• Journal of Korean Vacuum Science & Technology
• /
• 제3권1호
• /
• pp.59-65
• /
• 1999

There has been an interest to develop an efficient, compact microwave device using field-emitter-arrays (FEA)-based cathode. Toe valuate the optimum device-efficiency in a compact size, the propagation properties of the premodulated electron beam for the FEA-based cathode is studied in detail by the computer simulation using a PIC code, MAGIC. For the premodulated electron beam whose phase of the energy leads the phase of the current by $\pi$/2, the amplitude of the downstream current modulation can be kept as high as the initial modulation level. Using the beam parameters with the beam voltage of 6kV and the current of 2.0A, 30% of efficiency is predicted when the quality factor of 800 is chosen. the device length is reduced about twice compared with that of the conventional device. The design of practical planar cathode is carried out to meet the minimum diameter of the electron beam as 0.5 mm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.501-501
• /
• 2012

A 2.45 GHz electron cyclotron resonance (ECR) plasma source with a belt magnet assembly configuration (BMC) was developed for hyperthermal neutral beam (HNB) generation. A plasma source for high flux HNB generation should be satisfied with the requirements: low pressure operation, high density, and thin plasma. The ECR plasma source with BMC achieved high density at low operation pressure due to electron confinement enhancement caused by high mirror ratio and drifts in toroidal direction. The 2.45 GHz microwave launcher had a circularly bended WR340 waveguide with slits. The microwave E-field profile induced by the microwave launcher was studied in this paper. The E-field profile was a cups field perpendicular to B-filed at ECR zone. The optimized E-field profile and B-field were found for effective ECR heating.

• 소성∙가공
• /
• 제31권1호
• /
• pp.29-38
• /
• 2022

Recently, the composite material market is gradually growing. Various composite forming processes have been developed in order to reduce the production cost of the composite material. Unlike the conventional forming process, the microwave composite forming process has the advantage of reducing the processing time because the composite material is heated directly or indirectly at the same time. Due to this advantage, in this study, a double cantilever beam test was conducted with specimens manufactured by the microwave composite forming process. The purpose of this study was to compare mode-I energy release rate for specimens manufactured by prepreg compression forming and microwave composite forming processes. First, a microwave oven was proposed to conduct the microwave composite forming process. Double cantilever beam specimens were manufactured. After that, the double cantilever beam test was conducted to obtain the mode-I energy release rate. Mode-I energy release rates of specimens manufactured by the microwave composite forming and prepreg compression forming processes were then compared. As a result, mode-I energy release rates of specimens fabricated by the microwave composite forming process were similar to those fabricated with the prepreg compression forming process with a relatively reduced process time.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.897-903
• /
• 2009

We have designed the backward wave oscillator. A power-pulsed generator oscillated at 24 GHz has higher frequency than current one. It is very inportant to prevent microwave from going into the beam diode, since intence microwave will harmfully affect beam generation. Due to the axial mode operation, there exist a critial value of beam energy for the oscillation. By changing the condition at the SWS end, an enhanced performance of the K-band oversized BWO is observed in a low magnetic field region about 0.8T.

• 한국전자파학회논문지
• /
• 제13권3호
• /
• pp.279-287
• /
• 2002

본 논문에서는 광대역에서 광각을 조양할 수 있는 대칭형 구조의 선형 우상배열 송신기용 초고주파 렌즈를 설계하였다. 선형 위상 배열 송신기의 정확한 빔 조향 특성을 얻기 위해 렌즈의 균일한 진폭 전달 특성을 얻는데 중점을 두었다. 빔 포트 8개, 배열 포트 8개로 구성된 초고주파렌즈의 입.출력 포트간 삽입손실의 편차는 $\pm$3.1㏈로써 6~18㎓ 대역에 대해 매우 균일한 특성을 얻었다. 8개로 선형 배열된 안테나를 이용해 방위각 $\pm$60$^{\circ}$의 조향 특성을 얻을 수 있음을 확인하였으며, 측정한 렌즈 특성과 다중빔 조향 패턴을 제시하였다.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1061-1070
• /
• 2009

본 논문에서는 전기적으로 크기가 큰 능동 위상 배열 안테나에서 발생하는 빔-편이(beam-squint)현상을 해결할 수 있는 시간 지연기를 설계 및 제작하고, 측정 결과를 고찰한다. 시간 지연기는 4-bit 스위치로 제어되는 마이크로스트립 라인으로 설계되었으며, 시간 지연 구조의 손실을 보상해 주기 위해 송수신 경로에 MMIC 증폭기 모듈을 추가하였다. 시간 지연기의 측정을 통해 지연 상태별 이득 및 위상, P1dB, 수신 잡음 지수 등의 전기적 성능 규격을 만족함을 확인하였다. 또한, 제작된 시간 지연기의 성능 검증을 위해 측정 결과를 광대역 능동위상 배열 안테나에 적용하여 빔 패턴 보정 효과를 확인하였다. X 밴드 대역에서 800 MHz 대역차를 갖는 675.8 mm 크기의 안테나에 대해 빔 편이 현상을 보정해 본 결과 ${\pm}0.1^{\circ}$이던 주파수에 따른 조향각 오차가 ${\pm}0.1^{\circ}$ 이내로 줄어드는 효과를 확인하였으며, 향후 광대역 능동 위상 배열 안테나 시스템에 적용 가능성을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.224-230
• /
• 2010

Wireless power transmission (WPT) is useful technology in near future. There are some kinds of the WPT technologies, WPT via radio waves, resonance coupling, and inductive. Especially the WPT via radio waves is used for multi-purposes from short range to long range application. However, unfortunately it is misunderstood that it is low efficiency and low power. In this paper, I show the theory of beam efficiency between transmitting antennas and receiving antennas and also show some high efficient applications of the WPT via radio waves. Especially, I pick up a wireless power charging system of an electric vehicle and show the experimental results. I show difference between the theory of beam efficiency and the experimental results of short range WPT. I indicate that reasons of poor beam efficiency in the experiment are (1) change of impedance caused by mutual coupling between transmitting antennas and receiving antennas, (2) oblique direction of microwave power to receiving antennas caused by short distance.

• ETRI Journal
• /
• 제41권6호
• /
• pp.850-862
• /
• 2019

This work investigated three-dimensional (3D) focused microwave thermotherapy (FMT) at 925 MHz for a human tissue mimicking phantom using the time reversal (TR) principle for musculoskeletal disorders. We verified the proposed TR algorithm by evaluating the possibility of 3D beam focusing through simulations and experiments. The simulation, along with the electromagnetic and thermal analyses of the human tissue mimicking phantom model, was conducted by employing the Sim4Life commercial tool. Experimental validation was conducted on the developed FMT system using a fabricated human tissue mimicking phantom. A truncated threshold method was proposed to reduce the unwanted hot spots in a normal tissue region, wherein a beam was appropriately focused on a target position. The validation results of the simulation and experiments obtained by utilizing the proposed TR algorithm were shown to be acceptable. Effective beam focusing at the desired position of the phantom could be achieved.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.281-282
• /
• 2010

The microwave power supply is mainly composed of the cathode power supply supplying the beam voltage and beam current of the gyrotron and body power supply for the single depressed collector (SDC) operation, which requires the cathode voltage/current of 80 kV/24 A for the cathode and +24 kV for the body. This paper is describing the power supply system for the gyrotron of KSTAR.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.208-213
• /
• 2008

In this study, helical antenna with microwave ZST ceramics was designed using finite element method and developed. Studied parameters are relative dielectric constant of the dielectric core and the width of the conduction metal band of the antenna. As shown in the results, the center frequency of the antenna was decreased as the dielectric constant increased. Also beam width of the antenna increased as both the dielectric constant and the conduction band width increased. Based on the designed optimal shape, the manufactured antenna has the good beam width at center frequency 1.58 GHz.