• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.63-65
• /
• 1985

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.7-12
• /
• 2004

Due to the very fast switching speed of Josephson junctions, superconductive digital circuit has been a very good candidate fur future electronic devices. High-speed and Low-power microprocessor can be developed with Josephson junctions. As a part of an effort to develop superconductive microprocessor, we have designed an RSFQ 4-bit ALU (Arithmetic Logic Unit) in a pipelined structure. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in this work consisted of three DC current driven SFQ switches and a half-adder. We successfully tested the half adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached switches at the input ports to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this setup, 1-bit block of ALU was successfully tested up to 40 GHz. An RSFQ 4-bit ALU was fabricated and tested. The circuit worked at 5 GHz. The circuit size of the 4-bit ALU was 3 mm ${\times}$ 1.5 mm, fitting in a 5 mm ${\times}$ 5 mm chip.

• Nuclear Engineering and Technology
• /
• v.44 no.6
• /
• pp.697-708
• /
• 2012

The majority of instrumentation and control (I&C) systems in today's nuclear power plants (NPPs) are based on analog technology. Thus, most existing I&C systems now face obsolescence problems. Existing NPPs have difficulty in repairing and replacing devices and boards during maintenance because manufacturers no longer produce the analog devices and boards used in the implemented I&C systems. Therefore, existing NPPs are replacing the obsolete analog I&C systems with advanced digital systems. New NPPs are also adopting digital I&C systems because the economic efficiencies and usability of the systems are higher than the analog I&C systems. Digital I&C systems are based on two technologies: a microprocessor based system in which software programs manage the required functions and a programmable logic device (PLD) based system in which programmable logic devices, such as field programmable gate arrays, manage the required functions. PLD based systems provide higher levels of performance compared with microprocessor based systems because PLD systems can process the data in parallel while microprocessor based systems process the data sequentially. In this research, a bistable trip logic in a reactor protection system (RPS) was developed using very high speed integrated circuits hardware description language (VHDL), which is a hardware description language used in electronic design to describe the behavior of the digital system. Functional verifications were also performed in order to verify that the bistable trip logic was designed correctly and satisfied the required specifications. For the functional verification, a random testing technique was adopted to generate test inputs for the bistable trip logic.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.5
• /
• pp.297-305
• /
• 2006

Trace-driven simulation is widely used for measuring the performance of a microprocessor in its initial design phase. However, since it requires much time and disk space, the statistical simulation has been studied as an alternative method. In this paper, statistical simulations are performed for a high performance superscalar microprocessor with a perceptron-based multiple branch predictor. For the verification, various hardware configurations are simulated using SPEC2000 benchmarks programs as input. As a result, we show that the statistical simulation is quite accurate and time saving for the evaluation of microprocessor architectures with multiple branch prediction.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.428-430
• /
• 2011

Recent semiconductor design technology has been substantially developed that we can design a micro-system on a chip as well as implementing an application specific IC in an FPGA. SPARTAN-3E developed by Xilinx is equipped with an FPGA that holds as much as 500 thousand transistors connected with MicroBlaze softcore microprocessor bus system. In this paper, we discuss a method of implementing an embedded system using the SPARTAN-3E. We also explain the peripherals and the bus protocols and the expandability of this kind of embedded systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.990-994
• /
• 2003

This paper describes the VoIP(Voice over Internet Protocol) SoC(System on Chip) Design and the test board development for the function verification to support voice communication services using Internet. To implement the simple system of configuration, we designed the VoIP SoC which have ARM922T of 32bit microprocessor, IP network interface, voice signal interface, various user interface function. Also we developed test program and communication protocol to verify the function of this chip. We used several tools of design and simulation, developed and tested a test board with Excalibur which includes ARM922T microprocessor and FPGA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1289-1295
• /
• 2007

In this paper, we implemented high-performance concurrent control system which manages whole RF systems with digital type and communicates with remote station on both wire and wireless networking. It consists of FPGA (Field Programmable Gate Array) part which controls forward/reverse LPA (Linear Power Amplifier), forward/reverse LNA (Low Noise Amplifier), channel cut wire/wireless TCP/IP, etc, master microprocessor (AVR), which manages the whole control system, Slave microprocessor which communicates SA (Spectrum Analyzer) and observes frequency spectrum of each channel with the resolution of 5KHz, 10 channel card microprocessor which independently observes each channel card and sets frequency synthesizer in channel cut and other peripherals and logics. The whole system is divided to two parts of H/W (hardware) and S/W (software) considering operational efficiency and concurrency, and implementation and cost. H/W consists of FPGA and microprocessor. We expected the optimized operation through H/W and SW co-design and hybrid H/W architecture.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.1
• /
• pp.51-59
• /
• 2010

Apartment complex, buildings, markets and department stores have inner parking lots which can accept many cars but drivers waste lots of times to find the empty parking spaces in crowding parking lots. In this paper, we proposed the inner parking information support system based on microprocessor which can decrease roaming times to find vacant parking spot in confusing parking lots through notice monitor and provide SMS to make it easy to find parked place. Proposed system consist with RFID system for detecting access of cars, microprocessor system for processing data of checking existence of cars on parking spots and communicating with server, and server system which processes information of cars' in and out, guides empty parking spots and parked location to drivers. Suggested system is realized by handmade model parking lot size of 8 cars, and we confirmed practicality by providing information using parking notice monitor and single message service.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.337-344
• /
• 2003

In this paper, we introduce a fully synthesizable 32-bit embedded microprocessor core called the AE32000B. The AE32000B core is based on the extendable instruction set computer architecture, so it has high code density and a low memory access rate. In order to improve the performance of the core, we developed and adopted various design options, including the load extension register instruction (LERI) folding unit, a high performance multiply and accumulate (MAC) unit, various DSP units, and an efficient coprocessor interface. The instructions per cycle count of the Dhrystone 2.1 benchmark for the designed core is about 0.86. We verified the synthesizability and the area and time performances of our design using two CMOS standard cell libraries: a 0.35-${\mu}m$ library and a 0.18-${\mu}m$ library. With the 0.35-${\mu}m$ library, the core can be synthesized with about 47,000 gates and operate at 70 MHz or higher, while it can be synthesized with about 53,000 gates and operate at 120 MHz or higher with the 0.18-${\mu}m$ library.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.1
• /
• pp.79-84
• /
• 2008

Proposed EEFL inverter design method with Dimming control to use microprocessor. Reduce power loss using Energy Recovery method, and design inverter control program that use RS-232 communication. Also, low temperature driving time shortened 50% that use duty variable control.