Abstract
An open-spandrel arch bridges, which consists of slab deck, arch rib, and vertical members, shows a various level of moment and axial forces according to the supporting boundary condition of arch rib and vehicle speeds. Also, the definition of impact factor accepts any kind of response parameters, not only displacement response at slab deck. The present study considers concrete open-spandrel arch bridges constrained with fixed conditions at the ends of arch rib and investigates the impact factor variation due to moving load speeds, response parameters, measuring locations, and vertical member spacing ratio of the bridges. The results of Reference model show that the impact factor is biggest when the reactive moment resulted at the vehicle-inducing opposite end of the arch rib is applied. The peak impact factor is a similar level obtained for the middle of the span adjacent to the slab deck center, but it is 19% higher than the peak impact factor calculated using the axial force developed at the same location. Reducing the spacing ratio of the vertical members as half as the reference model whose ratio is 1/9.375 produces a similar level of the moment-based peak impact factor compared to the reference model. However, when the spacing ratio is doubled, the peak impact factor is 4.4 times greater than the reference model.
상판과 아치리브, 수직재로 구성된 개복식 상로 아치교는 아치리브 지점 조건과 차량 이동속도에 따라 지점에서의 축력과 모멘트의 정도가 달라진다. 또한 충격계수 정의에는 상판 변위응답뿐만 아니라 다양한 종류의 응답이 고려된다. 본 논문은 양단 고정지점 콘크리트 개복식 상로 아치교에 대해 측정 위치와 응답변수, 수직재의 간격비에 따른 충격계수를 분석하였다. 수직재 간격비가 1/9.375인 기저모델의 경우 이동하중 진입 반대 쪽 아치리브 지점에서 모멘트 기반 충격계수가 가장 큰 값을 보였으며, 이 값은 상판 중앙부 인접지간 변위응답 기반 최대 충격계수와는 비슷한 수준이지만 동일 위치에서의 축력 기반 충격계수에 비해 19% 높은 값이다. 수직재 배열에 있어서 간격비를 기저모델에 비해 1/2로 감소시켰을 경우, 모멘트 기반 최대 충격계수는 기저모델과 유사한 수준이었지만 간격비를 2배 증가시켰을 경우는 기저모델 대비 4.4배 증가하였다.