• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.660-666
• /
• 2015

Surface acoustic wave(SAW) device is used for transporting and patterning micro-scale particles such as cells. In this research, velocity of particles was investigated moved by SAW device with two types of interdigital electrode transducers(IDTs) under various conditions. SAW devices which have single IDTs and double IDTs were designed and fabricated. On the previous studies, resultant velocities of particles were predicted considering output power and power ratio between IDTs-shape. For more accurate prediction, power loss in SAW device and a power difference between two types of IDTs-shape were considered. Maximum error between the test results and predicted values was 5 % so the power loss must be considered in the velocity prediction of the particles.

• Smart Structures and Systems
• /
• 제5권6호
• /
• pp.663-679
• /
• 2009

The use of Micro-Electro-Mechanical Systems (MEMS) accelerometers in geotechnical instrumentation is relatively new but on the rise. This paper describes a new MEMS-based system for in situ deformation and vibration monitoring. The system has been developed in an effort to combine recent advances in the miniaturization of sensors and electronics with an established wireless infrastructure for on-line geotechnical monitoring. The concept is based on triaxial MEMS accelerometer measurements of static acceleration (angles relative to gravity) and dynamic accelerations. The dynamic acceleration sensitivity range provides signals proportional to vibration during earthquakes or construction activities. This MEMS-based in-place inclinometer system utilizes the measurements to obtain three-dimensional (3D) ground acceleration and permanent deformation profiles up to a depth of one hundred meters. Each sensor array or group of arrays can be connected to a wireless earth station to enable real-time monitoring as well as remote sensor configuration. This paper provides a technical assessment of MEMS-based in-place inclinometer systems for geotechnical instrumentation applications by reviewing the sensor characteristics and providing small- and full-scale laboratory calibration tests. A description and validation of recorded field data from an instrumented unstable slope in California is also presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집
• /
• pp.53-56
• /
• 2004

This paper describes the method of position error reduction in Linear Pulse Motor (LPM). Though the micro step exiting method is applied, the vibration and position error caused by trust distortion from mechanism still remains. This paper presents the method for reduction of position error on moving the mover at whole cycle, by compensating a scale factor through real-time control of the PWM pulse width corresponding to exiting current command and absolute position error from linear encoder.

• Earthquakes and Structures
• /
• 제12권6호
• /
• pp.689-697
• /
• 2017

Nowadays, there are a great number of various structures that have been retrofitted by using different FRP Composites. Due to this, more researches need to be conducted to know more the characteristics of these structures, not only that but also a comparison among them before and after the retrofitting is needed. In this research, a model steel structure is tested using a bench-scale earthquake simulator on the shake table, using recorded micro tremor data, in order to get the dynamic behaviors. Beams of the model steel structure are then retrofitted by using CFRP composite, and then tested on the Quanser shake table by using the recorded micro tremor data. At this stage, it is needed to evaluate the dynamic behaviors of the retrofitted model steel structure. Various types of methods of OMA, such as EFDD, SSI, etc. are used to take action in the ambient responses. Having a purpose to learn more about the effects of FRP composite, experimental model analysis of both types (retrofitted and no-retrofitted models) is conducted to evaluate their dynamic behaviors. There is a provision of ambient excitation to the shake table by using recorded micro tremor ambient vibration data on ground level. Furthermore, the Enhanced Frequency Domain decomposition is used through output-only modal identification. At the end of this study, moderate correlation is obtained between mode shapes, periods and damping ratios. The aim of this research is to show and determine the effects of CFRP Composite implementation on structural responses of the model steel structure, in terms of changing its dynamical behaviors. The frequencies for model steel structure and the retrofitted model steel structure are shown to be 34.43% in average difference. Finally, it is shown that, in order to evaluate the period and rigidity of retrofitted structures, OMA might be used.

• Steel and Composite Structures
• /
• 제28권2호
• /
• pp.223-231
• /
• 2018

Nowadays, there are a great number of various structures that have been retrofitted by using different FRP Composites. Due to this, more researches need to be conducted to know more the characteristics of these structures, not only that but also a comparison among them before and after the retrofitting is needed. In this research, a model steel structure is tested using a bench-scale earthquake simulator on the shake table, using recorded micro tremor data, in order to get the dynamic behaviors. Columns of the model steel structure are then retrofitted by using GFRP composite, and then tested on the Quanser shake table by using the recorded micro tremor data. At this stage, it is needed to evaluate the dynamic behaviors of the retrofitted model steel structure. Various types of methods of OMA, such as EFDD, SSI, etc. are used to take action in the ambient responses. Having a purpose to learn more about the effects of GFRP composite, experimental model analysis of both types (retrofitted and no-retrofitted models) is conducted to evaluate their dynamic behaviors. There is a provision of ambient excitation to the shake table by using recorded micro tremor ambient vibration data on ground level. Furthermore, the Enhanced Frequency Domain Decomposition is used through output-only modal identification. At the end of this study, moderate correlation is obtained between mode shapes, periods and damping ratios. The aim of this research is to show and determine the effects of GFRP Composite implementation on structural responses of the model steel structure, in terms of changing its dynamical behaviors. The frequencies for model steel structure and the retrofitted model steel structure are shown to be 33.916% in average difference. Finally, it is shown that, in order to evaluate the period and rigidity of retrofitted structures, OMA might be used.

• 항공우주시스템공학회지
• /
• 제16권5호
• /
• pp.1-7
• /
• 2022

최근 인공위성 임무 고도화에 따라 고성능의 전장품이 탑재되어 시스템 소요전력이 증가되고 있다. 이에 따라 충분한 전력확보를 위하여 태양전지판 크기 또한 점차 증가하고 있다. 태양전지판의 크기 증가 및 중량화는 위성체 자세 기동 시 발생하는 진동과의 커플링 등에 의해 태양전지판 탄성 진동의 크기 증가를 유발한다. 상기 진동은 힌지 및 요크를 통해 위성체에 전달되어 지향성능이 요구되는 고정밀 관측위성의 지향성능과 직결되어 고해상도 영상 획득 임무 성능을 저하시킨다. 종래에는 태양전지판의 탄성 진동을 저감시키고자 고강도 설계에 집중 또는 별도의 보강재 및 댐퍼 시스템을 적용하였다. 그러나, 이는 부피 및 무게를 증가시키며 시스템 복잡성이 증가하는 한계점이 존재한다. 본 연구에서는 상기 한계점을 극복하고자 초탄성 형상기억합금(SMA: Shape Memory Alloy) 양면에 점탄성 테이프로 박막층을 적층함으로써 댐핑 특성을 극대화하였으며, 별도 시스템 적용없이 작은 부피 및 무게로 진동을 저감하여 시스템 경량화에 기여할 수 있는 설계기법을 제안하였다. 제안한 초탄성 SMA 적층형 태양전지판 요크를 태양전지판 더미에 적용시켜 자유감쇠시험 및 온도시험을 통해 설계 유효성을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• Composites Research
• /
• 제27권2호
• /
• pp.66-71
• /
• 2014

본 연구는 GFRP 복합재료로 구성된 기둥 구조에 대하여 마이크로 역학 접근방법에 의한 섬유의 함침비율 변화에 따라 탄성계수를 예측하고 매크로 역학 기반으로 고유진동 특성을 분석하였다. 본 연구에서 제시하는 멀티 스케일 접근법에 의한 유한요소 모델은 해석의 정확성과 재료들 간의 상관관계를 상세하고 정확이 보여준다는 장점이 있다. 수치해석은 적층 갯수, 적층배열, 섬유함침비율의 변화에 따라서 고유진동의 변화를 분석하는데 중점을 두고 있다. 수치예제로부터 섬유와 모재의 재료비율은 거시적 동역학적 특성에 중요한 영향을 주고 있음을 알 수 있었다. 본 연구는 고유진동에 영향을 미치는 최적의 섬유와 모재 재료비율을 상세 분석하였으며, 해석 결과는 건설용으로서의 복합소재 기둥구조가 경제적이면서 우수한 동적 구조 성능을 만족하도록 설계하는데 기여할 수 있을 것으로 기대된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• 보존과학회지
• /
• 제17권
• /
• pp.39-56
• /
• 2005

청계천의 광통교를 이루고 있는 주 구성 암석은 조립질의 흑운모화강암으로 대부분 홍색을 띠나 후기에 보수할 때 사용된 것으로 생각되는 것들은 회색을 띠는 것도 있다. 이 암석의 주 구성광물은 석영, 사장석, 미사장석, 정장석, 그리고 흑운모 등이며 백운모와 견운모는 장석류의 변질물로, 그리고 녹니석은 흑운모의 변질물로 소량 산출된다. 이러한 변질작용에는 풍화작용도 포함되어진다. 이들 암석들은 심한 풍화작용, 오염된 하수, 그리고 차량통행에 의한 진동과 하중의 영향에 의해 심하게 훼손되어 있다. 훼손양상 중 중요한 것들을 보면 표면박리, 입자박락, 변색, 유기물 및 중금속 원소들의 오염 그리고 균열과 파손 등을 들 수 있다. 풍화와 오염에 의한 암석의 지화학적 특징의 변화를 알기 위하여 XRD와 SEM/EDX보를 이용하여 분석하였다. 이러한 분석 결과는 풍화와 오염물질들에 의해 점토광물, 석고 및 인회석 등이 2차적으로 주로 생성되어 있으며 매우 드물게 소금(NaCl)과 방해석 결정도 생성되어 있음을 보여 주고 있다. 이들은 Ca, P, S 및 Cl과 F 등이 오염물질로 도입되어 2차 생성광물들을 형성시킨 것으로 판단된다. 또한 Cr, Pb, Pd, W, La, Zn 및 Nd등과 같은 중금속 원소들도 부분적으로 오염물질로 암석표면에 흡착되어 있음을 나타내고 있다. 부재들 간의 접촉부들은 많은 경우 가장자리들이 작게 깨어져 나가거나 파손 또는 균열들이 발달되어 있는데 이들은 주로 차량 통행에 의한 하중과 진동의 영향에 의한 것으로 판단된다.