\circ}$. Vibration of the bridge deck is highly correlated in the events at least in the middle one-third of the main span.

• Steel and Composite Structures
• /
• 제35권4호
• /
• pp.475-494
• /
• 2020

Presented are experimental results from 24 full-scale push test specimens to study the behaviour of composite beams with trapezoidal profiled sheeting laid transverse to the beam axis. The tests use a single-sided horizontal push test setup and are divided into two series. First series contained shear loading only and the second had normal load besides shear load. Four parameters are studied: the effect of wire mesh position and number of its layers, placing a reinforcing bar at the bottom flange of the deck, normal load and its position, and shear stud layout. The results indicate that positioning mesh on top of the deck flange or 30 mm from top of the concrete slab does not affect the stud's strength and ductility. Thus, existing industry practice of locating the mesh at a nominal cover from top of the concrete slab and Eurocode 4 requirement of placing mesh 30 mm below the stud's head are both acceptable. Double mesh layer resulted in 17% increase in stud strength for push tests with single stud per rib. Placing a T16 bar at the bottom of the deck rib did not affect shear stud behaviour. The normal load resulted in 40% and 23% increase in stud strength for single and double studs per rib. Use of studs only in the middle three ribs out of five increased the strength by 23% compared to the layout with studs in first four ribs. Eurocode 4 and Johnson and Yuan equations predicted well the stud strength for single stud/rib tests without normal load, with estimations within 10% of the characteristic experimental load. These equations highly under-estimated the stud capacity, by about 40-50%, for tests with normal load. AISC 360-16 generally over-estimated the stud capacity, except for single stud/rib push tests with normal load. Nellinger equations precisely predicted the stud resistance for push tests with normal load, with ratio of experimental over predicted load as 0.99 and coefficient of variation of about 8%. But, Nellinger method over-estimated the stud capacity by about 20% in push tests with single studs without normal load.

• 동력기계공학회지
• /
• 제17권4호
• /
• pp.23-30
• /
• 2013

In this paper, the payload condition is considered and computer simulation is carried out to analyze the dynamic behavior of the middle-sized truck under the condition with different weight and location. The computer model for the truck is established and ADAMS/Car is employed to simulate the truck vehicle. A single lane change and bump-pass simulation are performed to evaluate the performance according to the weight and the position of it. Effects of the location and weight of commercial vehicle are analyzed. According to the simulation results, the front deck is preferred as the load location.

• Smart Structures and Systems
• /
• 제10권2호
• /
• pp.131-154
• /
• 2012

In this paper, it is aimed to determine the seismic behaviour of highway bridges by nondestructive testing using ambient vibration measurements. Eynel Highway Bridge which has arch type structural system with a total length of 216 m and located in the Ayvaclk county of Samsun, Turkey is selected as an application. The bridge connects the villages which are separated with Suat U$\breve{g}$urlu Dam Lake. A three dimensional finite element model is first established for a highway bridge using project drawings and an analytical modal analysis is then performed to generate natural frequencies and mode shapes in the three orthogonal directions. The ambient vibration measurements are carried out on the bridge deck under natural excitation such as traffic, human walking and wind loads using Operational Modal Analysis. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, two output-only system identification techniques are employed namely, Enhanced Frequency Domain Decomposition technique in the frequency domain and Stochastic Subspace Identification technique in time domain. Analytical and experimental dynamic characteristic are compared with each other and finite element model of the bridge is updated by changing of boundary conditions to reduce the differences between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of highway bridges. After finite element model updating, maximum differences between the natural frequencies are reduced averagely from 23% to 3%. The updated finite element model reflects the dynamic characteristics of the bridge better, and it can be used to predict the dynamic response under complex external forces. It is also helpful for further damage identification and health condition monitoring. Analytical model of the bridge before and after model updating is analyzed using 1992 Erzincan earthquake record to determine the seismic behaviour. It can be seen from the analysis results that displacements increase by the height of bridge columns and along to middle point of the deck and main arches. Bending moments have an increasing trend along to first and last 50 m and have a decreasing trend long to the middle of the main arches.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.45-52
• /
• 2020

상판과 아치리브, 수직재로 구성된 개복식 상로 아치교는 아치리브 지점 조건과 차량 이동속도에 따라 지점에서의 축력과 모멘트의 정도가 달라진다. 또한 충격계수 정의에는 상판 변위응답뿐만 아니라 다양한 종류의 응답이 고려된다. 본 논문은 양단 고정지점 콘크리트 개복식 상로 아치교에 대해 측정 위치와 응답변수, 수직재의 간격비에 따른 충격계수를 분석하였다. 수직재 간격비가 1/9.375인 기저모델의 경우 이동하중 진입 반대 쪽 아치리브 지점에서 모멘트 기반 충격계수가 가장 큰 값을 보였으며, 이 값은 상판 중앙부 인접지간 변위응답 기반 최대 충격계수와는 비슷한 수준이지만 동일 위치에서의 축력 기반 충격계수에 비해 19% 높은 값이다. 수직재 배열에 있어서 간격비를 기저모델에 비해 1/2로 감소시켰을 경우, 모멘트 기반 최대 충격계수는 기저모델과 유사한 수준이었지만 간격비를 2배 증가시켰을 경우는 기저모델 대비 4.4배 증가하였다.

• 한국해양공학회지
• /
• 제1권1호
• /
• pp.57-64
• /
• 1987

Methods of nonlinear stochastic analysis of guyed towers are studied in this paper. Two different kinds of nonlinearities are considered. They are the nonlinear restoring force from the guying system and the nonlinear hydrodynamic force. Analyses are carried out mainly in the frequency domain using linearization techniques. Two methods for the linearization of the nonlinear stiffness are presented, in which the effects of the steady offset and the oscillating component of the structural motion can be adequately analyzed. those two methods are the equivalent linearization method and the average stiffness method. The linearization of the nonlinear drag force is also carried out considering the effect of steady current as well as oscillatory wave motions. Example analyses are performed for guyed tower in 300m water. Transfer functions and the expected maximum values of the deck displacement and the bending moment near the middle of the tower are calculated. Numerical results show that both of the frequency domain methods presented in this paper predict the responses of the sturcture very reasonably compared with those by the time integration method utilzing the random simulations wave particla motions.

• Steel and Composite Structures
• /
• 제12권5호
• /
• pp.413-426
• /
• 2012

In this paper, nonlinear static analysis of three-dimensional cable stayed bridges is performed for the time dependent materials properties such as creep, shrinkage and aging of concrete and relaxation of cable. Manavgat Cable-Stayed Bridge is selected as an application. The bridge located in Antalya, Turkey, was constructed with balanced cantilever construction method. Total length of the bridge is 202 m. The bridge consists of one $\ddot{e}$ shape steel tower. The tower is at the middle of the bridge span. The construction stages and 3D finite element model of bridge are modeled with SAP2000. Large displacement occurs in these types of bridges so geometric nonlinearity is taken into consideration in the analysis by using P-Delta plus large displacement criterion. The time dependent material strength and geometric variations are included in the analysis. Two different finite element analyses carried out which are evaluated with and without construction stages and results are compared with each other. As a result of these analyses, variation of internal forces such as bending moment, axial forces and shear forces for bridge tower and displacement and bending moment for bridge deck are given with detailed. It is seen that construction stage analysis has a remarkable effect on the structural behavior of the bridge.

• Structural Engineering and Mechanics
• /
• 제39권4호
• /
• pp.521-539
• /
• 2011

Jilin highway concrete bridge is located in the center of Jilin City, which is positioned in the middle part in Jilin Province in the east north of China. This bridge crosses the Songhua River and connects the north and the south of Jilin City. The main purpose of damages inspection of the bridge components is to ensure the safety of a bridge and to identify any maintenance, repair, or strengthening which that need to be carried out. The damages that occur in reinforced concrete bridges include different types of cracks, scalling and spalling of concrete, corrosion of steel reinforcement, deformation, excessive deflection, and stain. The main objectives of this study are to inspect the appearance of Jilin highway concrete bridge and describe all the damages in the bridge structural members, and to evaluate the structural performance of the bridge structure under dead and live loads. The tests adopted in this study are: (a) the depth of concrete carbonation test, (b) compressive strength of concrete test, (c) corrosion of steel test, (d) static load test, and (e) dynamic load test. According to the damages inspection of the bridge structure appearance, most components of the bridge are in good conditions with the exception arch waves, spandrel arch, deck pavement of new arch bridge, and corbel of simply supported bridge which suffer from serious damages. Load tests results show that the deflection, strain, and cracks development satisfy the requirements of the standards.